This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.3
More details
| Board | Claims compatibility | Inclusion | ScanSLG |
SerialSLG |
WebSLG |
|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL |
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /tmp/arduino-testlib3064691300/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /tmp/arduino-testlib3064691300/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1367:10: error: 'class HardwareSerial' has no member na
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/ScanSLG/ScanSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/ScanSLG/ScanSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/u
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/SerialSLG/SerialSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/SerialSLG/SerialSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class HardwareSerial' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-d
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/WebSLG/WebSLG.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi/src/WebServer.h:27:10: fatal error: functional: No such file or directory
#include <functional>
^~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /tmp/arduino-testlib3532435629/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /tmp/arduino-testlib3532435629/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1367:10: error: 'class arduino::UART' has no member named 'printf'; did you mean
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/ScanSLG/ScanSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/ScanSLG/ScanSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/SerialSLG/SerialSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/SerialSLG/SerialSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class arduino::UART' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi/src/HTTPClient.cpp:30:10: fatal error: esp/esp_hal_log.h: No such file or directory
#include "esp/esp_hal_log.h"
^~~~~~~~~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /tmp/arduino-testlib3532435629/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /tmp/arduino-testlib3532435629/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1367:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [67H(0) 825:824(2)] io5_input_mode_configuration\n", slgReg.io
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/ScanSLG/ScanSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/ScanSLG/ScanSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1367:10: error: 'class UartClass' has no member named 'printf'; did you mean 'pr
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/SerialSLG/SerialSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/SerialSLG/SerialSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class UartClass' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1367:10: error: 'class UartClass' has no member named 'printf'; did you
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/WebSLG/WebSLG.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi/src/WebServer.h:27:10: fatal error: functional: No such file or directory
#include <functional>
^~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /tmp/arduino-testlib3064691300/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /tmp/arduino-testlib3064691300/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1367:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [67H(0) 825:824(2)] io5_input_mode_configuration\n", slgReg.io5_input_mode_configuration, slgReg.io5_input_mode_co
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/ScanSLG/ScanSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/ScanSLG/ScanSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1367:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [67H(0) 825:82
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/SerialSLG/SerialSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h: In function 'void debug_print_slg46826(const slg_register_t&)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1342:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(0) 768:768(1)] io_fast_pull_up_down_enable\n", slgReg.io_fast_pull_up_down_enable, slgReg.io_fast_pull_up_down_enable);
^~~~~~
print
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826.h:5:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/examples/SerialSLG/SerialSLG.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1343:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [60H(1) 769:769(1)] i2c_mode_selection\n", slgReg.i2c_mode_selection, slgReg.i2c_mode_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1344:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(0) 777:776(2)] io0_input_mode_configuration\n", slgReg.io0_input_mode_configuration, slgReg.io0_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1345:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(2) 779:778(2)] io0_output_mode_configuration\n", slgReg.io0_output_mode_configuration, slgReg.io0_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1346:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(4) 781:780(2)] io0_pull_up_down_resistance_selection\n", slgReg.io0_pull_up_down_resistance_selection, slgReg.io0_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1347:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(6) 782:782(1)] io0_pull_up_down_selection\n", slgReg.io0_pull_up_down_selection, slgReg.io0_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1348:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [61H(7) 783:783(1)] io0_output_enable\n", slgReg.io0_output_enable, slgReg.io0_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1349:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(0) 785:784(2)] io1_input_mode_configuration\n", slgReg.io1_input_mode_configuration, slgReg.io1_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1350:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(2) 787:786(2)] io1_output_mode_configuration\n", slgReg.io1_output_mode_configuration, slgReg.io1_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1351:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(4) 789:788(2)] io1_pull_up_down_resistance_selection\n", slgReg.io1_pull_up_down_resistance_selection, slgReg.io1_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1352:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [62H(6) 790:790(1)] io1_pull_up_down_selection\n", slgReg.io1_pull_up_down_selection, slgReg.io1_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1353:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(0) 801:800(2)] io2_input_mode_configuration\n", slgReg.io2_input_mode_configuration, slgReg.io2_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1354:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(2) 803:802(2)] io2_output_mode_configuration\n", slgReg.io2_output_mode_configuration, slgReg.io2_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1355:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(4) 805:804(2)] io2_pull_up_down_resistance_selection\n", slgReg.io2_pull_up_down_resistance_selection, slgReg.io2_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1356:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(6) 806:806(1)] io2_pull_up_down_selection\n", slgReg.io2_pull_up_down_selection, slgReg.io2_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1357:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [64H(7) 807:807(1)] io2_output_enable\n", slgReg.io2_output_enable, slgReg.io2_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1358:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(0) 809:808(2)] io3_input_mode_configuration\n", slgReg.io3_input_mode_configuration, slgReg.io3_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1359:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(2) 811:810(2)] io3_output_mode_configuration\n", slgReg.io3_output_mode_configuration, slgReg.io3_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1360:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(4) 813:812(2)] io3_pull_up_down_resistance_selection\n", slgReg.io3_pull_up_down_resistance_selection, slgReg.io3_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1361:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(6) 814:814(1)] io3_pull_up_down_selection\n", slgReg.io3_pull_up_down_selection, slgReg.io3_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1362:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [65H(7) 815:815(1)] io3_output_enable\n", slgReg.io3_output_enable, slgReg.io3_output_enable);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1363:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(0) 817:816(2)] io4_input_mode_configuration\n", slgReg.io4_input_mode_configuration, slgReg.io4_input_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1364:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(2) 819:818(2)] io4_output_mode_configuration\n", slgReg.io4_output_mode_configuration, slgReg.io4_output_mode_configuration);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1365:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(4) 821:820(2)] io4_pull_up_down_resistance_selection\n", slgReg.io4_pull_up_down_resistance_selection, slgReg.io4_pull_up_down_resistance_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1366:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [66H(6) 822:822(1)] io4_pull_up_down_selection\n", slgReg.io4_pull_up_down_selection, slgReg.io4_pull_up_down_selection);
^~~~~~
print
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/I2C_SLG/src/I2C_SLG46826_REG.h:1367:10: error: 'class Serial_' has no member named 'printf'; did you mean 'print'?
Serial.printf("%3d(0x%02X) : [67H(0
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi/src/DNSServer.cpp:2:10: fatal error: lwip/def.h: No such file or directory
#include <lwip/def.h>
^~~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials
Result: FAIL
Traceback (most recent call last):
File "/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/tools/esptool_py/3.0.0/esptool.py", line 38, in <module>
import serial
ImportError: No module named serial
Result: FAIL
Traceback (most recent call last):
File "/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/tools/esptool_py/3.0.0/esptool.py", line 38, in <module>
import serial
ImportError: No module named serial
Result: FAIL
Traceback (most recent call last):
File "/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/tools/esptool_py/3.0.0/esptool.py", line 38, in <module>
import serial
ImportError: No module named serial
Result: FAIL
Traceback (most recent call last):
File "/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/tools/esptool_py/3.0.0/esptool.py", line 38, in <module>
import serial
ImportError: No module named serial
Multiple libraries were found for "WiFi.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA
Multiple libraries were found for "WebServer.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WebServer
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESPEssentials