GyverPower - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

GyverPower

Version: 2.1
More details

Compatibility matrix

Board Claims compatibility Inclusion 
WDT_calibration
 
powersaveMillis
 
simpleWakePeriodic
 
lowClockTimeCorrect
 
power_mode
 
sleepMillis
 
GyverPower_example
 
customSleepMillis
 
hardwareControl
 
interruptWakeSleep
 
lowClock
 
sleepDelayMillis
 
interruptWakeSleepDelay
 
sleeptime
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 474 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 10 bytes (0%) of dynamic memory, leaving 2038 bytes for local variables. Maximum is 2048 bytes.

examples/GyverPower_example

Result: PASS 

Sketch uses 2634 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 221 bytes (10%) of dynamic memory, leaving 1827 bytes for local variables. Maximum is 2048 bytes.

examples/WDT_calibration

Result: PASS 

Sketch uses 2346 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 197 bytes (9%) of dynamic memory, leaving 1851 bytes for local variables. Maximum is 2048 bytes.

examples/customSleepMillis

Result: PASS 

Sketch uses 1208 bytes (3%) of program storage space. Maximum is 32256 bytes.
Global variables use 34 bytes (1%) of dynamic memory, leaving 2014 bytes for local variables. Maximum is 2048 bytes.

examples/hardwareControl

Result: PASS 

Sketch uses 1732 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 189 bytes (9%) of dynamic memory, leaving 1859 bytes for local variables. Maximum is 2048 bytes.

examples/interruptWakeSleep

Result: PASS 

Sketch uses 2242 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 223 bytes (10%) of dynamic memory, leaving 1825 bytes for local variables. Maximum is 2048 bytes.

examples/interruptWakeSleepDelay

Result: PASS 

Sketch uses 2428 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 223 bytes (10%) of dynamic memory, leaving 1825 bytes for local variables. Maximum is 2048 bytes.

examples/lowClock

Result: PASS 

Sketch uses 1528 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 201 bytes (9%) of dynamic memory, leaving 1847 bytes for local variables. Maximum is 2048 bytes.

examples/lowClockTimeCorrect

Result: PASS 

Sketch uses 1026 bytes (3%) of program storage space. Maximum is 32256 bytes.
Global variables use 10 bytes (0%) of dynamic memory, leaving 2038 bytes for local variables. Maximum is 2048 bytes.

examples/power_mode

Result: PASS 

Sketch uses 1080 bytes (3%) of program storage space. Maximum is 32256 bytes.
Global variables use 22 bytes (1%) of dynamic memory, leaving 2026 bytes for local variables. Maximum is 2048 bytes.

examples/powersaveMillis

Result: PASS 

Sketch uses 2264 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 220 bytes (10%) of dynamic memory, leaving 1828 bytes for local variables. Maximum is 2048 bytes.

examples/simpleWakePeriodic

Result: PASS 

Sketch uses 856 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 22 bytes (1%) of dynamic memory, leaving 2026 bytes for local variables. Maximum is 2048 bytes.

examples/sleepDelayMillis

Result: PASS 

Sketch uses 2172 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 209 bytes (10%) of dynamic memory, leaving 1839 bytes for local variables. Maximum is 2048 bytes.

examples/sleepMillis

Result: PASS 

Sketch uses 1958 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 209 bytes (10%) of dynamic memory, leaving 1839 bytes for local variables. Maximum is 2048 bytes.

examples/sleeptime

Result: PASS 

Sketch uses 2650 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 209 bytes (10%) of dynamic memory, leaving 1839 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

In file included from /tmp/arduino-testlib1926700922/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/GyverPower_example

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/GyverPower_example/GyverPower_example.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/WDT_calibration

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/WDT_calibration/WDT_calibration.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/customSleepMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/customSleepMillis/customSleepMillis.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/hardwareControl

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/hardwareControl/hardwareControl.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/interruptWakeSleep

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/interruptWakeSleep/interruptWakeSleep.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/interruptWakeSleepDelay

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/interruptWakeSleepDelay/interruptWakeSleepDelay.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/lowClock

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClock/lowClock.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/lowClockTimeCorrect

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/power_mode

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/power_mode/power_mode.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/powersaveMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/simpleWakePeriodic

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/simpleWakePeriodic/simpleWakePeriodic.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/sleepDelayMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleepDelayMillis/sleepDelayMillis.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/sleepMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleepMillis/sleepMillis.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/sleeptime

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleeptime/sleeptime.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /tmp/arduino-testlib1926700922/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/GyverPower_example

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/GyverPower_example/GyverPower_example.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/WDT_calibration

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/WDT_calibration/WDT_calibration.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/customSleepMillis

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/customSleepMillis/customSleepMillis.ino:5:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/hardwareControl

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/hardwareControl/hardwareControl.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/interruptWakeSleep

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/interruptWakeSleep/interruptWakeSleep.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/interruptWakeSleepDelay

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/interruptWakeSleepDelay/interruptWakeSleepDelay.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/lowClock

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClock/lowClock.ino:5:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/lowClockTimeCorrect

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino:4:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino:10:32: error: 'CLKPR' was not declared in this scope
 #define delay(x) delay((x) >> (CLKPR & 0xf))
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino:24:3: note: in expansion of macro 'delay'
   delay(1000);    // держит 1 секунду, несмотря на пониженный клок!
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino:10:32: note: suggested alternative: 'CLKCTRL'
 #define delay(x) delay((x) >> (CLKPR & 0xf))
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino:24:3: note: in expansion of macro 'delay'
   delay(1000);    // держит 1 секунду, несмотря на пониженный клок!
   ^~~~~

examples/power_mode

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/power_mode/power_mode.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/powersaveMillis

