This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.1.4
More details
| Board | Claims compatibility | Inclusion | Ibus_singlemonitor |
Robotcar |
Ibus2PWM |
Ibus2PWM_ESP32 |
Ibus2PWM_mbed |
Ibus_diy_servo_STM32 |
Ibus_multimonitor |
Ibus_sensor |
|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | PASS | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS |
Result: PASS
Sketch uses 1570 bytes (4%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4252 bytes (13%) of program storage space. Maximum is 32256 bytes. Global variables use 385 bytes (18%) of dynamic memory, leaving 1663 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo/src/ESP32Servo.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_ESP32/Ibus2PWM_ESP32.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo/src/analogWrite.h:3:10: fatal error: cstdint: No such file or directory
#include <cstdint>
^~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:33:14: error: 'Serial1' was not declared in this scope
IBus.begin(Serial1); // iBUS connected to Serial1 - change to Serial0 or Serial2 port when required
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:33:14: note: suggested alternative: 'Serial'
IBus.begin(Serial1); // iBUS connected to Serial1 - change to Serial0 or Serial2 port when required
^~~~~~~
Serial
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:65:14: error: 'Serial1' was not declared in this scope
IBUS.begin(Serial1, IBUSBM_NOTIMER); // Start Ibus connection on serial1 without timer, call IBUS.loop() in Millisecond loop.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:65:14: note: suggested alternative: 'Serial'
IBUS.begin(Serial1, IBUSBM_NOTIMER); // Start Ibus connection on serial1 without timer, call IBUS.loop() in Millisecond loop.
^~~~~~~
Serial
Multiple libraries were found for "PID_v1.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PreMo_-_Virtual_Path_Following
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PID
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:40:19: error: 'Serial1' was not declared in this scope
IBusServo.begin(Serial1);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:40:19: note: suggested alternative: 'Serial'
IBusServo.begin(Serial1);
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:45:20: error: 'Serial2' was not declared in this scope
IBusSensor.begin(Serial2);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:45:20: note: suggested alternative: 'Serial'
IBusSensor.begin(Serial2);
^~~~~~~
Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:29:14: error: 'Serial1' was not declared in this scope
IBus.begin(Serial1);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:29:14: note: suggested alternative: 'Serial'
IBus.begin(Serial1);
^~~~~~~
Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:35:14: error: 'Serial1' was not declared in this scope
IBus.begin(Serial1);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:35:14: note: suggested alternative: 'Serial'
IBus.begin(Serial1);
^~~~~~~
Serial
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:77:14: error: 'Serial1' was not declared in this scope
IBus.begin(Serial1); // iBUS connected to Serial1: 19 (RX) and 18 (TX)
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:77:14: note: suggested alternative: 'Serial'
IBus.begin(Serial1); // iBUS connected to Serial1: 19 (RX) and 18 (TX)
^~~~~~~
Serial
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In function 'void TIMER4_IRQHandler_v()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: error: 'NRF_TIMER4' was not declared in this scope
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: note: suggested alternative: 'NUM_TIMERS'
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In member function 'void IBusBM::begin(arduino::HardwareSerial&, int8_t, int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: error: 'NRF_TIMER4' was not declared in this scope
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:128:28: error: 'TIMER_MODE_MODE_Timer' was not declared in this scope
NRF_TIMER4->MODE = TIMER_MODE_MODE_Timer; // Set the timer in Counter Mode
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:31: error: 'TIMER_BITMODE_BITMODE_16Bit' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:62: error: 'TIMER_BITMODE_BITMODE_Pos' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: error: 'NRF_TIMER2' was not declared in this scope
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:135:38: error: 'TIMER_PRESCALER_PRESCALER_Pos' was not declared in this scope
NRF_TIMER4->PRESCALER = 4 << TIMER_PRESCALER_PRESCALER_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:32: error: 'TIMER_INTENSET_COMPARE0_Enabled' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: error: 'TIMER_INTENSET_COMPARE0_Pos' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: note: suggested alternative: 'TIMER_INTE_ALARM_0_LSB'
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
TIMER_INTE_ALARM_0_LSB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:30: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Enabled' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:69: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Pos' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: error: 'TIMER4_IRQn' was not declared in this scope
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: note: suggested alternative: 'TIMER_IRQ_3n'
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
TIMER_IRQ_3n
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In function 'void TIMER4_IRQHandler_v()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: error: 'NRF_TIMER4' was not declared in this scope
