I2C AXP192 Power management - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

I2C AXP192 Power management

Version: 1.0.4
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	AXP192
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'void I2C_AXP192::begin(I2C_AXP192_InitDef)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:9:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "Begin");
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'uint8_t I2C_AXP192::readByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:43:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "readByte(%02X) = %02X", address, val);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'void I2C_AXP192::writeByte(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:52:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "writeByte(%02X) = %02X", address, data);
   ^~~~~~~~

examples/AXP192

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:3:47: error: 'Wire1' was not declared in this scope
 I2C_AXP192 axp192(I2C_AXP192_DEFAULT_ADDRESS, Wire1);
                                               ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:3:47: note: suggested alternative: 'Wire'
 I2C_AXP192 axp192(I2C_AXP192_DEFAULT_ADDRESS, Wire1);
                                               ^~~~~
                                               Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:11:3: error: 'Wire1' was not declared in this scope
   Wire1.begin(21, 22);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:11:3: note: suggested alternative: 'Wire'
   Wire1.begin(21, 22);
   ^~~~~
   Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:33:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryVoltage()          : %7.2f\n", axp192.getBatteryVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:34:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryDischargeCurrent() : %7.2f\n", axp192.getBatteryDischargeCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:35:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryChargeCurrent()    : %7.2f\n", axp192.getBatteryChargeCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:36:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getAcinVolatge()             : %7.2f\n", axp192.getAcinVolatge());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:37:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getAcinCurrent()             : %7.2f\n", axp192.getAcinCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:38:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getVbusVoltage()             : %7.2f\n", axp192.getVbusVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:39:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getVbusCurrent()             : %7.2f\n", axp192.getVbusCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:40:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getInternalTemperature()     : %7.2f\n", axp192.getInternalTemperature());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:41:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getApsVoltage()              : %7.2f\n", axp192.getApsVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:42:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getPekPress()                : %4d\n"  , axp192.getPekPress());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:47:12: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
     Serial.printf("powerOff()\n");
            ^~~~~~
            print

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'void I2C_AXP192::begin(I2C_AXP192_InitDef)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:9:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "Begin");
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'uint8_t I2C_AXP192::readByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:43:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "readByte(%02X) = %02X", address, val);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'void I2C_AXP192::writeByte(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:52:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "writeByte(%02X) = %02X", address, data);
   ^~~~~~~~

examples/AXP192

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:3:47: error: 'Wire1' was not declared in this scope
 I2C_AXP192 axp192(I2C_AXP192_DEFAULT_ADDRESS, Wire1);
                                               ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:3:47: note: suggested alternative: 'Wire'
 I2C_AXP192 axp192(I2C_AXP192_DEFAULT_ADDRESS, Wire1);
                                               ^~~~~
                                               Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:11:3: error: 'Wire1' was not declared in this scope
   Wire1.begin(21, 22);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:11:3: note: suggested alternative: 'Wire'
   Wire1.begin(21, 22);
   ^~~~~
   Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:33:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryVoltage()          : %7.2f\n", axp192.getBatteryVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:34:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryDischargeCurrent() : %7.2f\n", axp192.getBatteryDischargeCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:35:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryChargeCurrent()    : %7.2f\n", axp192.getBatteryChargeCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:36:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getAcinVolatge()             : %7.2f\n", axp192.getAcinVolatge());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:37:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getAcinCurrent()             : %7.2f\n", axp192.getAcinCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:38:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getVbusVoltage()             : %7.2f\n", axp192.getVbusVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:39:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getVbusCurrent()             : %7.2f\n", axp192.getVbusCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:40:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getInternalTemperature()     : %7.2f\n", axp192.getInternalTemperature());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:41:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getApsVoltage()              : %7.2f\n", axp192.getApsVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:42:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getPekPress()                : %4d\n"  , axp192.getPekPress());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:47:12: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
     Serial.printf("powerOff()\n");
            ^~~~~~
            print

