Grove - Air quality sensor - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Grove - Air quality sensor

Version: 1.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	AirQuality_Sensor
arduino:avr:uno 1.8.4	Yes	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/AirQuality_Sensor

Result: PASS

Sketch uses 2838 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 392 bytes (19%) of dynamic memory, leaving 1656 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

WARNING: library Grove_-_Air_quality_sensor claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp: In member function 'void AirQuality::init(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:80:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A=0;//normal model
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:81:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B=0x07;//set clock as 1024*(1/16M)
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:82:5: error: 'TIMSK2' was not declared in this scope
     TIMSK2=0x01;//enable overflow interrupt
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:82:5: note: suggested alternative: 'TIMER'
     TIMSK2=0x01;//enable overflow interrupt
     ^~~~~~
     TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:84:5: error: 'sei' was not declared in this scope
     sei();
     ^~~
Multiple libraries were found for "AirQuality.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATmega32U4_Grove_Air_quality_sensor

examples/AirQuality_Sensor

Result: FAIL

WARNING: library Grove_-_Air_quality_sensor claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/examples/AirQuality_Sensor/AirQuality_Sensor.ino:30:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/examples/AirQuality_Sensor/AirQuality_Sensor.ino:30:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "AirQuality.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATmega32U4_Grove_Air_quality_sensor

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

WARNING: library Grove_-_Air_quality_sensor claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp: In member function 'void AirQuality::init(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:80:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A=0;//normal model
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:80:5: note: suggested alternative: 'TCB2'
     TCCR2A=0;//normal model
     ^~~~~~
     TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:81:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B=0x07;//set clock as 1024*(1/16M)
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:81:5: note: suggested alternative: 'TCB2'
     TCCR2B=0x07;//set clock as 1024*(1/16M)
     ^~~~~~
     TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:82:5: error: 'TIMSK2' was not declared in this scope
     TIMSK2=0x01;//enable overflow interrupt
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:82:5: note: suggested alternative: 'TIMERB2'
     TIMSK2=0x01;//enable overflow interrupt
     ^~~~~~
     TIMERB2
Multiple libraries were found for "AirQuality.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATmega32U4_Grove_Air_quality_sensor

examples/AirQuality_Sensor

Result: FAIL

WARNING: library ATmega32U4_Grove_Air_quality_sensor claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/examples/AirQuality_Sensor/AirQuality_Sensor.ino: In function 'void TIMER2_OVF_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/examples/AirQuality_Sensor/AirQuality_Sensor.ino:38:20: error: no match for 'operator^' (operand types are 'PORTBClass' and 'int')
         PORTB=PORTB^0x20;
               ~~~~~^~~~~
Multiple libraries were found for "AirQuality.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATmega32U4_Grove_Air_quality_sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

WARNING: library Grove_-_Air_quality_sensor claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp: In member function 'void AirQuality::init(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:80:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A=0;//normal model
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:80:5: note: suggested alternative: 'TCC2'
     TCCR2A=0;//normal model
     ^~~~~~
     TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:81:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B=0x07;//set clock as 1024*(1/16M)
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:81:5: note: suggested alternative: 'TCC2'
     TCCR2B=0x07;//set clock as 1024*(1/16M)
     ^~~~~~
     TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:82:5: error: 'TIMSK2' was not declared in this scope
     TIMSK2=0x01;//enable overflow interrupt
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:84:5: error: 'sei' was not declared in this scope
     sei();
     ^~~
Multiple libraries were found for "AirQuality.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATmega32U4_Grove_Air_quality_sensor

examples/AirQuality_Sensor

Result: FAIL

WARNING: library ATmega32U4_Grove_Air_quality_sensor claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/examples/AirQuality_Sensor/AirQuality_Sensor.ino:30:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/examples/AirQuality_Sensor/AirQuality_Sensor.ino:30:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "AirQuality.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATmega32U4_Grove_Air_quality_sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

WARNING: library Grove_-_Air_quality_sensor claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp: In member function 'void AirQuality::init(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:80:5: error: 'TCCR2A' was not declared in this scope
     TCCR2A=0;//normal model
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:81:5: error: 'TCCR2B' was not declared in this scope
     TCCR2B=0x07;//set clock as 1024*(1/16M)
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/AirQuality.cpp:82:5: error: 'TIMSK2' was not declared in this scope
     TIMSK2=0x01;//enable overflow interrupt
     ^
Multiple libraries were found for "AirQuality.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATmega32U4_Grove_Air_quality_sensor

examples/AirQuality_Sensor

Result: FAIL

WARNING: library Grove_-_Air_quality_sensor claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/examples/AirQuality_Sensor/AirQuality_Sensor.ino:30:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor/examples/AirQuality_Sensor/AirQuality_Sensor.ino:30:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER2_OVF_vect)
    ^
Multiple libraries were found for "AirQuality.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_-_Air_quality_sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ATmega32U4_Grove_Air_quality_sensor