GyverWDT - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

GyverWDT

Version: 2.2
More details

Compatibility matrix

Board Claims compatibility Inclusion 
watchdog_alarm_mode
 
watchdog_double_reset
 
watchdog_interrupt_mode
 
watchdog_reset_mode
 
watchdog_reset_with_alert
 
watchdog_support_test
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/watchdog_alarm_mode

Result: PASS 

Sketch uses 850 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/watchdog_double_reset

Result: PASS 

Sketch uses 1700 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/watchdog_interrupt_mode

Result: PASS 

Sketch uses 2060 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 208 bytes (10%) of dynamic memory, leaving 1840 bytes for local variables. Maximum is 2048 bytes.

examples/watchdog_reset_mode

Result: PASS 

Sketch uses 944 bytes (2%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/watchdog_reset_with_alert

Result: PASS 

Sketch uses 1706 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 230 bytes (11%) of dynamic memory, leaving 1818 bytes for local variables. Maximum is 2048 bytes.

examples/watchdog_support_test

Result: PASS 

Sketch uses 1988 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 238 bytes (11%) of dynamic memory, leaving 1810 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /tmp/arduino-testlib4231035510/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_alarm_mode

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_alarm_mode/watchdog_alarm_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_alarm_mode/watchdog_alarm_mode.ino:2:10: fatal error: avr/sleep.h: No such file or directory
 #include <avr/sleep.h>
          ^~~~~~~~~~~~~
compilation terminated.

examples/watchdog_double_reset

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_double_reset/watchdog_double_reset.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_interrupt_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_interrupt_mode/watchdog_interrupt_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_reset_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_reset_mode/watchdog_reset_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_reset_with_alert

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_reset_with_alert/watchdog_reset_with_alert.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_support_test

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_support_test/watchdog_support_test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib4231035510/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_alarm_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_alarm_mode/watchdog_alarm_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_double_reset

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_double_reset/watchdog_double_reset.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_interrupt_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_interrupt_mode/watchdog_interrupt_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_reset_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_reset_mode/watchdog_reset_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_reset_with_alert

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_reset_with_alert/watchdog_reset_with_alert.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_support_test

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_support_test/watchdog_support_test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /private/tmp/arduino-testlib533434484/test/test.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_alarm_mode

Result: FAIL 

In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_alarm_mode/watchdog_alarm_mode.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_alarm_mode/watchdog_alarm_mode.ino:2:10: fatal error: avr/sleep.h: No such file or directory
 #include <avr/sleep.h>
          ^~~~~~~~~~~~~
compilation terminated.

examples/watchdog_double_reset

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_double_reset/watchdog_double_reset.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_interrupt_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_interrupt_mode/watchdog_interrupt_mode.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_reset_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_reset_mode/watchdog_reset_mode.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_reset_with_alert

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_reset_with_alert/watchdog_reset_with_alert.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

examples/watchdog_support_test

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_support_test/watchdog_support_test.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"
  ^~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /tmp/arduino-testlib3853769644/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"  
  ^

examples/watchdog_alarm_mode

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_alarm_mode/watchdog_alarm_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"  
  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_alarm_mode/watchdog_alarm_mode.ino:2:23: fatal error: avr/sleep.h: No such file or directory
compilation terminated.

examples/watchdog_double_reset

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_double_reset/watchdog_double_reset.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"  
  ^

examples/watchdog_interrupt_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_interrupt_mode/watchdog_interrupt_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"  
  ^

examples/watchdog_reset_mode

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_reset_mode/watchdog_reset_mode.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"  
  ^

examples/watchdog_reset_with_alert

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_reset_with_alert/watchdog_reset_with_alert.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"  
  ^

examples/watchdog_support_test

Result: FAIL 

WARNING: library GyverWDT claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/examples/watchdog_support_test/watchdog_support_test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/GyverWDT/src/GyverWDT.h:106:2: error: #error "This MCU is not supported in GyverWDT.h library"
 #error "This MCU is not supported in GyverWDT.h library"  
  ^