This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.0
More details
| Board | Claims compatibility | Inclusion | configureStepperMotor |
testStepperMotor |
|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | PASS | PASS |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | PASS |
Result: PASS
Sketch uses 490 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2598 bytes (8%) of program storage space. Maximum is 32256 bytes. Global variables use 224 bytes (10%) of dynamic memory, leaving 1824 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 4392 bytes (13%) of program storage space. Maximum is 32256 bytes. Global variables use 524 bytes (25%) of dynamic memory, leaving 1524 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 79652 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43492 bytes (16%) of dynamic memory, leaving 226844 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 82872 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43476 bytes (16%) of dynamic memory, leaving 226860 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 3614 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 217 bytes (3%) of dynamic memory, leaving 5927 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 5241 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 201 bytes (3%) of dynamic memory, leaving 5943 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/examples/configureStepperMotor/configureStepperMotor.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/examples/configureStepperMotor/configureStepperMotor.ino:49:57: error: no matching function for call to 'Stepper_motor::configure(Serial_&, IFX9201_STEPPERMOTOR_config_t*)'
MyStepperMotor.configure(CONFIG_SERIAL, &example_config);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/examples/configureStepperMotor/configureStepperMotor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/src/IFX9201_XMC1300_StepperMotor.h:46:7: note: candidate: bool Stepper_motor::configure(arduino::HardwareSerial&, IFX9201_STEPPERMOTOR_config_t*)
bool configure(HardwareSerial &bus, IFX9201_STEPPERMOTOR_config_t *config);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/src/IFX9201_XMC1300_StepperMotor.h:46:7: note: no known conversion for argument 1 from 'Serial_' to 'arduino::HardwareSerial&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/examples/configureStepperMotor/configureStepperMotor.ino:55:60: error: no matching function for call to 'Stepper_motor::configRead(Serial_&, IFX9201_STEPPERMOTOR_config_t*)'
MyStepperMotor.configRead(CONFIG_SERIAL, &config_read_back);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/examples/configureStepperMotor/configureStepperMotor.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/src/IFX9201_XMC1300_StepperMotor.h:49:7: note: candidate: void Stepper_motor::configRead(arduino::HardwareSerial&, IFX9201_STEPPERMOTOR_config_t*)
void configRead(HardwareSerial &bus, IFX9201_STEPPERMOTOR_config_t *config);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IFX9201_XMC1300_StepperMotor/src/IFX9201_XMC1300_StepperMotor.h:49:7: note: no known conversion for argument 1 from 'Serial_' to 'arduino::HardwareSerial&'
Result: PASS
Sketch uses 16996 bytes (6%) of program storage space. Maximum is 262144 bytes. Global variables use 3024 bytes (9%) of dynamic memory, leaving 29744 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 200606 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 205458 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13464 bytes (4%) of dynamic memory, leaving 314216 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 205986 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13448 bytes (4%) of dynamic memory, leaving 314232 bytes for local variables. Maximum is 327680 bytes.