This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.3.0
More details
| Board | Claims compatibility | Inclusion | Blink |
Coop |
GetInfo |
ListTasks |
Mem |
Timer |
WaitNotify |
|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Sketch uses 2244 bytes (6%) of program storage space. Maximum is 32256 bytes. Global variables use 16405 bytes (801%) of dynamic memory, leaving -14357 bytes for local variables. Maximum is 2048 bytes. Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 3070 bytes (9%) of program storage space. Maximum is 32256 bytes. Global variables use 16592 bytes (810%) of dynamic memory, leaving -14544 bytes for local variables. Maximum is 2048 bytes. Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 5436 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 16698 bytes (815%) of dynamic memory, leaving -14650 bytes for local variables. Maximum is 2048 bytes. Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 4794 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 16630 bytes (812%) of dynamic memory, leaving -14582 bytes for local variables. Maximum is 2048 bytes. Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 5342 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 16702 bytes (815%) of dynamic memory, leaving -14654 bytes for local variables. Maximum is 2048 bytes. Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 4092 bytes (12%) of program storage space. Maximum is 32256 bytes. Global variables use 16634 bytes (812%) of dynamic memory, leaving -14586 bytes for local variables. Maximum is 2048 bytes. Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 4668 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 16608 bytes (810%) of dynamic memory, leaving -14560 bytes for local variables. Maximum is 2048 bytes. Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /tmp/arduino-testlib175998885/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^~~~
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Blink/Blink.ino:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/task.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/task.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~In fIn file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Coop/Coop.ino:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~In fIn file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/timer.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/timer.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/GetInfo/GetInfo.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/sched.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/sched.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~In fIn file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/timer.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/timer.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/ListTasks/ListTasks.ino:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~In fIn file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/sched.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/sched.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Mem/Mem.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~In fIn file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/timer.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/timer.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Timer/Timer.ino:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
InIn file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/task.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/task.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/WaitNotify/WaitNotify.ino:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/task.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/task.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~In fIn file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:99,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:76:9: error: unknown type name 'bool'
typedef bool boolean;
^
Result: PASS
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /tmp/arduino-testlib175998885/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
��
Result: FAIL
Sketch uses 2440 bytes (4%) of program storage space. Maximum is 49152 bytes.
Global variables use 16412 bytes (267%) of dynamic memory, leaving -10268 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Blink/Blink.ino:30:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
����In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 4286 bytes (8%) of program storage space. Maximum is 49152 bytes.
Global variables use 16567 bytes (269%) of dynamic memory, leaving -10423 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Coop/Coop.ino:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/sched.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/sched.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 6619 bytes (13%) of program storage space. Maximum is 49152 bytes.
Global variables use 16577 bytes (269%) of dynamic memory, leaving -10433 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/GetInfo/GetInfo.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
InNot enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 5985 bytes (12%) of program storage space. Maximum is 49152 bytes.
Global variables use 16577 bytes (269%) of dynamic memory, leaving -10433 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/ListTasks/ListTasks.ino:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
��Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 6537 bytes (13%) of program storage space. Maximum is 49152 bytes.
Global variables use 16577 bytes (269%) of dynamic memory, leaving -10433 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Mem/Mem.ino:28:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 5300 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 16577 bytes (269%) of dynamic memory, leaving -10433 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Timer/Timer.ino:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/queue.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/task.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/task.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/timer.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/timer.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: FAIL
Sketch uses 5871 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 16577 bytes (269%) of dynamic memory, leaving -10433 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:32:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/WaitNotify/WaitNotify.ino:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:129: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/mem.c:27:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/defines.h:98:9: note: #pragma message: WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.
#pragma message("WARNING: This embedded platform and/or tool-chain is not currently supported by HeliOS - proceed with caution.")
^~~~~~~
����Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.