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-53F40C88FDDCAB2C7245166168D7CE31/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:17:7: error: expected unqualified-id before 'volatile'
   int GPIO0;
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:17:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:17:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:18:7: error: expected unqualified-id before 'volatile'
   int GPIO1;
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:18:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:18:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:19:7: error: expected unqualified-id before 'volatile'
   int GPIO2;
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:19:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:19:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:20:7: error: expected unqualified-id before 'volatile'
   int GPIO3;
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:20:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:20:7: error: expected ')' before 'volatile'

examples/AXP192

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-5A8B783E9130D4FF9AE97F47EF35B888/sketch/AXP192.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:17:7: error: expected unqualified-id before 'volatile'
   int GPIO0;
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:17:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:17:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:18:7: error: expected unqualified-id before 'volatile'
   int GPIO1;
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:18:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:18:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:19:7: error: expected unqualified-id before 'volatile'
   int GPIO2;
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:19:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:19:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:20:7: error: expected unqualified-id before 'volatile'
   int GPIO3;
       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:20:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.h:20:7: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:3:47: error: 'Wire1' was not declared in this scope
 I2C_AXP192 axp192(I2C_AXP192_DEFAULT_ADDRESS, Wire1);
                                               ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:3:47: note: suggested alternative: 'Wire'
 I2C_AXP192 axp192(I2C_AXP192_DEFAULT_ADDRESS, Wire1);
                                               ^~~~~
                                               Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:11:3: error: 'Wire1' was not declared in this scope
   Wire1.begin(21, 22);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:11:3: note: suggested alternative: 'Wire'
   Wire1.begin(21, 22);
   ^~~~~
   Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:21:5: error: expected primary-expression before '.' token
     .GPIO0  = 2800,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-5A8B783E9130D4FF9AE97F47EF35B888/sketch/AXP192.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:21:6: error: expected unqualified-id before '(' token
     .GPIO0  = 2800,
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:22:5: error: expected primary-expression before '.' token
     .GPIO1  = -1,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-5A8B783E9130D4FF9AE97F47EF35B888/sketch/AXP192.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:22:6: error: expected unqualified-id before '(' token
     .GPIO1  = -1,
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:23:5: error: expected primary-expression before '.' token
     .GPIO2  = -1,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-5A8B783E9130D4FF9AE97F47EF35B888/sketch/AXP192.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:23:6: error: expected unqualified-id before '(' token
     .GPIO2  = -1,
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:24:5: error: expected primary-expression before '.' token
     .GPIO3  = -1,
     ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-5A8B783E9130D4FF9AE97F47EF35B888/sketch/AXP192.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:24:6: error: expected unqualified-id before '(' token
     .GPIO3  = -1,
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:33:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryVoltage()          : %7.2f\n", axp192.getBatteryVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/c

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'void I2C_AXP192::begin(I2C_AXP192_InitDef)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:9:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "Begin");
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'uint8_t I2C_AXP192::readByte(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:43:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "readByte(%02X) = %02X", address, val);
   ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp: In member function 'void I2C_AXP192::writeByte(uint8_t, uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/src/I2C_AXP192.cpp:52:3: error: 'ESP_LOGD' was not declared in this scope
   ESP_LOGD("AXP192", "writeByte(%02X) = %02X", address, data);
   ^~~~~~~~

examples/AXP192

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:3:47: error: 'Wire1' was not declared in this scope
 I2C_AXP192 axp192(I2C_AXP192_DEFAULT_ADDRESS, Wire1);
                                               ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:3:47: note: suggested alternative: 'Wire'
 I2C_AXP192 axp192(I2C_AXP192_DEFAULT_ADDRESS, Wire1);
                                               ^~~~~
                                               Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:11:3: error: 'Wire1' was not declared in this scope
   Wire1.begin(21, 22);
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:11:3: note: suggested alternative: 'Wire'
   Wire1.begin(21, 22);
   ^~~~~
   Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:33:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryVoltage()          : %7.2f\n", axp192.getBatteryVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:34:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryDischargeCurrent() : %7.2f\n", axp192.getBatteryDischargeCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:35:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getBatteryChargeCurrent()    : %7.2f\n", axp192.getBatteryChargeCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:36:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getAcinVolatge()             : %7.2f\n", axp192.getAcinVolatge());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:37:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getAcinCurrent()             : %7.2f\n", axp192.getAcinCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:38:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getVbusVoltage()             : %7.2f\n", axp192.getVbusVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:39:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getVbusCurrent()             : %7.2f\n", axp192.getVbusCurrent());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:40:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getInternalTemperature()     : %7.2f\n", axp192.getInternalTemperature());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:41:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getApsVoltage()              : %7.2f\n", axp192.getApsVoltage());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:42:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
   Serial.printf("getPekPress()                : %4d\n"  , axp192.getPekPress());
          ^~~~~~
          print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_AXP192_Power_management/examples/AXP192/AXP192.ino:47:12: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
     Serial.printf("powerOff()\n");
            ^~~~~~
            print

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 202970 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.

examples/AXP192

Result: PASS

Sketch uses 215978 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14144 bytes (4%) of dynamic memory, leaving 313536 bytes for local variables. Maximum is 327680 bytes.