Geekble_Oscillator - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Geekble_Oscillator

Version: 1.0.3
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Frequency_Sweep
arduino:avr:uno 1.8.4	Yes	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/Frequency_Sweep

Result: PASS

Sketch uses 612 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library Geekble_Oscillator claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In constructor 'Geekble_Oscillator::Geekble_Oscillator()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:12:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:13:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:14:3: error: 'TCNT2' was not declared in this scope
   TCNT2 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:15:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:15:3: note: suggested alternative: 'TIMER'
   TIMSK2 = 0;
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:18:19: error: 'WGM20' was not declared in this scope
   TCCR2A |= (3 << WGM20);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:19:19: error: 'WGM22' was not declared in this scope
   TCCR2B |= (1 << WGM22);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In member function 'void Geekble_Oscillator::Divide_8MHz_by(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:35:3: error: 'OCR2A' was not declared in this scope
   OCR2A = (Divide_Variable - 1);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:36:3: error: 'TCNT2' was not declared in this scope
   TCNT2 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In member function 'void Geekble_Oscillator::Run(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:5: error: 'DDRB' was not declared in this scope
     DDRB |= (1 << PINB3);
     ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:5: note: suggested alternative: 'DIR'
     DDRB |= (1 << PINB3);
     ^~~~
     DIR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:19: error: 'PINB3' was not declared in this scope
     DDRB |= (1 << PINB3);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:19: note: suggested alternative: 'PIN_A3'
     DDRB |= (1 << PINB3);
                   ^~~~~
                   PIN_A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:21: error: 'COM2A0' was not declared in this scope
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
                     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:21: error: 'CS20' was not declared in this scope
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
                     ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:21: note: suggested alternative: '._20'
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
                     ^~~~
                     ._20
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:22: error: 'COM2A0' was not declared in this scope
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
                      ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:22: error: 'CS20' was not declared in this scope
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:22: note: suggested alternative: '._20'
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
                      ^~~~
                      ._20

examples/Frequency_Sweep

Result: FAIL

WARNING: library Geekble_Oscillator claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino:35:9: error: '_delay_ms' was not declared in this scope
         _delay_ms(1000);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino:35:9: note: suggested alternative: 'delay'
         _delay_ms(1000);
         ^~~~~~~~~
         delay

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library Geekble_Oscillator claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In constructor 'Geekble_Oscillator::Geekble_Oscillator()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:12:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:12:3: note: suggested alternative: 'TCB2'
   TCCR2A = 0;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:13:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:13:3: note: suggested alternative: 'TCB2'
   TCCR2B = 0;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:14:3: error: 'TCNT2' was not declared in this scope
   TCNT2 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:14:3: note: suggested alternative: 'TCB2'
   TCNT2 = 0;
   ^~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:15:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:15:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 = 0;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:18:19: error: 'WGM20' was not declared in this scope
   TCCR2A |= (3 << WGM20);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:19:19: error: 'WGM22' was not declared in this scope
   TCCR2B |= (1 << WGM22);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In member function 'void Geekble_Oscillator::Divide_8MHz_by(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:35:3: error: 'OCR2A' was not declared in this scope
   OCR2A = (Divide_Variable - 1);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:36:3: error: 'TCNT2' was not declared in this scope
   TCNT2 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:36:3: note: suggested alternative: 'TCB2'
   TCNT2 = 0;
   ^~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In member function 'void Geekble_Oscillator::Run(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:19: error: 'PINB3' was not declared in this scope
     DDRB |= (1 << PINB3);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:19: note: suggested alternative: 'PIN3'
     DDRB |= (1 << PINB3);
                   ^~~~~
                   PIN3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:5: note: suggested alternative: 'TCB2'
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
     ^~~~~~
     TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:21: error: 'COM2A0' was not declared in this scope
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
                     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:5: note: suggested alternative: 'TCB2'
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
     ^~~~~~
     TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:21: error: 'CS20' was not declared in this scope
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
                     ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:5: note: suggested alternative: 'TCB2'
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
     ^~~~~~
     TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:22: error: 'COM2A0' was not declared in this scope
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
                      ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:5: note: suggested alternative: 'TCB2'
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
     ^~~~~~
     TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:22: error: 'CS20' was not declared in this scope
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
                      ^~~~

examples/Frequency_Sweep

Result: FAIL

WARNING: library Geekble_Oscillator claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino:35:9: error: '_delay_ms' was not declared in this scope
         _delay_ms(1000);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino:35:9: note: suggested alternative: 'delay'
         _delay_ms(1000);
         ^~~~~~~~~
         delay