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: note: suggested alternative: 'NUM_TIMERS'
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In member function 'void IBusBM::begin(arduino::HardwareSerial&, int8_t, int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: error: 'NRF_TIMER4' was not declared in this scope
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:128:28: error: 'TIMER_MODE_MODE_Timer' was not declared in this scope
NRF_TIMER4->MODE = TIMER_MODE_MODE_Timer; // Set the timer in Counter Mode
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:31: error: 'TIMER_BITMODE_BITMODE_16Bit' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:62: error: 'TIMER_BITMODE_BITMODE_Pos' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: error: 'NRF_TIMER2' was not declared in this scope
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:135:38: error: 'TIMER_PRESCALER_PRESCALER_Pos' was not declared in this scope
NRF_TIMER4->PRESCALER = 4 << TIMER_PRESCALER_PRESCALER_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:32: error: 'TIMER_INTENSET_COMPARE0_Enabled' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: error: 'TIMER_INTENSET_COMPARE0_Pos' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: note: suggested alternative: 'TIMER_INTE_ALARM_0_LSB'
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
TIMER_INTE_ALARM_0_LSB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:30: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Enabled' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:69: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Pos' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: error: 'TIMER4_IRQn' was not declared in this scope
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: note: suggested alternative: 'TIMER_IRQ_3n'
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
TIMER_IRQ_3n
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo/src/ESP32Servo.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_ESP32/Ibus2PWM_ESP32.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo/src/analogWrite.h:4:10: fatal error: esp32-hal-ledc.h: No such file or directory
#include <esp32-hal-ledc.h>
^~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In function 'void TIMER4_IRQHandler_v()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: error: 'NRF_TIMER4' was not declared in this scope
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: note: suggested alternative: 'NUM_TIMERS'
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In member function 'void IBusBM::begin(arduino::HardwareSerial&, int8_t, int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: error: 'NRF_TIMER4' was not declared in this scope
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:128:28: error: 'TIMER_MODE_MODE_Timer' was not declared in this scope
NRF_TIMER4->MODE = TIMER_MODE_MODE_Timer; // Set the timer in Counter Mode
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:31: error: 'TIMER_BITMODE_BITMODE_16Bit' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:62: error: 'TIMER_BITMODE_BITMODE_Pos' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: error: 'NRF_TIMER2' was not declared in this scope
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:135:38: error: 'TIMER_PRESCALER_PRESCALER_Pos' was not declared in this scope
NRF_TIMER4->PRESCALER = 4 << TIMER_PRESCALER_PRESCALER_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:32: error: 'TIMER_INTENSET_COMPARE0_Enabled' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: error: 'TIMER_INTENSET_COMPARE0_Pos' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: note: suggested alternative: 'TIMER_INTE_ALARM_0_LSB'
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
TIMER_INTE_ALARM_0_LSB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:30: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Enabled' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:69: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Pos' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: error: 'TIMER4_IRQn' was not declared in this scope
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: note: suggested alternative: 'TIMER_IRQ_3n'
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
TIMER_IRQ_3n
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:26:17: error: 'PB6' was not declared in this scope
byte LPWM_pin = PB6; // Drive Left PWM output pin
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:27:17: error: 'PB7' was not declared in this scope
byte RPWM_pin = PB7; // Drive Right PWM output pin
^~~
Multiple libraries were found for "PID_v1.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PreMo_-_Virtual_Path_Following
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PID
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In function 'void TIMER4_IRQHandler_v()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: error: 'NRF_TIMER4' was not declared in this scope
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: note: suggested alternative: 'NUM_TIMERS'
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In member function 'void IBusBM::begin(arduino::HardwareSerial&, int8_t, int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: error: 'NRF_TIMER4' was not declared in this scope
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:128:28: error: 'TIMER_MODE_MODE_Timer' was not declared in this scope
NRF_TIMER4->MODE = TIMER_MODE_MODE_Timer; // Set the timer in Counter Mode
