GyverMotor - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

GyverMotor

Version: 3.2.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	motor_control_10bit	motor_control_31kHz	motor_demo	multi_motor	multi_motor_tank	smooth_control
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/motor_control_10bit

Result: PASS

Sketch uses 3176 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 41 bytes (2%) of dynamic memory, leaving 2007 bytes for local variables. Maximum is 2048 bytes.

examples/motor_control_31kHz

Result: PASS

Sketch uses 2886 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 41 bytes (2%) of dynamic memory, leaving 2007 bytes for local variables. Maximum is 2048 bytes.

examples/motor_demo

Result: PASS

Sketch uses 3208 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 41 bytes (2%) of dynamic memory, leaving 2007 bytes for local variables. Maximum is 2048 bytes.

examples/multi_motor

Result: PASS

Sketch uses 2934 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 73 bytes (3%) of dynamic memory, leaving 1975 bytes for local variables. Maximum is 2048 bytes.

examples/multi_motor_tank

Result: PASS

Sketch uses 2936 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 73 bytes (3%) of dynamic memory, leaving 1975 bytes for local variables. Maximum is 2048 bytes.

examples/smooth_control

Result: PASS

Sketch uses 4424 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 220 bytes (10%) of dynamic memory, leaving 1828 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/motor_control_10bit

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:26:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0b00000011;  // 10bit
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:27:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0b00001001;  // x1 fast pwm
   ^~~~~~

examples/motor_control_31kHz

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:26:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 0b00000001;  // x1
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:27:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = 0b00000001;  // phase correct
   ^~~~~~

examples/motor_demo

Result: PASS

Sketch uses 84974 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43560 bytes (16%) of dynamic memory, leaving 226776 bytes for local variables. Maximum is 270336 bytes.

examples/multi_motor

Result: PASS

Sketch uses 84912 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43600 bytes (16%) of dynamic memory, leaving 226736 bytes for local variables. Maximum is 270336 bytes.

examples/multi_motor_tank

Result: PASS

Sketch uses 84912 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43600 bytes (16%) of dynamic memory, leaving 226736 bytes for local variables. Maximum is 270336 bytes.

examples/smooth_control

Result: PASS

Sketch uses 85092 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43560 bytes (16%) of dynamic memory, leaving 226776 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/motor_control_10bit

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:26:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0b00000011;  // 10bit
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:26:3: note: suggested alternative: 'TCB1'
   TCCR1A = 0b00000011;  // 10bit
   ^~~~~~
   TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:27:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0b00001001;  // x1 fast pwm
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:27:3: note: suggested alternative: 'TCB1'
   TCCR1B = 0b00001001;  // x1 fast pwm
   ^~~~~~
   TCB1

examples/motor_control_31kHz

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:26:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 0b00000001;  // x1
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:26:3: note: suggested alternative: 'TCB2'
   TCCR2B = 0b00000001;  // x1
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:27:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = 0b00000001;  // phase correct
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:27:3: note: suggested alternative: 'TCB2'
   TCCR2A = 0b00000001;  // phase correct
   ^~~~~~
   TCB2

examples/motor_demo

Result: PASS

Sketch uses 3690 bytes (7%) of program storage space. Maximum is 49152 bytes.
Global variables use 54 bytes (0%) of dynamic memory, leaving 6090 bytes for local variables. Maximum is 6144 bytes.

examples/multi_motor

Result: PASS

Sketch uses 3414 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 86 bytes (1%) of dynamic memory, leaving 6058 bytes for local variables. Maximum is 6144 bytes.

examples/multi_motor_tank

Result: PASS

Sketch uses 3412 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 86 bytes (1%) of dynamic memory, leaving 6058 bytes for local variables. Maximum is 6144 bytes.

examples/smooth_control

Result: PASS

Sketch uses 5311 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 209 bytes (3%) of dynamic memory, leaving 5935 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/motor_control_10bit

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:26:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0b00000011;  // 10bit
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:26:3: note: suggested alternative: 'TCC1'
   TCCR1A = 0b00000011;  // 10bit
   ^~~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:27:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0b00001001;  // x1 fast pwm
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:27:3: note: suggested alternative: 'TCC1'
   TCCR1B = 0b00001001;  // x1 fast pwm
   ^~~~~~
   TCC1

examples/motor_control_31kHz

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:26:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 0b00000001;  // x1
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:26:3: note: suggested alternative: 'TCC2'
   TCCR2B = 0b00000001;  // x1
   ^~~~~~
   TCC2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:27:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = 0b00000001;  // phase correct
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:27:3: note: suggested alternative: 'TCC2'
   TCCR2A = 0b00000001;  // phase correct
   ^~~~~~
   TCC2

examples/motor_demo

Result: PASS

Sketch uses 16848 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3076 bytes (9%) of dynamic memory, leaving 29692 bytes for local variables. Maximum is 32768 bytes.

examples/multi_motor

Result: PASS

Sketch uses 16108 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3116 bytes (9%) of dynamic memory, leaving 29652 bytes for local variables. Maximum is 32768 bytes.

examples/multi_motor_tank

Result: PASS

Sketch uses 16108 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3116 bytes (9%) of dynamic memory, leaving 29652 bytes for local variables. Maximum is 32768 bytes.

examples/smooth_control

Result: PASS

Sketch uses 16428 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3076 bytes (9%) of dynamic memory, leaving 29692 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp: In member function 'void GMotor::setPins(bool, bool, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp:77:46: error: 'analogWrite' was not declared in this scope
     if (_pwmC != _GM_NC) analogWrite(_pwmC, c);
                                              ^

examples/motor_control_10bit

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:26:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0b00000011;  // 10bit
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_10bit/motor_control_10bit.ino:27:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0b00001001;  // x1 fast pwm
   ^

examples/motor_control_31kHz

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:26:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 0b00000001;  // x1
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/examples/motor_control_31kHz/motor_control_31kHz.ino:27:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = 0b00000001;  // phase correct
   ^

examples/motor_demo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp: In member function 'void GMotor::setPins(bool, bool, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp:77:46: error: 'analogWrite' was not declared in this scope
     if (_pwmC != _GM_NC) analogWrite(_pwmC, c);
                                              ^

examples/multi_motor

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp: In member function 'void GMotor::setPins(bool, bool, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp:77:46: error: 'analogWrite' was not declared in this scope
     if (_pwmC != _GM_NC) analogWrite(_pwmC, c);
                                              ^

examples/multi_motor_tank

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp: In member function 'void GMotor::setPins(bool, bool, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp:77:46: error: 'analogWrite' was not declared in this scope
     if (_pwmC != _GM_NC) analogWrite(_pwmC, c);
                                              ^

examples/smooth_control

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp: In member function 'void GMotor::setPins(bool, bool, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverMotor/src/GyverMotor.cpp:77:46: error: 'analogWrite' was not declared in this scope
     if (_pwmC != _GM_NC) analogWrite(_pwmC, c);
                                              ^