Heltec ESP32 Dev-Boards - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Heltec ESP32 Dev-Boards

Version: 1.1.0
More details

Compatibility matrix

Board Claims compatibility Inclusion 
Low_Power
 
OLED
 
SD
 
Sensor
 
TimeNTP_ESP32WiFi
 
ESP32
 
Factory_Test
 
LoRa
arduino:avr:uno
1.8.4 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL PASS FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL 

WARNING: library Heltec_ESP8266_Dev-Boards claims to run on esp8266 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /tmp/arduino-testlib3357527231/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards/src/heltec.h:30:2: error: #error "This library only supports boards with ESP8266 processor."
 #error "This library only supports boards with ESP8266 processor."
  ^~~~~
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards

examples/ESP32

Result: FAIL 


					
					
examples/Factory_Test

					

						Result: FAIL
					

					

					
					
examples/LoRa

					

						Result: FAIL
					

					

					
					
examples/Low_Power

					

						Result: FAIL
					

					
WARNING: library Heltec_ESP32_Dev-Boards claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/Low_Power/Low_Power.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/src/heltec.h:43:2: error: #error "This library only supports boards with ESP32 processor."
 #error "This library only supports boards with ESP32 processor."
  ^~~~~
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards


					
					
examples/OLED

					

						Result: FAIL
					

					

					
					
examples/SD

					

						Result: FAIL
					

					

					
					
examples/Sensor

					

						Result: FAIL
					

					

					
					
examples/TimeNTP_ESP32WiFi

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:8: error: 'class WiFiClass' has no member named 'mode'
   WiFi.mode(WIFI_MODE_STA);
        ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:13: error: 'WIFI_MODE_STA' was not declared in this scope
   WiFi.mode(WIFI_MODE_STA);
             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:13: note: suggested alternative: 'AUTH_MODE_WPA'
   WiFi.mode(WIFI_MODE_STA);
             ^~~~~~~~~~~~~
             AUTH_MODE_WPA
Multiple libraries were found for "WiFi.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA


					
				
				
arduino:mbed_nano:nanorp2040connect @ 2.7.2

				
Inclusion

				

					Result: FAIL
					
				

				
WARNING: library Heltec_ESP8266_Dev-Boards claims to run on esp8266 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /tmp/arduino-testlib569258519/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards/src/heltec.h:30:2: error: #error "This library only supports boards with ESP8266 processor."
 #error "This library only supports boards with ESP8266 processor."
  ^~~~~
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards



					
					
examples/ESP32

					

						Result: FAIL
					

					

					
					
examples/Factory_Test

					

						Result: FAIL
					

					

					
					
examples/LoRa

					

						Result: FAIL
					

					

					
					
examples/Low_Power

					

						Result: FAIL
					

					
WARNING: library Heltec_ESP8266_Dev-Boards claims to run on esp8266 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/Low_Power/Low_Power.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards/src/heltec.h:30:2: error: #error "This library only supports boards with ESP8266 processor."
 #error "This library only supports boards with ESP8266 processor."
  ^~~~~
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards


					
					
examples/OLED

					

						Result: FAIL
					

					

					
					
examples/SD

					

						Result: FAIL
					

					

					
					
examples/Sensor

					

						Result: FAIL
					

					

					
					
examples/TimeNTP_ESP32WiFi

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:8: error: 'class WiFiClass' has no member named 'mode'
   WiFi.mode(WIFI_MODE_STA);
        ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:13: error: 'WIFI_MODE_STA' was not declared in this scope
   WiFi.mode(WIFI_MODE_STA);
             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:13: note: suggested alternative: 'AUTH_MODE_WPA'
   WiFi.mode(WIFI_MODE_STA);
             ^~~~~~~~~~~~~
             AUTH_MODE_WPA
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:39:24: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
   WiFi.begin(ssid, pass);
                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi/src/WiFi.h:79:9: note:   initializing argument 1 of 'int WiFiClass::begin(char*, const char*)'
     int begin(char* ssid, const char *passphrase);
         ^~~~~
Multiple libraries were found for "WiFi.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA


					
				
				
arduino:megaavr:nona4809 @ 1.8.7

				
Inclusion

				

					Result: FAIL
					
				

				
WARNING: library Heltec_ESP32_Dev-Boards claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib569258519/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/src/heltec.h:43:2: error: #error "This library only supports boards with ESP32 processor."
 #error "This library only supports boards with ESP32 processor."
  ^~~~~
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards



					
					
examples/ESP32

					

						Result: FAIL
					

					

					
					
examples/Factory_Test

					