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:31: error: 'TIMER_BITMODE_BITMODE_16Bit' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:62: error: 'TIMER_BITMODE_BITMODE_Pos' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: error: 'NRF_TIMER2' was not declared in this scope
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:135:38: error: 'TIMER_PRESCALER_PRESCALER_Pos' was not declared in this scope
NRF_TIMER4->PRESCALER = 4 << TIMER_PRESCALER_PRESCALER_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:32: error: 'TIMER_INTENSET_COMPARE0_Enabled' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: error: 'TIMER_INTENSET_COMPARE0_Pos' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: note: suggested alternative: 'TIMER_INTE_ALARM_0_LSB'
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
TIMER_INTE_ALARM_0_LSB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:30: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Enabled' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:69: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Pos' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: error: 'TIMER4_IRQn' was not declared in this scope
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: note: suggested alternative: 'TIMER_IRQ_3n'
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
TIMER_IRQ_3n
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In function 'void TIMER4_IRQHandler_v()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: error: 'NRF_TIMER4' was not declared in this scope
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: note: suggested alternative: 'NUM_TIMERS'
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In member function 'void IBusBM::begin(arduino::HardwareSerial&, int8_t, int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: error: 'NRF_TIMER4' was not declared in this scope
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:128:28: error: 'TIMER_MODE_MODE_Timer' was not declared in this scope
NRF_TIMER4->MODE = TIMER_MODE_MODE_Timer; // Set the timer in Counter Mode
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:31: error: 'TIMER_BITMODE_BITMODE_16Bit' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:62: error: 'TIMER_BITMODE_BITMODE_Pos' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: error: 'NRF_TIMER2' was not declared in this scope
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:135:38: error: 'TIMER_PRESCALER_PRESCALER_Pos' was not declared in this scope
NRF_TIMER4->PRESCALER = 4 << TIMER_PRESCALER_PRESCALER_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:32: error: 'TIMER_INTENSET_COMPARE0_Enabled' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: error: 'TIMER_INTENSET_COMPARE0_Pos' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: note: suggested alternative: 'TIMER_INTE_ALARM_0_LSB'
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
TIMER_INTE_ALARM_0_LSB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:30: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Enabled' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:69: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Pos' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: error: 'TIMER4_IRQn' was not declared in this scope
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: note: suggested alternative: 'TIMER_IRQ_3n'
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
TIMER_IRQ_3n
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In function 'void TIMER4_IRQHandler_v()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: error: 'NRF_TIMER4' was not declared in this scope
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: note: suggested alternative: 'NUM_TIMERS'
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In member function 'void IBusBM::begin(arduino::HardwareSerial&, int8_t, int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: error: 'NRF_TIMER4' was not declared in this scope
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:128:28: error: 'TIMER_MODE_MODE_Timer' was not declared in this scope
NRF_TIMER4->MODE = TIMER_MODE_MODE_Timer; // Set the timer in Counter Mode
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:31: error: 'TIMER_BITMODE_BITMODE_16Bit' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:62: error: 'TIMER_BITMODE_BITMODE_Pos' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: error: 'NRF_TIMER2' was not declared in this scope
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:135:38: error: 'TIMER_PRESCALER_PRESCALER_Pos' was not declared in this scope
NRF_TIMER4->PRESCALER = 4 << TIMER_PRESCALER_PRESCALER_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:32: error: 'TIMER_INTENSET_COMPARE0_Enabled' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: error: 'TIMER_INTENSET_COMPARE0_Pos' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: note: suggested alternative: 'TIMER_INTE_ALARM_0_LSB'
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
TIMER_INTE_ALARM_0_LSB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:30: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Enabled' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:69: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Pos' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: error: 'TIMER4_IRQn' was not declared in this scope
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: note: suggested alternative: 'TIMER_IRQ_3n'
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
TIMER_IRQ_3n
Result: FAIL
WARNING: library VNH3SP30 claims to run on avr, esp32, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In function 'void TIMER4_IRQHandler_v()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: error: 'NRF_TIMER4' was not declared in this scope