Result: PASS
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13268 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 19388 bytes (59%) of dynamic memory, leaving 13380 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13380 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 19388 bytes (59%) of dynamic memory, leaving 13380 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14624 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 19388 bytes (59%) of dynamic memory, leaving 13380 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14088 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 19388 bytes (59%) of dynamic memory, leaving 13380 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14512 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 19388 bytes (59%) of dynamic memory, leaving 13380 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 13696 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 19388 bytes (59%) of dynamic memory, leaving 13380 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14124 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 19388 bytes (59%) of dynamic memory, leaving 13380 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
In file included from /tmp/arduino-testlib175998885/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:569:33: error: macro "xQueueCreate" requires 2 arguments, but only 1 given
xQueue xQueueCreate(xBase limit_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:678:39: error: macro "xQueuePeek" requires 3 arguments, but only 1 given
xQueueMessage xQueuePeek(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:705:42: error: macro "xQueueReceive" requires 3 arguments, but only 1 given
xQueueMessage xQueueReceive(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:974:93: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
Base_t xTaskNotifyGive(xTask task_, xBase notificationBytes_, const char *notificationValue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1123:32: error: macro "xTimerDelete" requires 2 arguments, but only 1 given
void xTimerDelete(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1137:58: error: macro "xTimerChangePeriod" requires 3 arguments, but only 2 given
void xTimerChangePeriod(xTimer timer_, xTime timerPeriod_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1185:31: error: macro "xTimerReset" requires 2 arguments, but only 1 given
void xTimerReset(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1198:31: error: macro "xTimerStart" requires 2 arguments, but only 1 given
void xTimerStart(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1209:30: error: macro "xTimerStop" requires 2 arguments, but only 1 given
void xTimerStop(xTimer timer_);
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Blink/Blink.ino:30:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:569:33: error: macro "xQueueCreate" requires 2 arguments, but only 1 given
xQueue xQueueCreate(xBase limit_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:678:39: error: macro "xQueuePeek" requires 3 arguments, but only 1 given
xQueueMessage xQueuePeek(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:705:42: error: macro "xQueueReceive" requires 3 arguments, but only 1 given
xQueueMessage xQueueReceive(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:974:93: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
Base_t xTaskNotifyGive(xTask task_, xBase notificationBytes_, const char *notificationValue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1123:32: error: macro "xTimerDelete" requires 2 arguments, but only 1 given
void xTimerDelete(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1137:58: error: macro "xTimerChangePeriod" requires 3 arguments, but only 2 given
void xTimerChangePeriod(xTimer timer_, xTime timerPeriod_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1185:31: error: macro "xTimerReset" requires 2 arguments, but only 1 given
void xTimerReset(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1198:31: error: macro "xTimerStart" requires 2 arguments, but only 1 given
void xTimerStart(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1209:30: error: macro "xTimerStop" requires 2 arguments, but only 1 given
void xTimerStop(xTimer timer_);
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Coop/Coop.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:569:33: error: macro "xQueueCreate" requires 2 arguments, but only 1 given
xQueue xQueueCreate(xBase limit_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:678:39: error: macro "xQueuePeek" requires 3 arguments, but only 1 given
xQueueMessage xQueuePeek(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:705:42: error: macro "xQueueReceive" requires 3 arguments, but only 1 given
xQueueMessage xQueueReceive(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:974:93: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
Base_t xTaskNotifyGive(xTask task_, xBase notificationBytes_, const char *notificationValue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1123:32: error: macro "xTimerDelete" requires 2 arguments, but only 1 given
void xTimerDelete(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1137:58: error: macro "xTimerChangePeriod" requires 3 arguments, but only 2 given
void xTimerChangePeriod(xTimer timer_, xTime timerPeriod_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1185:31: error: macro "xTimerReset" requires 2 arguments, but only 1 given
void xTimerReset(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1198:31: error: macro "xTimerStart" requires 2 arguments, but only 1 given
void xTimerStart(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1209:30: error: macro "xTimerStop" requires 2 arguments, but only 1 given
void xTimerStop(xTimer timer_);
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/GetInfo/GetInfo.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:569:33: error: macro "xQueueCreate" requires 2 arguments, but only 1 given
xQueue xQueueCreate(xBase limit_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:678:39: error: macro "xQueuePeek" requires 3 arguments, but only 1 given
xQueueMessage xQueuePeek(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:705:42: error: macro "xQueueReceive" requires 3 arguments, but only 1 given
xQueueMessage xQueueReceive(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:974:93: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
Base_t xTaskNotifyGive(xTask task_, xBase notificationBytes_, const char *notificationValue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1123:32: error: macro "xTimerDelete" requires 2 arguments, but only 1 given
void xTimerDelete(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1137:58: error: macro "xTimerChangePeriod" requires 3 arguments, but only 2 given