						Result: FAIL
					

					

					
					
examples/LoRa

					

						Result: FAIL
					

					

					
					
examples/Low_Power

					

						Result: FAIL
					

					
WARNING: library Heltec_ESP32_Dev-Boards claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/Low_Power/Low_Power.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/src/heltec.h:43:2: error: #error "This library only supports boards with ESP32 processor."
 #error "This library only supports boards with ESP32 processor."
  ^~~~~
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards


					
					
examples/OLED

					

						Result: FAIL
					

					

					
					
examples/SD

					

						Result: FAIL
					

					

					
					
examples/Sensor

					

						Result: FAIL
					

					

					
					
examples/TimeNTP_ESP32WiFi

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:8: error: 'class WiFiClass' has no member named 'mode'
   WiFi.mode(WIFI_MODE_STA);
        ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:13: error: 'WIFI_MODE_STA' was not declared in this scope
   WiFi.mode(WIFI_MODE_STA);
             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:13: note: suggested alternative: 'AUTH_MODE_WPA'
   WiFi.mode(WIFI_MODE_STA);
             ^~~~~~~~~~~~~
             AUTH_MODE_WPA
Multiple libraries were found for "WiFi.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT


					
				
				
arduino:samd:mkrwifi1010 @ 1.8.12

				
Inclusion

				

					Result: FAIL
					
				

				
WARNING: library Heltec_ESP32_Dev-Boards claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /tmp/arduino-testlib3357527231/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/src/heltec.h:43:2: error: #error "This library only supports boards with ESP32 processor."
 #error "This library only supports boards with ESP32 processor."
  ^~~~~
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards



					
					
examples/ESP32

					

						Result: FAIL
					

					

					
					
examples/Factory_Test

					

						Result: FAIL
					

					

					
					
examples/LoRa

					

						Result: FAIL
					

					

					
					
examples/Low_Power

					

						Result: FAIL
					

					
WARNING: library Heltec_ESP32_Dev-Boards claims to run on esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/Low_Power/Low_Power.ino:23:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/src/heltec.h:43:2: error: #error "This library only supports boards with ESP32 processor."
 #error "This library only supports boards with ESP32 processor."
  ^~~~~
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards


					
					
examples/OLED

					

						Result: FAIL
					

					

					
					
examples/SD

					

						Result: FAIL
					

					

					
					
examples/Sensor

					

						Result: FAIL
					

					

					
					
examples/TimeNTP_ESP32WiFi

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:8: error: 'class WiFiClass' has no member named 'mode'
   WiFi.mode(WIFI_MODE_STA);
        ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:13: error: 'WIFI_MODE_STA' was not declared in this scope
   WiFi.mode(WIFI_MODE_STA);
             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:38:13: note: suggested alternative: 'AUTH_MODE_WPA'
   WiFi.mode(WIFI_MODE_STA);
             ^~~~~~~~~~~~~
             AUTH_MODE_WPA
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:39:24: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
   WiFi.begin(ssid, pass);
                        ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/TimeNTP_ESP32WiFi/TimeNTP_ESP32WiFi.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi/src/WiFi.h:79:9: note:   initializing argument 1 of 'int WiFiClass::begin(char*, const char*)'
     int begin(char* ssid, const char *passphrase);
         ^~~~~
Multiple libraries were found for "WiFi.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT


					
				
				
esp32:esp32:d1_mini32 @ 1.0.6

				
Inclusion

				

					Result: FAIL
					
				

				
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards



					
					
examples/ESP32

					

						Result: FAIL
					

					

					
					
examples/Factory_Test

					

						Result: FAIL
					

					

					
					
examples/LoRa

					

						Result: FAIL
					

					

					
					
examples/Low_Power

					

						Result: FAIL
					

					
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/Low_Power/Low_Power.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards/examples/Low_Power/Low_Power.ino:123:3: error: 'LoRa' was not declared in this scope
   LoRa.end();
   ^
Multiple libraries were found for "heltec.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP32_Dev-Boards
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Heltec_ESP8266_Dev-Boards


					
					
examples/OLED

					

						Result: FAIL
					

					

					
					
examples/SD

					

						Result: FAIL
					

					

					
					
examples/Sensor

					

						Result: FAIL
					

					

					
					
examples/TimeNTP_ESP32WiFi

					

						Result: PASS
					

					
Sketch uses 644422 bytes (49%) of program storage space. Maximum is 1310720 bytes.
Global variables use 38380 bytes (11%) of dynamic memory, leaving 289300 bytes for local variables. Maximum is 327680 bytes.