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:53:9: note: suggested alternative: 'NUM_TIMERS'
if (NRF_TIMER4->EVENTS_COMPARE[0] == 1) {
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp: In member function 'void IBusBM::begin(arduino::HardwareSerial&, int8_t, int8_t, int8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: error: 'NRF_TIMER4' was not declared in this scope
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:127:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER4->TASKS_STOP = 1; // Stop timer
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:128:28: error: 'TIMER_MODE_MODE_Timer' was not declared in this scope
NRF_TIMER4->MODE = TIMER_MODE_MODE_Timer; // Set the timer in Counter Mode
^~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:31: error: 'TIMER_BITMODE_BITMODE_16Bit' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:129:62: error: 'TIMER_BITMODE_BITMODE_Pos' was not declared in this scope
NRF_TIMER4->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: error: 'NRF_TIMER2' was not declared in this scope
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:130:9: note: suggested alternative: 'NUM_TIMERS'
NRF_TIMER2->TASKS_CLEAR = 1; // clear the task first to be usable for later
^~~~~~~~~~
NUM_TIMERS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:135:38: error: 'TIMER_PRESCALER_PRESCALER_Pos' was not declared in this scope
NRF_TIMER4->PRESCALER = 4 << TIMER_PRESCALER_PRESCALER_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:32: error: 'TIMER_INTENSET_COMPARE0_Enabled' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: error: 'TIMER_INTENSET_COMPARE0_Pos' was not declared in this scope
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:139:67: note: suggested alternative: 'TIMER_INTE_ALARM_0_LSB'
NRF_TIMER4->INTENSET = TIMER_INTENSET_COMPARE0_Enabled << TIMER_INTENSET_COMPARE0_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~
TIMER_INTE_ALARM_0_LSB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:30: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Enabled' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:140:69: error: 'TIMER_SHORTS_COMPARE0_CLEAR_Pos' was not declared in this scope
NRF_TIMER4->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Enabled << TIMER_SHORTS_COMPARE0_CLEAR_Pos;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: error: 'TIMER4_IRQn' was not declared in this scope
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.cpp:142:24: note: suggested alternative: 'TIMER_IRQ_3n'
NVIC_EnableIRQ(TIMER4_IRQn);
^~~~~~~~~~~
TIMER_IRQ_3n
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /tmp/arduino-testlib1214012273/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-16365665F3DD562948EA07A6CC40CBD8/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /tmp/arduino-testlib1214012273/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-16365665F3DD562948EA07A6CC40CBD8/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-B2C8686B14D96AEE40216DDE78501C9E/sketch/Ibus2PWM.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-B2C8686B14D96AEE40216DDE78501C9E/sketch/Ibus2PWM.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino:30:20: error: no matching function for call to 'IBusBM::begin(UartClass&)'
IBus.begin(Serial); // iBUS connected to Serial0 - change to Serial1 or Serial2 port when required
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: candidate: void IBusBM::begin(int&, int8_t, int8_t, int8_t)
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: no known conversion for argument 1 from 'UartClass' to 'int&'
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo/src/ESP32Servo.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_ESP32/Ibus2PWM_ESP32.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo/src/analogWrite.h:3:10: fatal error: cstdint: No such file or directory
#include <cstdint>
^~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-BDE9C3509E8AD393BEF4B7CEB2D38ED6/sketch/Ibus2PWM_mbed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-BDE9C3509E8AD393BEF4B7CEB2D38ED6/sketch/Ibus2PWM_mbed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:33:21: error: no matching function for call to 'IBusBM::begin(UartClass&)'
IBus.begin(Serial1); // iBUS connected to Serial1 - change to Serial0 or Serial2 port when required
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: candidate: void IBusBM::begin(int&, int8_t, int8_t, int8_t)
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: no known conversion for argument 1 from 'UartClass' to 'int&'
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-79D09FD0B27D3F3F09BA404B412DBAF5/sketch/Ibus_diy_servo_STM32.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-79D09FD0B27D3F3F09BA404B412DBAF5/sketch/Ibus_diy_servo_STM32.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:26:17: error: 'PB6' was not declared in this scope
byte LPWM_pin = PB6; // Drive Left PWM output pin
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:26:17: note: suggested alternative: 'PB'
byte LPWM_pin = PB6; // Drive Left PWM output pin
^~~
PB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:27:17: error: 'PB7' was not declared in this scope
byte RPWM_pin = PB7; // Drive Right PWM output pin
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:27:17: note: suggested alternative: 'PB'
byte RPWM_pin = PB7; // Drive Right PWM output pin
^~~
PB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:65:37: error: no matching function for call to 'IBusBM::begin(UartClass&, int)'
IBUS.begin(Serial1, IBUSBM_NOTIMER); // Start Ibus connection on serial1 without timer, call IBUS.loop() in Millisecond loop.