void xTimerChangePeriod(xTimer timer_, xTime timerPeriod_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1185:31: error: macro "xTimerReset" requires 2 arguments, but only 1 given
void xTimerReset(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1198:31: error: macro "xTimerStart" requires 2 arguments, but only 1 given
void xTimerStart(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1209:30: error: macro "xTimerStop" requires 2 arguments, but only 1 given
void xTimerStop(xTimer timer_);
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/ListTasks/ListTasks.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:569:33: error: macro "xQueueCreate" requires 2 arguments, but only 1 given
xQueue xQueueCreate(xBase limit_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:678:39: error: macro "xQueuePeek" requires 3 arguments, but only 1 given
xQueueMessage xQueuePeek(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:705:42: error: macro "xQueueReceive" requires 3 arguments, but only 1 given
xQueueMessage xQueueReceive(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:974:93: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
Base_t xTaskNotifyGive(xTask task_, xBase notificationBytes_, const char *notificationValue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1123:32: error: macro "xTimerDelete" requires 2 arguments, but only 1 given
void xTimerDelete(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1137:58: error: macro "xTimerChangePeriod" requires 3 arguments, but only 2 given
void xTimerChangePeriod(xTimer timer_, xTime timerPeriod_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1185:31: error: macro "xTimerReset" requires 2 arguments, but only 1 given
void xTimerReset(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1198:31: error: macro "xTimerStart" requires 2 arguments, but only 1 given
void xTimerStart(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1209:30: error: macro "xTimerStop" requires 2 arguments, but only 1 given
void xTimerStop(xTimer timer_);
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Mem/Mem.ino:28:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:569:33: error: macro "xQueueCreate" requires 2 arguments, but only 1 given
xQueue xQueueCreate(xBase limit_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:678:39: error: macro "xQueuePeek" requires 3 arguments, but only 1 given
xQueueMessage xQueuePeek(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:705:42: error: macro "xQueueReceive" requires 3 arguments, but only 1 given
xQueueMessage xQueueReceive(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:974:93: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
Base_t xTaskNotifyGive(xTask task_, xBase notificationBytes_, const char *notificationValue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1123:32: error: macro "xTimerDelete" requires 2 arguments, but only 1 given
void xTimerDelete(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1137:58: error: macro "xTimerChangePeriod" requires 3 arguments, but only 2 given
void xTimerChangePeriod(xTimer timer_, xTime timerPeriod_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1185:31: error: macro "xTimerReset" requires 2 arguments, but only 1 given
void xTimerReset(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1198:31: error: macro "xTimerStart" requires 2 arguments, but only 1 given
void xTimerStart(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1209:30: error: macro "xTimerStop" requires 2 arguments, but only 1 given
void xTimerStop(xTimer timer_);
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/Timer/Timer.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:569:33: error: macro "xQueueCreate" requires 2 arguments, but only 1 given
xQueue xQueueCreate(xBase limit_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:678:39: error: macro "xQueuePeek" requires 3 arguments, but only 1 given
xQueueMessage xQueuePeek(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:705:42: error: macro "xQueueReceive" requires 3 arguments, but only 1 given
xQueueMessage xQueueReceive(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:974:93: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
Base_t xTaskNotifyGive(xTask task_, xBase notificationBytes_, const char *notificationValue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1123:32: error: macro "xTimerDelete" requires 2 arguments, but only 1 given
void xTimerDelete(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1137:58: error: macro "xTimerChangePeriod" requires 3 arguments, but only 2 given
void xTimerChangePeriod(xTimer timer_, xTime timerPeriod_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1185:31: error: macro "xTimerReset" requires 2 arguments, but only 1 given
void xTimerReset(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1198:31: error: macro "xTimerStart" requires 2 arguments, but only 1 given
void xTimerStart(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1209:30: error: macro "xTimerStop" requires 2 arguments, but only 1 given
void xTimerStop(xTimer timer_);
^
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/WaitNotify/WaitNotify.ino:27:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:569:33: error: macro "xQueueCreate" requires 2 arguments, but only 1 given
xQueue xQueueCreate(xBase limit_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:678:39: error: macro "xQueuePeek" requires 3 arguments, but only 1 given
xQueueMessage xQueuePeek(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:705:42: error: macro "xQueueReceive" requires 3 arguments, but only 1 given
xQueueMessage xQueueReceive(xQueue queue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:974:93: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
Base_t xTaskNotifyGive(xTask task_, xBase notificationBytes_, const char *notificationValue_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1123:32: error: macro "xTimerDelete" requires 2 arguments, but only 1 given
void xTimerDelete(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1137:58: error: macro "xTimerChangePeriod" requires 3 arguments, but only 2 given
void xTimerChangePeriod(xTimer timer_, xTime timerPeriod_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1185:31: error: macro "xTimerReset" requires 2 arguments, but only 1 given
void xTimerReset(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1198:31: error: macro "xTimerStart" requires 2 arguments, but only 1 given
void xTimerStart(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/src/HeliOS.h:1209:30: error: macro "xTimerStop" requires 2 arguments, but only 1 given
void xTimerStop(xTimer timer_);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HeliOS/examples/WaitNotify/WaitNotify.ino:43:41: error: macro "xTaskNotifyGive" passed 3 arguments, but takes just 1
xTaskNotifyGive(receiver, 5, "HELLO");
^