This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.4.0
More details
| Board | Claims compatibility | Inclusion | Write_Read_Crc32 |
Disable_Global_Lock |
Power_Down_Up |
Read_Data |
Read_Registers |
Reset |
Read_All |
Read_Ids |
Read_Security_Data |
Set_Speed |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: PASS
This library has no main header file so an empty one was created.
Sketch uses 1332 bytes (4%) of program storage space. Maximum is 32256 bytes. Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Disable_Global_Lock/Disable_Global_Lock.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Power_Down_Up/Power_Down_Up.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_All/Read_All.ino:7:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Data/Read_Data.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 3116 bytes (9%) of program storage space. Maximum is 32256 bytes. Global variables use 258 bytes (12%) of dynamic memory, leaving 1790 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Registers/Read_Registers.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 4304 bytes (13%) of program storage space. Maximum is 32256 bytes. Global variables use 256 bytes (12%) of dynamic memory, leaving 1792 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Reset/Reset.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Set_Speed/Set_Speed.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Write_Read_Crc32/Write_Read_Crc32.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:115:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::readSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:144:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeReadSpi(uint8_t*, uint32_t, uint8_t*, long unsigned int, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:172:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'void ComDriverSpi::startWriteSpiManual()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:198:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Disable_Global_Lock/Disable_Global_Lock.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Power_Down_Up/Power_Down_Up.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_All/Read_All.ino:7:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Data/Read_Data.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:115:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::readSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:144:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeReadSpi(uint8_t*, uint32_t, uint8_t*, long unsigned int, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:172:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'void ComDriverSpi::startWriteSpiManual()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:198:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Registers/Read_Registers.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:115:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::readSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:144:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeReadSpi(uint8_t*, uint32_t, uint8_t*, long unsigned int, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:172:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'void ComDriverSpi::startWriteSpiManual()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:198:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/SPI/SPI.h:22:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Reset/Reset.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Set_Speed/Set_Speed.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Write_Read_Crc32/Write_Read_Crc32.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 4942 bytes (10%) of program storage space. Maximum is 49152 bytes. Global variables use 195 bytes (3%) of dynamic memory, leaving 5949 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Disable_Global_Lock/Disable_Global_Lock.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Power_Down_Up/Power_Down_Up.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_All/Read_All.ino:7:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Data/Read_Data.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6236 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 306 bytes (4%) of dynamic memory, leaving 5838 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Registers/Read_Registers.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: PASS
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 7416 bytes (15%) of program storage space. Maximum is 49152 bytes. Global variables use 306 bytes (4%) of dynamic memory, leaving 5838 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Reset/Reset.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Set_Speed/Set_Speed.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Write_Read_Crc32/Write_Read_Crc32.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
This library has no main header file so an empty one was created.
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:115:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::readSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:144:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeReadSpi(uint8_t*, uint32_t, uint8_t*, long unsigned int, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:172:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'void ComDriverSpi::startWriteSpiManual()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:198:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Disable_Global_Lock/Disable_Global_Lock.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Power_Down_Up/Power_Down_Up.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_All/Read_All.ino:7:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Data/Read_Data.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:115:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::readSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:144:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeReadSpi(uint8_t*, uint32_t, uint8_t*, long unsigned int, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:172:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'void ComDriverSpi::startWriteSpiManual()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:198:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Registers/Read_Registers.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:115:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::readSpi(uint8_t*, uint32_t, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:144:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'bool ComDriverSpi::writeReadSpi(uint8_t*, uint32_t, uint8_t*, long unsigned int, ComDriverSpi::transferOption_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:172:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp: In member function 'void ComDriverSpi::startWriteSpiManual()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:198:48: error: invalid conversion from 'uint8_t {aka unsigned char}' to 'BitOrder' [-fpermissive]
SPI.beginTransaction(SPISettings(_frequency, _dataOrder, _dataMode));
^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/SPI/SPI.h:24:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.h:42,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ComDriverSpi/src/ComDriverSpi.cpp:2:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/HardwareSPI.h:47:3: note: initializing argument 2 of 'arduino::SPISettings::SPISettings(uint32_t, BitOrder, int)'
SPISettings(uint32_t clock, BitOrder bitOrder, int dataMode) {
^~~~~~~~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Reset/Reset.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Set_Speed/Set_Speed.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Write_Read_Crc32/Write_Read_Crc32.ino:8:10: fatal error: printSerialFlashSst26.h: No such file or directory
#include "printSerialFlashSst26.h"
^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Disable_Global_Lock/Disable_Global_Lock.ino:8:35: fatal error: printSerialFlashSst26.h: No such file or directory compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Power_Down_Up/Power_Down_Up.ino:8:35: fatal error: printSerialFlashSst26.h: No such file or directory compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_All/Read_All.ino:7:35: fatal error: printSerialFlashSst26.h: No such file or directory compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Data/Read_Data.ino:8:35: fatal error: printSerialFlashSst26.h: No such file or directory compilation terminated.
Result: FAIL
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Read_Registers/Read_Registers.ino:8:35: fatal error: printSerialFlashSst26.h: No such file or directory compilation terminated.
Result: FAIL
WARNING: library IGB-FlashSst26 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). WARNING: library ComDriverSpi claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Reset/Reset.ino:8:35: fatal error: printSerialFlashSst26.h: No such file or directory compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Set_Speed/Set_Speed.ino:8:35: fatal error: printSerialFlashSst26.h: No such file or directory compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IGB-FlashSst26/examples/Write_Read_Crc32/Write_Read_Crc32.ino:8:35: fatal error: printSerialFlashSst26.h: No such file or directory compilation terminated.