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: candidate: void IBusBM::begin(int&, int8_t, int8_t, int8_t)
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: no known conversion for argument 1 from 'UartClass' to 'int&'
Multiple libraries were found for "PID_v1.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PreMo_-_Virtual_Path_Following
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PID
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-CAB6959010A4E35E74E5CF299A1E9497/sketch/Ibus_multimonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-CAB6959010A4E35E74E5CF299A1E9497/sketch/Ibus_multimonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:40:26: error: no matching function for call to 'IBusBM::begin(UartClass&)'
IBusServo.begin(Serial1);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: candidate: void IBusBM::begin(int&, int8_t, int8_t, int8_t)
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: no known conversion for argument 1 from 'UartClass' to 'int&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:45:20: error: 'Serial2' was not declared in this scope
IBusSensor.begin(Serial2);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:45:20: note: suggested alternative: 'Serial1'
IBusSensor.begin(Serial2);
^~~~~~~
Serial1
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-31F12B31C5CA8270135439A10F80053F/sketch/Ibus_sensor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-31F12B31C5CA8270135439A10F80053F/sketch/Ibus_sensor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:29:21: error: no matching function for call to 'IBusBM::begin(UartClass&)'
IBus.begin(Serial1);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: candidate: void IBusBM::begin(int&, int8_t, int8_t, int8_t)
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: no known conversion for argument 1 from 'UartClass' to 'int&'
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-DE09D24359E1B5A97570F587935FC22B/sketch/Ibus_singlemonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-DE09D24359E1B5A97570F587935FC22B/sketch/Ibus_singlemonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:35:21: error: no matching function for call to 'IBusBM::begin(UartClass&)'
IBus.begin(Serial1);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: candidate: void IBusBM::begin(int&, int8_t, int8_t, int8_t)
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: no known conversion for argument 1 from 'UartClass' to 'int&'
Result: FAIL
WARNING: library VNH3SP30 claims to run on avr, esp32, stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:50:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-6A70F2C79CDA5C21129D6D595BD6381D/sketch/Robotcar.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:50:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/UART.h:27:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:140,
from /tmp/arduino-sketch-6A70F2C79CDA5C21129D6D595BD6381D/sketch/Robotcar.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:77:21: error: no matching function for call to 'IBusBM::begin(UartClass&)'
IBus.begin(Serial1); // iBUS connected to Serial1: 19 (RX) and 18 (TX)
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:50:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: candidate: void IBusBM::begin(int&, int8_t, int8_t, int8_t)
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: no known conversion for argument 1 from 'UartClass' to 'int&'
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /tmp/arduino-testlib2440237966/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-308324BD18954D4A13CEDDC847A43239/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /tmp/arduino-testlib2440237966/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-308324BD18954D4A13CEDDC847A43239/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-B2C8686B14D96AEE40216DDE78501C9E/sketch/Ibus2PWM.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-B2C8686B14D96AEE40216DDE78501C9E/sketch/Ibus2PWM.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino:30:20: error: cannot bind non-const lvalue reference of type 'int&' to an rvalue of type 'int'
IBus.begin(Serial); // iBUS connected to Serial0 - change to Serial1 or Serial2 port when required
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:112:0,
from /tmp/arduino-sketch-B2C8686B14D96AEE40216DDE78501C9E/sketch/Ibus2PWM.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/USB/USBAPI.h:116:2: note: after user-defined conversion: Serial_::operator bool()
operator bool();
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM/Ibus2PWM.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: initializing argument 1 of 'void IBusBM::begin(int&, int8_t, int8_t, int8_t)'
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo/src/ESP32Servo.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_ESP32/Ibus2PWM_ESP32.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ESP32Servo/src/analogWrite.h:4:10: fatal error: esp32-hal-ledc.h: No such file or directory