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h: In function 'void uptime2Init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:20:3: error: 'TCCR2A' was not declared in this scope
   TCCR2A = (1 << WGM20) | (1 << WGM21);
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:20:3: note: suggested alternative: 'TCB2'
   TCCR2A = (1 << WGM20) | (1 << WGM21);
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:20:18: error: 'WGM20' was not declared in this scope
   TCCR2A = (1 << WGM20) | (1 << WGM21);
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:20:33: error: 'WGM21' was not declared in this scope
   TCCR2A = (1 << WGM20) | (1 << WGM21);
                                 ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:21:3: error: 'TCCR2B' was not declared in this scope
   TCCR2B = 1 << CS22;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:21:3: note: suggested alternative: 'TCB2'
   TCCR2B = 1 << CS22;
   ^~~~~~
   TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:21:17: error: 'CS22' was not declared in this scope
   TCCR2B = 1 << CS22;
                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:22:3: error: 'TIMSK2' was not declared in this scope
   TIMSK2 = 1 << TOIE2;
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:22:3: note: suggested alternative: 'TIMERB2'
   TIMSK2 = 1 << TOIE2;
   ^~~~~~
   TIMERB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:22:17: error: 'TOIE2' was not declared in this scope
   TIMSK2 = 1 << TOIE2;
                 ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h: In function 'long unsigned int micros2()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:47:15: error: 'TCNT2' was not declared in this scope
   uint8_t t = TCNT2;                        // считать содержимое счетного регистра
               ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:47:15: note: suggested alternative: 'TCB2'
   uint8_t t = TCNT2;                        // считать содержимое счетного регистра
               ^~~~~
               TCB2
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:48:8: error: 'TIFR2' was not declared in this scope
   if ((TIFR2 & _BV(TOV2)) && (t < 255))     // инкремент по переполнению
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:48:8: note: suggested alternative: 'TIMERB2'
   if ((TIFR2 & _BV(TOV2)) && (t < 255))     // инкремент по переполнению
        ^~~~~
        TIMERB2
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-14928D72B3E5AE90017AA995BE6C802E/sketch/powersaveMillis.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:48:20: error: 'TOV2' was not declared in this scope
   if ((TIFR2 & _BV(TOV2)) && (t < 255))     // инкремент по переполнению
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/uptime2.h:48:20: note: suggested alternative: 'TCB2'
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino:6:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h: At global scope:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino:11:22: error: 'EXTSTANDBY_SLEEP' was not declared in this scope
   power.setSleepMode(EXTSTANDBY_SLEEP);
                      ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino:11:22: note: suggested alternative: 'STANDBY_SLEEP'
   power.setSleepMode(EXTSTANDBY_SLEEP);
                      ^~~~~~~~~~~~~~~~
                      STANDBY_SLEEP

examples/simpleWakePeriodic

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/simpleWakePeriodic/simpleWakePeriodic.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/sleepDelayMillis

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleepDelayMillis/sleepDelayMillis.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/sleepMillis

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleepMillis/sleepMillis.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

examples/sleeptime

Result: FAIL 

WARNING: library GyverPower claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:51:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleeptime/sleeptime.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: error: 'SLEEP_MODE_ADC' was not declared in this scope
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/powerConstants.h:35:17: note: suggested alternative: 'SLEEP_MODE_IDLE'
     ADC_SLEEP = SLEEP_MODE_ADC,
                 ^~~~~~~~~~~~~~
                 SLEEP_MODE_IDLE

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

In file included from /tmp/arduino-testlib1191946676/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/GyverPower_example

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/GyverPower_example/GyverPower_example.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/WDT_calibration

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/WDT_calibration/WDT_calibration.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/customSleepMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/customSleepMillis/customSleepMillis.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/hardwareControl

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/hardwareControl/hardwareControl.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/interruptWakeSleep

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/interruptWakeSleep/interruptWakeSleep.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/interruptWakeSleepDelay

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/interruptWakeSleepDelay/interruptWakeSleepDelay.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/lowClock

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClock/lowClock.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/lowClockTimeCorrect

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/power_mode

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/power_mode/power_mode.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/powersaveMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/simpleWakePeriodic

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/simpleWakePeriodic/simpleWakePeriodic.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/sleepDelayMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleepDelayMillis/sleepDelayMillis.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/sleepMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleepMillis/sleepMillis.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

examples/sleeptime

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleeptime/sleeptime.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

In file included from /tmp/arduino-testlib3196499301/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/GyverPower_example

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/GyverPower_example/GyverPower_example.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/WDT_calibration

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/WDT_calibration/WDT_calibration.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/customSleepMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/customSleepMillis/customSleepMillis.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/hardwareControl

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/hardwareControl/hardwareControl.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/interruptWakeSleep

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/interruptWakeSleep/interruptWakeSleep.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/interruptWakeSleepDelay

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/interruptWakeSleepDelay/interruptWakeSleepDelay.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/lowClock

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClock/lowClock.ino:5:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/lowClockTimeCorrect

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/lowClockTimeCorrect/lowClockTimeCorrect.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/power_mode

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/power_mode/power_mode.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/powersaveMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/powersaveMillis/powersaveMillis.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/simpleWakePeriodic

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/simpleWakePeriodic/simpleWakePeriodic.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/sleepDelayMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleepDelayMillis/sleepDelayMillis.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/sleepMillis

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleepMillis/sleepMillis.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.

examples/sleeptime

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/examples/sleeptime/sleeptime.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverPower/src/GyverPower.h:49:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.