Guarateca_Demo - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Guarateca_Demo

Version: 1.0
More details

Compatibility matrix

Board Claims compatibility Inclusion 
SensorUltrassonico
 
Servo
 
Button
 
Buzzer
 
Giroscopio
 
Led
 
MotorShield
 
SensorRefletancia
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS PASS PASS PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes PASS PASS PASS PASS PASS PASS PASS PASS PASS
arduino:megaavr:nona4809
1.8.7 		Yes PASS PASS PASS PASS PASS PASS PASS PASS PASS
arduino:samd:mkrwifi1010
1.8.12 		Yes PASS PASS PASS PASS PASS PASS PASS PASS PASS
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 1918 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 139 bytes (6%) of dynamic memory, leaving 1909 bytes for local variables. Maximum is 2048 bytes.

examples/Button

Result: PASS 

Sketch uses 3178 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 333 bytes (16%) of dynamic memory, leaving 1715 bytes for local variables. Maximum is 2048 bytes.

examples/Buzzer

Result: PASS 

Sketch uses 6998 bytes (21%) of program storage space. Maximum is 32256 bytes.
Global variables use 1116 bytes (54%) of dynamic memory, leaving 932 bytes for local variables. Maximum is 2048 bytes.

examples/Giroscopio

Result: PASS 

Sketch uses 6568 bytes (20%) of program storage space. Maximum is 32256 bytes.
Global variables use 493 bytes (24%) of dynamic memory, leaving 1555 bytes for local variables. Maximum is 2048 bytes.

examples/Led

Result: PASS 

Sketch uses 2258 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 140 bytes (6%) of dynamic memory, leaving 1908 bytes for local variables. Maximum is 2048 bytes.

examples/MotorShield

Result: PASS 

Sketch uses 3072 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 160 bytes (7%) of dynamic memory, leaving 1888 bytes for local variables. Maximum is 2048 bytes.

examples/SensorRefletancia

Result: PASS 

Sketch uses 3334 bytes (10%) of program storage space. Maximum is 32256 bytes.
Global variables use 317 bytes (15%) of dynamic memory, leaving 1731 bytes for local variables. Maximum is 2048 bytes.

examples/SensorUltrassonico

Result: PASS 

Sketch uses 5172 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 347 bytes (16%) of dynamic memory, leaving 1701 bytes for local variables. Maximum is 2048 bytes.

examples/Servo

Result: PASS 

Sketch uses 3368 bytes (10%) of program storage space. Maximum is 32256 bytes.
Global variables use 141 bytes (6%) of dynamic memory, leaving 1907 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS 

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/Button

Result: PASS 

Sketch uses 82068 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44224 bytes (16%) of dynamic memory, leaving 226112 bytes for local variables. Maximum is 270336 bytes.

examples/Buzzer

Result: PASS 

Sketch uses 85466 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 45556 bytes (16%) of dynamic memory, leaving 224780 bytes for local variables. Maximum is 270336 bytes.

examples/Giroscopio

Result: PASS 

Sketch uses 83134 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44252 bytes (16%) of dynamic memory, leaving 226084 bytes for local variables. Maximum is 270336 bytes.

examples/Led

Result: PASS 

Sketch uses 84228 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44224 bytes (16%) of dynamic memory, leaving 226112 bytes for local variables. Maximum is 270336 bytes.

examples/MotorShield

Result: PASS 

Sketch uses 86198 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44268 bytes (16%) of dynamic memory, leaving 226068 bytes for local variables. Maximum is 270336 bytes.

examples/SensorRefletancia

Result: PASS 

Sketch uses 82558 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44296 bytes (16%) of dynamic memory, leaving 226040 bytes for local variables. Maximum is 270336 bytes.

examples/SensorUltrassonico

Result: PASS 

Sketch uses 83292 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44224 bytes (16%) of dynamic memory, leaving 226112 bytes for local variables. Maximum is 270336 bytes.

examples/Servo

Result: PASS 

Sketch uses 82138 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44224 bytes (16%) of dynamic memory, leaving 226112 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS 

Sketch uses 3274 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 322 bytes (5%) of dynamic memory, leaving 5822 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/Button

Result: PASS 

Sketch uses 4968 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 478 bytes (7%) of dynamic memory, leaving 5666 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/Buzzer

Result: PASS 

Sketch uses 7744 bytes (15%) of program storage space. Maximum is 49152 bytes.
Global variables use 365 bytes (5%) of dynamic memory, leaving 5779 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/Giroscopio

Result: PASS 

Sketch uses 6979 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 503 bytes (8%) of dynamic memory, leaving 5641 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/Led

Result: PASS 

Sketch uses 3816 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 323 bytes (5%) of dynamic memory, leaving 5821 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/MotorShield

Result: PASS 

Sketch uses 4638 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 343 bytes (5%) of dynamic memory, leaving 5801 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/SensorRefletancia

Result: PASS 

Sketch uses 5141 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 478 bytes (7%) of dynamic memory, leaving 5666 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/SensorUltrassonico

Result: PASS 

Sketch uses 7076 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 480 bytes (7%) of dynamic memory, leaving 5664 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

examples/Servo

Result: PASS 

Sketch uses 4876 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 324 bytes (5%) of dynamic memory, leaving 5820 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:64:12: note: candidate 1: size_t TwoWire::requestFrom(int, int, int)
     size_t requestFrom(int, int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:62:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t, bool)
     size_t requestFrom(uint8_t, size_t, bool);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 13740 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

examples/Button

Result: PASS 

Sketch uses 13992 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

examples/Buzzer

Result: PASS 

Sketch uses 17684 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 4940 bytes (15%) of dynamic memory, leaving 27828 bytes for local variables. Maximum is 32768 bytes.

examples/Giroscopio

Result: PASS 

Sketch uses 22520 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3620 bytes (11%) of dynamic memory, leaving 29148 bytes for local variables. Maximum is 32768 bytes.

examples/Led

Result: PASS 

Sketch uses 16164 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

examples/MotorShield

Result: PASS 

Sketch uses 14836 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3676 bytes (11%) of dynamic memory, leaving 29092 bytes for local variables. Maximum is 32768 bytes.

examples/SensorRefletancia

Result: PASS 

Sketch uses 14052 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

examples/SensorUltrassonico

Result: PASS 

Sketch uses 22560 bytes (8%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

examples/Servo

Result: PASS 

Sketch uses 19228 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3596 bytes (10%) of dynamic memory, leaving 29172 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/Button

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/Buzzer

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/Giroscopio

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/Led

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/MotorShield

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/SensorRefletancia

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/SensorUltrassonico

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^

examples/Servo

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void Buzzer::mario()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:145:47: error: 'tone' was not declared in this scope
         tone(pino, melodia[nota],duracaodanota);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:150:16: error: 'noTone' was not declared in this scope
     noTone(pino);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In constructor 'MotorShield::MotorShield(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:181:25: error: 'analogWrite' was not declared in this scope
     analogWrite(_PMW1, 0);//seta a corrente do pino PMW1, como 0
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp: In member function 'void MotorShield::controleDeCorrente(uint8_t, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:267:40: error: 'analogWrite' was not declared in this scope
             analogWrite(_PMW1, corrente);
                                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.h:68:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Guarateca_Demo/src/GuaraTeca_Demo.cpp:18:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h: In member function 'void SensorGiroscopio::_ObtemDados()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:102:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int, int)
     uint8_t requestFrom(int address, int size, int sendStop);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/Wire/src/Wire.h:97:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint16_t, uint8_t, bool)
     uint8_t requestFrom(uint16_t address, uint8_t size, bool sendStop);
             ^