#include <esp32-hal-ledc.h>
^~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-BDE9C3509E8AD393BEF4B7CEB2D38ED6/sketch/Ibus2PWM_mbed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-BDE9C3509E8AD393BEF4B7CEB2D38ED6/sketch/Ibus2PWM_mbed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:33:21: error: cannot bind non-const lvalue reference of type 'int&' to an rvalue of type 'int'
IBus.begin(Serial1); // iBUS connected to Serial1 - change to Serial0 or Serial2 port when required
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-BDE9C3509E8AD393BEF4B7CEB2D38ED6/sketch/Ibus2PWM_mbed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:49:5: note: after user-defined conversion: virtual Uart::operator bool()
operator bool() { return true; }
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus2PWM_mbed/Ibus2PWM_mbed.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: initializing argument 1 of 'void IBusBM::begin(int&, int8_t, int8_t, int8_t)'
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-79D09FD0B27D3F3F09BA404B412DBAF5/sketch/Ibus_diy_servo_STM32.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-79D09FD0B27D3F3F09BA404B412DBAF5/sketch/Ibus_diy_servo_STM32.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:26:17: error: 'PB6' was not declared in this scope
byte LPWM_pin = PB6; // Drive Left PWM output pin
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:27:17: error: 'PB7' was not declared in this scope
byte RPWM_pin = PB7; // Drive Right PWM output pin
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:65:37: error: cannot bind non-const lvalue reference of type 'int&' to an rvalue of type 'int'
IBUS.begin(Serial1, IBUSBM_NOTIMER); // Start Ibus connection on serial1 without timer, call IBUS.loop() in Millisecond loop.
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-79D09FD0B27D3F3F09BA404B412DBAF5/sketch/Ibus_diy_servo_STM32.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:49:5: note: after user-defined conversion: virtual Uart::operator bool()
operator bool() { return true; }
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:20:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: initializing argument 1 of 'void IBusBM::begin(int&, int8_t, int8_t, int8_t)'
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
Multiple libraries were found for "PID_v1.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PreMo_-_Virtual_Path_Following
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PID
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-CAB6959010A4E35E74E5CF299A1E9497/sketch/Ibus_multimonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-CAB6959010A4E35E74E5CF299A1E9497/sketch/Ibus_multimonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:40:26: error: cannot bind non-const lvalue reference of type 'int&' to an rvalue of type 'int'
IBusServo.begin(Serial1);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-CAB6959010A4E35E74E5CF299A1E9497/sketch/Ibus_multimonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:49:5: note: after user-defined conversion: virtual Uart::operator bool()
operator bool() { return true; }
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: initializing argument 1 of 'void IBusBM::begin(int&, int8_t, int8_t, int8_t)'
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:45:27: error: cannot bind non-const lvalue reference of type 'int&' to an rvalue of type 'int'
IBusSensor.begin(Serial2);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-CAB6959010A4E35E74E5CF299A1E9497/sketch/Ibus_multimonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:49:5: note: after user-defined conversion: virtual Uart::operator bool()
operator bool() { return true; }
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_multimonitor/Ibus_multimonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: initializing argument 1 of 'void IBusBM::begin(int&, int8_t, int8_t, int8_t)'
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-31F12B31C5CA8270135439A10F80053F/sketch/Ibus_sensor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-31F12B31C5CA8270135439A10F80053F/sketch/Ibus_sensor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:29:21: error: cannot bind non-const lvalue reference of type 'int&' to an rvalue of type 'int'
IBus.begin(Serial1);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-31F12B31C5CA8270135439A10F80053F/sketch/Ibus_sensor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:49:5: note: after user-defined conversion: virtual Uart::operator bool()
operator bool() { return true; }
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_sensor/Ibus_sensor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: initializing argument 1 of 'void IBusBM::begin(int&, int8_t, int8_t, int8_t)'
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
Result: FAIL
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-DE09D24359E1B5A97570F587935FC22B/sketch/Ibus_singlemonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-DE09D24359E1B5A97570F587935FC22B/sketch/Ibus_singlemonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:35:21: error: cannot bind non-const lvalue reference of type 'int&' to an rvalue of type 'int'
