HiTechnic-Arduino - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

HiTechnic-Arduino

Compatibility matrix

Board	Claims compatibility	Inclusion	ControllerScanner	EmptyTemplate	OpenClosedLoopVelocityLogger
arduino:avr:uno 1.8.4	No ⚠️	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	FAIL	PASS	PASS
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	FAIL	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/ControllerScanner

Result: PASS

Sketch uses 6248 bytes (19%) of program storage space. Maximum is 32256 bytes.
Global variables use 733 bytes (35%) of dynamic memory, leaving 1315 bytes for local variables. Maximum is 2048 bytes.

examples/EmptyTemplate

Result: PASS

Sketch uses 2830 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 382 bytes (18%) of dynamic memory, leaving 1666 bytes for local variables. Maximum is 2048 bytes.

examples/OpenClosedLoopVelocityLogger

Result: PASS

Sketch uses 7210 bytes (22%) of program storage space. Maximum is 32256 bytes.
Global variables use 458 bytes (22%) of dynamic memory, leaving 1590 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/ControllerScanner

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino: In function 'void tryMotorController(DaisyChainPosition)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:88:34: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
     controller.getSensorType(type);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.h:34:14: note:   initializing argument 1 of 'void HiTechnicController::getSensorType(uint8_t*)'
         void getSensorType(uint8_t* out);
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino: In function 'void tryServoController(DaisyChainPosition)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:114:34: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
     controller.getSensorType(type);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.h:34:14: note:   initializing argument 1 of 'void HiTechnicController::getSensorType(uint8_t*)'
         void getSensorType(uint8_t* out);
              ^~~~~~~~~~~~~

examples/EmptyTemplate

Result: PASS

Sketch uses 81792 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/OpenClosedLoopVelocityLogger

Result: PASS

Sketch uses 84158 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44248 bytes (16%) of dynamic memory, leaving 226088 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.cpp:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t HiTechnicController::read8(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void HiTechnicController::readMultiple(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/ControllerScanner

Result: PASS

Sketch uses 7211 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 495 bytes (8%) of dynamic memory, leaving 5649 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.cpp:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t HiTechnicController::read8(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void HiTechnicController::readMultiple(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/EmptyTemplate

Result: PASS

Sketch uses 4776 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 484 bytes (7%) of dynamic memory, leaving 5660 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.cpp:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t HiTechnicController::read8(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void HiTechnicController::readMultiple(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/OpenClosedLoopVelocityLogger

Result: PASS

Sketch uses 7978 bytes (16%) of program storage space. Maximum is 49152 bytes.
Global variables use 508 bytes (8%) of dynamic memory, leaving 5636 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.cpp:25:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t HiTechnicController::read8(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'void HiTechnicController::readMultiple(uint8_t, uint8_t, uint8_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/ControllerScanner

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino: In function 'void tryMotorController(DaisyChainPosition)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:88:34: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
     controller.getSensorType(type);
                                  ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:22:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.h:34:14: note:   initializing argument 1 of 'void HiTechnicController::getSensorType(uint8_t*)'
         void getSensorType(uint8_t* out);
              ^~~~~~~~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino: In function 'void tryServoController(DaisyChainPosition)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:114:34: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
     controller.getSensorType(type);
                                  ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:22:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.h:34:14: note:   initializing argument 1 of 'void HiTechnicController::getSensorType(uint8_t*)'
         void getSensorType(uint8_t* out);
              ^~~~~~~~~~~~~

examples/EmptyTemplate

Result: PASS

Sketch uses 13788 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/OpenClosedLoopVelocityLogger

Result: PASS

Sketch uses 19860 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3612 bytes (11%) of dynamic memory, leaving 29156 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 203490 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/ControllerScanner

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino: In function 'void tryMotorController(DaisyChainPosition)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:88:34: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
     controller.getSensorType(type);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.h:34:14: note:   initializing argument 1 of 'void HiTechnicController::getSensorType(uint8_t*)'
         void getSensorType(uint8_t* out);
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino: In function 'void tryServoController(DaisyChainPosition)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:114:34: error: invalid conversion from 'char*' to 'uint8_t* {aka unsigned char*}' [-fpermissive]
     controller.getSensorType(type);
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/examples/ControllerScanner/ControllerScanner.ino:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HiTechnic-Arduino/src/HiTechnicController.h:34:14: note:   initializing argument 1 of 'void HiTechnicController::getSensorType(uint8_t*)'
         void getSensorType(uint8_t* out);
              ^

examples/EmptyTemplate

Result: PASS

Sketch uses 209322 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14136 bytes (4%) of dynamic memory, leaving 313544 bytes for local variables. Maximum is 327680 bytes.

examples/OpenClosedLoopVelocityLogger

Result: PASS

Sketch uses 217070 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14160 bytes (4%) of dynamic memory, leaving 313520 bytes for local variables. Maximum is 327680 bytes.