HoverboardAPI - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

HoverboardAPI

Version: 0.1.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	readSpeed	scheduledMessages	PWMsimple
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 159 bytes (7%) of dynamic memory, leaving 1889 bytes for local variables. Maximum is 2048 bytes.

examples/PWMsimple

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/PWMsimple/PWMsimple.ino: In function 'int serialWrapper(unsigned char*, int)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/PWMsimple/PWMsimple.ino:13:15: error: 'Serial1' was not declared in this scope
  return (int) Serial1.write(data,len);
               ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/PWMsimple/PWMsimple.ino:13:15: note: suggested alternative: 'Serial'
  return (int) Serial1.write(data,len);
               ^~~~~~~
               Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/PWMsimple/PWMsimple.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/PWMsimple/PWMsimple.ino:20:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200);
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/PWMsimple/PWMsimple.ino:20:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200);
   ^~~~~~~
   Serial

examples/readSpeed

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino: In function 'int serialWrapper(unsigned char*, int)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino:14:15: error: 'Serial1' was not declared in this scope
  return (int) Serial1.write(data,len);
               ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino:14:15: note: suggested alternative: 'Serial'
  return (int) Serial1.write(data,len);
               ^~~~~~~
               Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino:22:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200);  // Connection to hoverboard
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino:22:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200);  // Connection to hoverboard
   ^~~~~~~
   Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino:50:11: error: 'Serial1' was not declared in this scope
     while(Serial1.available() && i++ < 1024) { // read maximum 1024 bytes at once.
           ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/readSpeed/readSpeed.ino:50:11: note: suggested alternative: 'Serial'
     while(Serial1.available() && i++ < 1024) { // read maximum 1024 bytes at once.
           ^~~~~~~
           Serial

examples/scheduledMessages

Result: FAIL

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino: In function 'int serialWrapper(unsigned char*, int)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino:14:15: error: 'Serial1' was not declared in this scope
  return (int) Serial1.write(data,len);
               ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino:14:15: note: suggested alternative: 'Serial'
  return (int) Serial1.write(data,len);
               ^~~~~~~
               Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino:24:3: error: 'Serial1' was not declared in this scope
   Serial1.begin(115200);  // Connection to hoverboard
   ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino:24:3: note: suggested alternative: 'Serial'
   Serial1.begin(115200);  // Connection to hoverboard
   ^~~~~~~
   Serial
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino: In function 'void loop()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino:73:11: error: 'Serial1' was not declared in this scope
     while(Serial1.available() && i++ < 1024) { // read maximum 1024 bytes at once.
           ^~~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/HoverboardAPI/examples/scheduledMessages/scheduledMessages.ino:73:11: note: suggested alternative: 'Serial'
     while(Serial1.available() && i++ < 1024) { // read maximum 1024 bytes at once.
           ^~~~~~~
           Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/PWMsimple

Result: PASS

Sketch uses 82508 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 51428 bytes (19%) of dynamic memory, leaving 218908 bytes for local variables. Maximum is 270336 bytes.

examples/readSpeed

Result: PASS

Sketch uses 85242 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 54016 bytes (19%) of dynamic memory, leaving 216320 bytes for local variables. Maximum is 270336 bytes.

examples/scheduledMessages

Result: PASS

Sketch uses 85786 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 54052 bytes (19%) of dynamic memory, leaving 216284 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 172 bytes (2%) of dynamic memory, leaving 5972 bytes for local variables. Maximum is 6144 bytes.

examples/PWMsimple

Result: PASS

Sketch uses 8471 bytes (17%) of program storage space. Maximum is 49152 bytes.
Global variables use 5850 bytes (95%) of dynamic memory, leaving 294 bytes for local variables. Maximum is 6144 bytes.
Low memory available, stability problems may occur.

examples/readSpeed

Result: FAIL

Sketch uses 14230 bytes (28%) of program storage space. Maximum is 49152 bytes.
Global variables use 6542 bytes (106%) of dynamic memory, leaving -398 bytes for local variables. Maximum is 6144 bytes.
Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.

examples/scheduledMessages

Result: FAIL

Sketch uses 14532 bytes (29%) of program storage space. Maximum is 49152 bytes.
Global variables use 6560 bytes (106%) of dynamic memory, leaving -416 bytes for local variables. Maximum is 6144 bytes.
Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/PWMsimple

Result: PASS

Sketch uses 18272 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 10996 bytes (33%) of dynamic memory, leaving 21772 bytes for local variables. Maximum is 32768 bytes.

examples/readSpeed

Result: PASS

Sketch uses 28580 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 13584 bytes (41%) of dynamic memory, leaving 19184 bytes for local variables. Maximum is 32768 bytes.

examples/scheduledMessages

Result: PASS

Sketch uses 29124 bytes (11%) of program storage space. Maximum is 262144 bytes.
Global variables use 13604 bytes (41%) of dynamic memory, leaving 19164 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198122 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13092 bytes (3%) of dynamic memory, leaving 314588 bytes for local variables. Maximum is 327680 bytes.

examples/PWMsimple

Result: PASS

Sketch uses 209414 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 21400 bytes (6%) of dynamic memory, leaving 306280 bytes for local variables. Maximum is 327680 bytes.

examples/readSpeed

Result: PASS

Sketch uses 212630 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 24008 bytes (7%) of dynamic memory, leaving 303672 bytes for local variables. Maximum is 327680 bytes.

examples/scheduledMessages

Result: PASS

Sketch uses 212962 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 24024 bytes (7%) of dynamic memory, leaving 303656 bytes for local variables. Maximum is 327680 bytes.