IBus.begin(Serial1);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-DE09D24359E1B5A97570F587935FC22B/sketch/Ibus_singlemonitor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:49:5: note: after user-defined conversion: virtual Uart::operator bool()
operator bool() { return true; }
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_singlemonitor/Ibus_singlemonitor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: initializing argument 1 of 'void IBusBM::begin(int&, int8_t, int8_t, int8_t)'
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
Result: FAIL
WARNING: library VNH3SP30 claims to run on avr, esp32, stm32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library IBusBM claims to run on avr, esp32, stm32, mbed architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:50:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: reference to 'HardwareSerial' is ambiguous
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-6A70F2C79CDA5C21129D6D595BD6381D/sketch/Robotcar.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:50:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:14: error: 'HardwareSerial' has not been declared
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:68:3: error: reference to 'HardwareSerial' is ambiguous
HardwareSerial *stream; // serial port
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:36:7: note: candidates are: class HardwareSerial
class HardwareSerial;
^~~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:21:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-6A70F2C79CDA5C21129D6D595BD6381D/sketch/Robotcar.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSerial.h:87:7: note: class arduino::HardwareSerial
class HardwareSerial : public Stream
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:77:21: error: cannot bind non-const lvalue reference of type 'int&' to an rvalue of type 'int'
IBus.begin(Serial1); // iBUS connected to Serial1: 19 (RX) and 18 (TX)
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:165:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51,
from /tmp/arduino-sketch-6A70F2C79CDA5C21129D6D595BD6381D/sketch/Robotcar.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Uart.h:49:5: note: after user-defined conversion: virtual Uart::operator bool()
operator bool() { return true; }
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Robotcar/Robotcar.ino:50:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/src/IBusBM.h:43:8: note: initializing argument 1 of 'void IBusBM::begin(int&, int8_t, int8_t, int8_t)'
void begin(HardwareSerial &serial, int8_t timerid=0, int8_t rxPin=-1, int8_t txPin=-1);
^~~~~
Result: PASS
Sketch uses 200414 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 208710 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13744 bytes (4%) of dynamic memory, leaving 313936 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 212978 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13896 bytes (4%) of dynamic memory, leaving 313784 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 208750 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13744 bytes (4%) of dynamic memory, leaving 313936 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:26:17: error: 'PB6' was not declared in this scope
byte LPWM_pin = PB6; // Drive Left PWM output pin
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:27:17: error: 'PB7' was not declared in this scope
byte RPWM_pin = PB7; // Drive Right PWM output pin
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:97:32: error: 'analogWrite' was not declared in this scope
analogWrite(LPWM_pin, 0);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:125:34: error: 'analogWrite' was not declared in this scope
analogWrite(RPWM_pin, 0); // Disable RPWM_pin
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBusBM/examples/Ibus_diy_servo_STM32/Ibus_diy_servo_STM32.ino:130:34: error: 'analogWrite' was not declared in this scope
analogWrite(LPWM_pin, 0); // Disable LPWM_pin
^
Multiple libraries were found for "PID_v1.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PreMo_-_Virtual_Path_Following
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/PID
Result: PASS
Sketch uses 207010 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13856 bytes (4%) of dynamic memory, leaving 313824 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 207330 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13688 bytes (4%) of dynamic memory, leaving 313992 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 206978 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13688 bytes (4%) of dynamic memory, leaving 313992 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 211270 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 13888 bytes (4%) of dynamic memory, leaving 313792 bytes for local variables. Maximum is 327680 bytes.