GyverMAX7219 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

GyverMAX7219

Compatibility matrix

Board	Claims compatibility	Inclusion	demo	display	emoji
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 446 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/demo

Result: PASS

Sketch uses 4446 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 60 bytes (2%) of dynamic memory, leaving 1988 bytes for local variables. Maximum is 2048 bytes.

examples/display

Result: PASS

Sketch uses 8020 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 211 bytes (10%) of dynamic memory, leaving 1837 bytes for local variables. Maximum is 2048 bytes.

examples/emoji

Result: PASS

Sketch uses 4044 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 60 bytes (2%) of dynamic memory, leaving 1988 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib3288015759/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h: In member function 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::F_fastShiftOut(uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:204:51: error: no matching function for call to 'shiftOut(uint8_t&, uint8_t&, uint8_t&, uint8_t&)'
         shiftOut(dataPin, clockPin, bitOrder, data);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-6731F08BB8BE845B23E289FC82622E1C/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:109:6: note: candidate: void shiftOut(pin_size_t, pin_size_t, BitOrder, uint8_t) <near match>
 void shiftOut(pin_size_t dataPin, pin_size_t clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:109:6: note:   conversion of argument 3 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:115:0,
                 from /tmp/arduino-sketch-6731F08BB8BE845B23E289FC82622E1C/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:32:6: note: candidate: void shiftOut(PinName, PinName, BitOrder, uint8_t) <near match>
 void shiftOut(PinName dataPin, PinName clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:32:6: note:   conversion of argument 3 would be ill-formed:

examples/demo

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/demo/demo.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h: In member function 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::F_fastShiftOut(uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:204:51: error: no matching function for call to 'shiftOut(uint8_t&, uint8_t&, uint8_t&, uint8_t&)'
         shiftOut(dataPin, clockPin, bitOrder, data);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-C1AF407130EA7C9486B09127353035AF/sketch/demo.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:109:6: note: candidate: void shiftOut(pin_size_t, pin_size_t, BitOrder, uint8_t) <near match>
 void shiftOut(pin_size_t dataPin, pin_size_t clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:109:6: note:   conversion of argument 3 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:115:0,
                 from /tmp/arduino-sketch-C1AF407130EA7C9486B09127353035AF/sketch/demo.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:32:6: note: candidate: void shiftOut(PinName, PinName, BitOrder, uint8_t) <near match>
 void shiftOut(PinName dataPin, PinName clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:32:6: note:   conversion of argument 3 would be ill-formed:

examples/display

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/display/display.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h: In member function 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::F_fastShiftOut(uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:204:51: error: no matching function for call to 'shiftOut(uint8_t&, uint8_t&, uint8_t&, uint8_t&)'
         shiftOut(dataPin, clockPin, bitOrder, data);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-752449B607D9512511E81D1B6BE125F8/sketch/display.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:109:6: note: candidate: void shiftOut(pin_size_t, pin_size_t, BitOrder, uint8_t) <near match>
 void shiftOut(pin_size_t dataPin, pin_size_t clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:109:6: note:   conversion of argument 3 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:115:0,
                 from /tmp/arduino-sketch-752449B607D9512511E81D1B6BE125F8/sketch/display.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:32:6: note: candidate: void shiftOut(PinName, PinName, BitOrder, uint8_t) <near match>
 void shiftOut(PinName dataPin, PinName clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:32:6: note:   conversion of argument 3 would be ill-formed:

examples/emoji

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h: In member function 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::F_fastShiftOut(uint8_t, uint8_t, uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:204:51: error: no matching function for call to 'shiftOut(uint8_t&, uint8_t&, uint8_t&, uint8_t&)'
         shiftOut(dataPin, clockPin, bitOrder, data);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-D91EEBC74BE2B19233875A110728D892/sketch/emoji.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:109:6: note: candidate: void shiftOut(pin_size_t, pin_size_t, BitOrder, uint8_t) <near match>
 void shiftOut(pin_size_t dataPin, pin_size_t clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:109:6: note:   conversion of argument 3 would be ill-formed:
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:115:0,
                 from /tmp/arduino-sketch-D91EEBC74BE2B19233875A110728D892/sketch/emoji.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:32:6: note: candidate: void shiftOut(PinName, PinName, BitOrder, uint8_t) <near match>
 void shiftOut(PinName dataPin, PinName clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/overloads.h:32:6: note:   conversion of argument 3 would be ill-formed:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:64:36: error: invalid conversion from 'uint16_t {aka short unsigned int}' to 'const uint8_t* {aka const unsigned char*}' [-fpermissive]
     mtrx.drawBitmap(0, 0, ptr, 8, 8);
                                    ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverGFX/src/GyverGFX.h:50:10: note:   initializing argument 3 of 'void GyverGFX::drawBitmap(int, int, const uint8_t*, int, int, uint8_t, byte)'
     void drawBitmap(int x, int y, const uint8_t *frame, int width, int height, uint8_t invert = 0, byte mode = 0);  // битмап
          ^~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3246 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 40 bytes (0%) of dynamic memory, leaving 6104 bytes for local variables. Maximum is 6144 bytes.

