This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.2.3
More details
| Board | Claims compatibility | Inclusion | LIS3DHTR_SPI |
LIS3DHTR_SPI_ADC |
LIS3DHTR_SPI_AcceleratorReadings |
LIS3DHTR_SPI_Temperature |
LIS3DHTR_IIC |
LIS3DHTR_IIC_ADC |
LIS3DHTR_IIC_AcceleratorReadings |
LIS3DHTR_IIC_Temperature |
|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5036 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 443 bytes (21%) of dynamic memory, leaving 1605 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5032 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 455 bytes (22%) of dynamic memory, leaving 1593 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6724 bytes (20%) of program storage space. Maximum is 32256 bytes. Global variables use 461 bytes (22%) of dynamic memory, leaving 1587 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5014 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 443 bytes (21%) of dynamic memory, leaving 1605 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5126 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 411 bytes (20%) of dynamic memory, leaving 1637 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5128 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 423 bytes (20%) of dynamic memory, leaving 1625 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6820 bytes (21%) of program storage space. Maximum is 32256 bytes. Global variables use 429 bytes (20%) of dynamic memory, leaving 1619 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5126 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 411 bytes (20%) of dynamic memory, leaving 1637 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: error: 'SPI_CLOCK_DIV4' was not declared in this scope
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:31: note: suggested alternative: 'SPI_CPOL_1'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~
SPI_CPOL_1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: PASS
Sketch uses 5482 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 335 bytes (5%) of dynamic memory, leaving 5809 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 8378 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 511 bytes (8%) of dynamic memory, leaving 5633 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 8380 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 511 bytes (8%) of dynamic memory, leaving 5633 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 10036 bytes (20%) of program storage space. Maximum is 49152 bytes.
Global variables use 511 bytes (8%) of dynamic memory, leaving 5633 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 8356 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 511 bytes (8%) of dynamic memory, leaving 5633 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 8426 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 565 bytes (9%) of dynamic memory, leaving 5579 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 8434 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 565 bytes (9%) of dynamic memory, leaving 5579 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 10090 bytes (20%) of program storage space. Maximum is 49152 bytes.
Global variables use 565 bytes (9%) of dynamic memory, leaving 5579 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
Sketch uses 8426 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 565 bytes (9%) of dynamic memory, leaving 5579 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.h:33:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = SPIClassMegaAVR; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:488:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In instantiation of 'void LIS3DHTR<T>::readRegisterRegion(uint8_t*, uint8_t, uint8_t) [with T = TwoWire; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:489:16: required from here
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: FAIL
This library has no main header file so an empty one was created.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp: In member function 'void LIS3DHTR<T>::begin(arduino::SPIClass&, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:49:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setClockDivider'
_spi_com->setClockDivider(SPI_CLOCK_DIV4);
^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:51:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setBitOrder'
_spi_com->setBitOrder(MSBFIRST);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove-3-Axis-Digital-Accelerometer-2g-to-16g-LIS3DHTR/src/LIS3DHTR.cpp:55:15: error: 'arduino::SPIClass {aka class arduino::HardwareSPI}' has no member named 'setDataMode'
_spi_com->setDataMode(SPI_MODE3);
^~~~~~~~~~~
Result: PASS
Sketch uses 204250 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13912 bytes (4%) of dynamic memory, leaving 313768 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216014 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216102 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 216626 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 215966 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14176 bytes (4%) of dynamic memory, leaving 313504 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217450 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217542 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 218066 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 217450 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14224 bytes (4%) of dynamic memory, leaving 313456 bytes for local variables. Maximum is 327680 bytes.