GyverUART - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

GyverUART

Version: 1.10
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	printTest	parseTest
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 636 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 109 bytes (5%) of dynamic memory, leaving 1939 bytes for local variables. Maximum is 2048 bytes.

examples/parseTest

Result: PASS

Sketch uses 1560 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 131 bytes (6%) of dynamic memory, leaving 1917 bytes for local variables. Maximum is 2048 bytes.

examples/printTest

Result: PASS

Sketch uses 4350 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 165 bytes (8%) of dynamic memory, leaving 1883 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib1452384477/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

examples/parseTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/examples/parseTest/parseTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

examples/printTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/examples/printTest/printTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library GyverUART claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:25:5: error: 'UBRR0H' was not declared in this scope
     UBRR0H = highByte(speed);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:26:5: error: 'UBRR0L' was not declared in this scope
     UBRR0L = lowByte(speed);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:27:5: error: 'UCSR0A' was not declared in this scope
     UCSR0A = (1 << U2X0);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:27:20: error: 'U2X0' was not declared in this scope
     UCSR0A = (1 << U2X0);
                    ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:5: error: 'UCSR0B' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:19: error: 'TXEN0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:32: error: 'RXEN0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                                ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:45: error: 'RXCIE0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                                             ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:5: error: 'UCSR0C' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:19: error: 'UCSZ01' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
                   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:33: error: 'UCSZ00' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
                                 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:35:5: error: 'UCSR0B' was not declared in this scope
     UCSR0B = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In function 'void USART_RX_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:9: error: 'UCSR0A' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:22: error: 'UPE0' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:22: note: suggested alternative: 'SPI0'
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                      ^~~~
                      SPI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:33: error: 'UDR0' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:33: note: suggested alternative: 'DDRD'
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                                 ^~~~
                                 DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:43:13: error: 'UDR0' was not declared in this scope
         c = UDR0;
             ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:43:13: note: suggested alternative: 'DDRD'
         c = UDR0;
             ^~~~
             DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::writeBuffer(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:224:9: error: 'UCSR0B' was not declared in this scope
         UCSR0B |= (1<<UDRIE0);
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:224:23: error: 'UDRIE0' was not declared in this scope
         UCSR0B |= (1<<UDRIE0);
                       ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In function 'void USART_UDRE_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:229:5: error: 'UDR0' was not declared in this scope
     UDR0 = _UART_TX_BUFFER[_UART_TX_BUFFER_TAIL];
     ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:229:5: note: suggested alternative: 'DDRD'
     UDR0 = _UART_TX_BUFFER[_UART_TX_BUFFER_TAIL];
     ^~~~
     DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:231:56: error: 'UCSR0B' was not declared in this scope
     if (_UART_TX_BUFFER_HEAD == _UART_TX_BUFFER_TAIL) {UCSR0B &=~ (1<<UDRIE0);}
                                                        ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:231:71: error: 'UDRIE0' was not declared in this scope
     if (_UART_TX_BUFFER_HEAD == _UART_TX_BUFFER_TAIL) {UCSR0B &=~ (1<<UDRIE0);}
                                                                       ^~~~~~

examples/parseTest

Result: FAIL

WARNING: library GyverUART claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:25:5: error: 'UBRR0H' was not declared in this scope
     UBRR0H = highByte(speed);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:26:5: error: 'UBRR0L' was not declared in this scope
     UBRR0L = lowByte(speed);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:27:5: error: 'UCSR0A' was not declared in this scope
     UCSR0A = (1 << U2X0);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:27:20: error: 'U2X0' was not declared in this scope
     UCSR0A = (1 << U2X0);
                    ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:5: error: 'UCSR0B' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:19: error: 'TXEN0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:32: error: 'RXEN0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                                ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:45: error: 'RXCIE0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                                             ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:5: error: 'UCSR0C' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:19: error: 'UCSZ01' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
                   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:33: error: 'UCSZ00' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
                                 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:35:5: error: 'UCSR0B' was not declared in this scope
     UCSR0B = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In function 'void USART_RX_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:9: error: 'UCSR0A' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:22: error: 'UPE0' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:22: note: suggested alternative: 'SPI0'
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                      ^~~~
                      SPI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:33: error: 'UDR0' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:33: note: suggested alternative: 'DDRD'
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                                 ^~~~
                                 DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:43:13: error: 'UDR0' was not declared in this scope
         c = UDR0;
             ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:43:13: note: suggested alternative: 'DDRD'
         c = UDR0;
             ^~~~
             DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::writeBuffer(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:224:9: error: 'UCSR0B' was not declared in this scope
         UCSR0B |= (1<<UDRIE0);
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:224:23: error: 'UDRIE0' was not declared in this scope
         UCSR0B |= (1<<UDRIE0);
                       ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In function 'void USART_UDRE_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:229:5: error: 'UDR0' was not declared in this scope
     UDR0 = _UART_TX_BUFFER[_UART_TX_BUFFER_TAIL];
     ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:229:5: note: suggested alternative: 'DDRD'
     UDR0 = _UART_TX_BUFFER[_UART_TX_BUFFER_TAIL];
     ^~~~
     DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:231:56: error: 'UCSR0B' was not declared in this scope
     if (_UART_TX_BUFFER_HEAD == _UART_TX_BUFFER_TAIL) {UCSR0B &=~ (1<<UDRIE0);}
                                                        ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:231:71: error: 'UDRIE0' was not declared in this scope
     if (_UART_TX_BUFFER_HEAD == _UART_TX_BUFFER_TAIL) {UCSR0B &=~ (1<<UDRIE0);}
                                                                       ^~~~~~