examples/demo

Result: PASS

Sketch uses 7058 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 148 bytes (2%) of dynamic memory, leaving 5996 bytes for local variables. Maximum is 6144 bytes.

examples/display

Result: PASS

Sketch uses 10529 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 279 bytes (4%) of dynamic memory, leaving 5865 bytes for local variables. Maximum is 6144 bytes.

examples/emoji

Result: PASS

Sketch uses 6676 bytes (13%) of program storage space. Maximum is 49152 bytes.
Global variables use 148 bytes (2%) of dynamic memory, leaving 5996 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13336 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3068 bytes (9%) of dynamic memory, leaving 29700 bytes for local variables. Maximum is 32768 bytes.

examples/demo

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/demo/demo.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h: In instantiation of 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::F_fastShiftOut(uint8_t, uint8_t, uint8_t, uint8_t) [with unsigned char width = 1; unsigned char height = 1; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:213:27:   required from 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::sendData(uint8_t, uint8_t) [with unsigned char width = 1; unsigned char height = 1; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0; uint8_t = unsigned char]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:104:55:   required from 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::update() [with unsigned char width = 1; unsigned char height = 1; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/demo/demo.ino:20:15:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:204:17: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
         shiftOut(dataPin, clockPin, bitOrder, data);
         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-C1AF407130EA7C9486B09127353035AF/sketch/demo.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:108:6: note:   initializing argument 3 of 'void shiftOut(pin_size_t, pin_size_t, BitOrder, uint8_t)'
 void shiftOut(pin_size_t dataPin, pin_size_t clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~

examples/display

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/display/display.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h: In instantiation of 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::F_fastShiftOut(uint8_t, uint8_t, uint8_t, uint8_t) [with unsigned char width = 4; unsigned char height = 2; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:213:27:   required from 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::sendData(uint8_t, uint8_t) [with unsigned char width = 4; unsigned char height = 2; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0; uint8_t = unsigned char]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:104:55:   required from 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::update() [with unsigned char width = 4; unsigned char height = 2; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/display/display.ino:17:15:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:204:17: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
         shiftOut(dataPin, clockPin, bitOrder, data);
         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-752449B607D9512511E81D1B6BE125F8/sketch/display.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:108:6: note:   initializing argument 3 of 'void shiftOut(pin_size_t, pin_size_t, BitOrder, uint8_t)'
 void shiftOut(pin_size_t dataPin, pin_size_t clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~

examples/emoji

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:64:36: error: invalid conversion from 'uint16_t {aka short unsigned int}' to 'const uint8_t* {aka const unsigned char*}' [-fpermissive]
     mtrx.drawBitmap(0, 0, ptr, 8, 8);
                                    ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverGFX/src/GyverGFX.h:50:10: note:   initializing argument 3 of 'void GyverGFX::drawBitmap(int, int, const uint8_t*, int, int, uint8_t, byte)'
     void drawBitmap(int x, int y, const uint8_t *frame, int width, int height, uint8_t invert = 0, byte mode = 0);  // битмап
          ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h: In instantiation of 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::F_fastShiftOut(uint8_t, uint8_t, uint8_t, uint8_t) [with unsigned char width = 1; unsigned char height = 1; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:213:27:   required from 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::sendData(uint8_t, uint8_t) [with unsigned char width = 1; unsigned char height = 1; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0; uint8_t = unsigned char]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:104:55:   required from 'void MAX7219<width, height, CSpin, DATpin, CLKpin>::update() [with unsigned char width = 1; unsigned char height = 1; unsigned char CSpin = 5; unsigned char DATpin = 0; unsigned char CLKpin = 0]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:57:15:   required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:204:17: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
         shiftOut(dataPin, clockPin, bitOrder, data);
         ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-D91EEBC74BE2B19233875A110728D892/sketch/emoji.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:108:6: note:   initializing argument 3 of 'void shiftOut(pin_size_t, pin_size_t, BitOrder, uint8_t)'
 void shiftOut(pin_size_t dataPin, pin_size_t clockPin, BitOrder bitOrder, uint8_t val);
      ^~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198828 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13112 bytes (4%) of dynamic memory, leaving 314568 bytes for local variables. Maximum is 327680 bytes.

examples/demo

Result: PASS

Sketch uses 205010 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13400 bytes (4%) of dynamic memory, leaving 314280 bytes for local variables. Maximum is 327680 bytes.

examples/display

Result: PASS

Sketch uses 207814 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13600 bytes (4%) of dynamic memory, leaving 314080 bytes for local variables. Maximum is 327680 bytes.

examples/emoji

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:64:36: error: invalid conversion from 'uint16_t {aka short unsigned int}' to 'const uint8_t* {aka const unsigned char*}' [-fpermissive]
     mtrx.drawBitmap(0, 0, ptr, 8, 8);
                                    ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/src/GyverMAX7219.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMAX7219/examples/emoji/emoji.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverGFX/src/GyverGFX.h:50:10: note:   initializing argument 3 of 'void GyverGFX::drawBitmap(int, int, const uint8_t*, int, int, uint8_t, byte)'
     void drawBitmap(int x, int y, const uint8_t *frame, int width, int height, uint8_t invert = 0, byte mode = 0);  // битмап
          ^