GyverPWM - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

GyverPWM

Version: 1.5
More details

Compatibility matrix

Board Claims compatibility Inclusion 
PWMdefFrequency
 
PWMfrequency
 
PWMresolution
 
PWMtest
 
squareTest
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		No FAIL FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		No FAIL FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 466 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/PWMdefFrequency

Result: PASS 

Sketch uses 1066 bytes (3%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/PWMfrequency

Result: PASS 

Sketch uses 1606 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 16 bytes (0%) of dynamic memory, leaving 2032 bytes for local variables. Maximum is 2048 bytes.

examples/PWMresolution

Result: PASS 

Sketch uses 1458 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 16 bytes (0%) of dynamic memory, leaving 2032 bytes for local variables. Maximum is 2048 bytes.

examples/PWMtest

Result: PASS 

Sketch uses 988 bytes (3%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/squareTest

Result: PASS 

Sketch uses 618 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /tmp/arduino-testlib25421468/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMdefFrequency

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMdefFrequency/PWMdefFrequency.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMfrequency

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMfrequency/PWMfrequency.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMresolution

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMresolution/PWMresolution.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMtest

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMtest/PWMtest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/squareTest

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/squareTest/squareTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib25421468/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMdefFrequency

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMdefFrequency/PWMdefFrequency.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMfrequency

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMfrequency/PWMfrequency.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMresolution

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMresolution/PWMresolution.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMtest

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMtest/PWMtest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/squareTest

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/squareTest/squareTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /tmp/arduino-testlib3940191814/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMdefFrequency

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMdefFrequency/PWMdefFrequency.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMfrequency

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMfrequency/PWMfrequency.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMresolution

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMresolution/PWMresolution.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/PWMtest

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMtest/PWMtest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

examples/squareTest

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/squareTest/squareTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"
  ^~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /tmp/arduino-testlib1209179535/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"  
  ^

examples/PWMdefFrequency

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMdefFrequency/PWMdefFrequency.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"  
  ^

examples/PWMfrequency

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMfrequency/PWMfrequency.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"  
  ^

examples/PWMresolution

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMresolution/PWMresolution.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"  
  ^

examples/PWMtest

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/PWMtest/PWMtest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"  
  ^

examples/squareTest

Result: FAIL 

WARNING: library GyverPWM claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/examples/squareTest/squareTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPWM/src/GyverPWM.h:28:2: error: #error "This MCU is not supported in GyverPWM.h library"
 #error "This MCU is not supported in GyverPWM.h library"  
  ^