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library Geekble_Oscillator claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In constructor 'Geekble_Oscillator::Geekble_Oscillator()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:12:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:12:3: note: suggested alternative: 'TCC2'
   TCCR2A = 0;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:13:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:13:3: note: suggested alternative: 'TCC2'
   TCCR2B = 0;
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:14:3: error: 'TCNT2' was not declared in this scope
   TCNT2 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:14:3: note: suggested alternative: 'TCC2'
   TCNT2 = 0;
   ^~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:15:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 = 0;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:18:19: error: 'WGM20' was not declared in this scope
   TCCR2A |= (3 << WGM20);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:19:19: error: 'WGM22' was not declared in this scope
   TCCR2B |= (1 << WGM22);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In member function 'void Geekble_Oscillator::Divide_8MHz_by(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:35:3: error: 'OCR2A' was not declared in this scope
   OCR2A = (Divide_Variable - 1);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:36:3: error: 'TCNT2' was not declared in this scope
   TCNT2 = 0;
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:36:3: note: suggested alternative: 'TCC2'
   TCNT2 = 0;
   ^~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In member function 'void Geekble_Oscillator::Run(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:5: error: 'DDRB' was not declared in this scope
     DDRB |= (1 << PINB3);
     ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:19: error: 'PINB3' was not declared in this scope
     DDRB |= (1 << PINB3);
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:19: note: suggested alternative: 'PIN_A3'
     DDRB |= (1 << PINB3);
                   ^~~~~
                   PIN_A3
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:5: note: suggested alternative: 'TCC2'
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
     ^~~~~~
     TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:21: error: 'COM2A0' was not declared in this scope
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
                     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:5: note: suggested alternative: 'TCC2'
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
     ^~~~~~
     TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:21: error: 'CS20' was not declared in this scope
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
                     ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:5: note: suggested alternative: 'TCC2'
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
     ^~~~~~
     TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:22: error: 'COM2A0' was not declared in this scope
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
                      ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:5: note: suggested alternative: 'TCC2'
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
     ^~~~~~
     TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:22: error: 'CS20' was not declared in this scope
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
                      ^~~~

examples/Frequency_Sweep

Result: FAIL

WARNING: library Geekble_Oscillator claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino:35:9: error: '_delay_ms' was not declared in this scope
         _delay_ms(1000);
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino:35:9: note: suggested alternative: 'delay'
         _delay_ms(1000);
         ^~~~~~~~~
         delay

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library Geekble_Oscillator claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In constructor 'Geekble_Oscillator::Geekble_Oscillator()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:12:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:13:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:14:3: error: 'TCNT2' was not declared in this scope
   TCNT2 = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:15:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:18:19: error: 'WGM20' was not declared in this scope
   TCCR2A |= (3 << WGM20);
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:19:19: error: 'WGM22' was not declared in this scope
   TCCR2B |= (1 << WGM22);
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In member function 'void Geekble_Oscillator::Divide_8MHz_by(uint16_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:35:3: error: 'OCR2A' was not declared in this scope
   OCR2A = (Divide_Variable - 1);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:36:3: error: 'TCNT2' was not declared in this scope
   TCNT2 = 0;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp: In member function 'void Geekble_Oscillator::Run(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:5: error: 'DDRB' was not declared in this scope
     DDRB |= (1 << PINB3);
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:44:19: error: 'PINB3' was not declared in this scope
     DDRB |= (1 << PINB3);
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:45:21: error: 'COM2A0' was not declared in this scope
     TCCR2A |= (1 << COM2A0);  // Toggle OC2A on compare match
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:46:21: error: 'CS20' was not declared in this scope
     TCCR2B |= (1 << CS20);    // Run Timer Counter, No Prescaler
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:50:22: error: 'COM2A0' was not declared in this scope
     TCCR2A &= ~(3 << COM2A0); // Normal port operation, OC2A disconnected.
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/src/Geekble_Oscillator.cpp:51:22: error: 'CS20' was not declared in this scope
     TCCR2B &= ~(7 << CS20);   // Stop Timer Counter
                      ^

examples/Frequency_Sweep

Result: FAIL

WARNING: library Geekble_Oscillator claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Geekble_Oscillator/examples/Frequency_Sweep/Frequency_Sweep.ino:35:23: error: '_delay_ms' was not declared in this scope
         _delay_ms(1000);
                       ^