examples/printTest

Result: FAIL

WARNING: library GyverUART claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::begin(uint32_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:25:5: error: 'UBRR0H' was not declared in this scope
     UBRR0H = highByte(speed);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:26:5: error: 'UBRR0L' was not declared in this scope
     UBRR0L = lowByte(speed);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:27:5: error: 'UCSR0A' was not declared in this scope
     UCSR0A = (1 << U2X0);
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:27:20: error: 'U2X0' was not declared in this scope
     UCSR0A = (1 << U2X0);
                    ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:5: error: 'UCSR0B' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:19: error: 'TXEN0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:32: error: 'RXEN0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                                ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:28:45: error: 'RXCIE0' was not declared in this scope
     UCSR0B = ((1<<TXEN0) | (1<<RXEN0) | (1<<RXCIE0));
                                             ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:5: error: 'UCSR0C' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:19: error: 'UCSZ01' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
                   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:29:33: error: 'UCSZ00' was not declared in this scope
     UCSR0C = ((1<<UCSZ01) | (1<<UCSZ00));
                                 ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::end()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:35:5: error: 'UCSR0B' was not declared in this scope
     UCSR0B = 0;
     ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In function 'void USART_RX_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:9: error: 'UCSR0A' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:22: error: 'UPE0' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:22: note: suggested alternative: 'SPI0'
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                      ^~~~
                      SPI0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:33: error: 'UDR0' was not declared in this scope
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:41:33: note: suggested alternative: 'DDRD'
     if (UCSR0A & (1<<UPE0)){c = UDR0;} // Не сохранять новые данные если parity error
                                 ^~~~
                                 DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:43:13: error: 'UDR0' was not declared in this scope
         c = UDR0;
             ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:43:13: note: suggested alternative: 'DDRD'
         c = UDR0;
             ^~~~
             DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In member function 'void GyverUart::writeBuffer(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:224:9: error: 'UCSR0B' was not declared in this scope
         UCSR0B |= (1<<UDRIE0);
         ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:224:23: error: 'UDRIE0' was not declared in this scope
         UCSR0B |= (1<<UDRIE0);
                       ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp: In function 'void USART_UDRE_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:229:5: error: 'UDR0' was not declared in this scope
     UDR0 = _UART_TX_BUFFER[_UART_TX_BUFFER_TAIL];
     ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:229:5: note: suggested alternative: 'DDRD'
     UDR0 = _UART_TX_BUFFER[_UART_TX_BUFFER_TAIL];
     ^~~~
     DDRD
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:231:56: error: 'UCSR0B' was not declared in this scope
     if (_UART_TX_BUFFER_HEAD == _UART_TX_BUFFER_TAIL) {UCSR0B &=~ (1<<UDRIE0);}
                                                        ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.cpp:231:71: error: 'UDRIE0' was not declared in this scope
     if (_UART_TX_BUFFER_HEAD == _UART_TX_BUFFER_TAIL) {UCSR0B &=~ (1<<UDRIE0);}
                                                                       ^~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib2705995417/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

examples/parseTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/examples/parseTest/parseTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

examples/printTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/examples/printTest/printTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:10: fatal error: avr/io.h: No such file or directory
 #include <avr/io.h>
          ^~~~~~~~~~
compilation terminated.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

In file included from /tmp/arduino-testlib3960569048/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:20: fatal error: avr/io.h: No such file or directory
compilation terminated.

examples/parseTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/examples/parseTest/parseTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:20: fatal error: avr/io.h: No such file or directory
compilation terminated.

examples/printTest

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/examples/printTest/printTest.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverUART/src/GyverUART.h:30:20: fatal error: avr/io.h: No such file or directory
compilation terminated.