INA2xx - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

INA2xx

Version: 1.1.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	DisplayReadings	BackgroundRead	BackgroundRead_ESP32	DataLogger
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	PASS	FAIL	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.

examples/BackgroundRead

Result: PASS

Sketch uses 12540 bytes (38%) of program storage space. Maximum is 32256 bytes.
Global variables use 540 bytes (26%) of dynamic memory, leaving 1508 bytes for local variables. Maximum is 2048 bytes.

examples/BackgroundRead_ESP32

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead_ESP32/BackgroundRead_ESP32.ino:74:2: error: #error Example program only functions on the ESP32 / ESP8266 platforms
 #error Example program only functions on the ESP32 / ESP8266 platforms
  ^~~~~
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/DataLogger

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:1: error: stray '\357' in program
 /*
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:2: error: stray '\273' in program
 /*
  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:3: error: stray '\277' in program
 /*
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:404:7: error: 'class INA_Class' has no member named 'AlertOnConversion'; did you mean 'alertOnConversion'?
   INA.AlertOnConversion(true, deviceNumber);            // Make alert pin go low on finish  //
       ^~~~~~~~~~~~~~~~~
       alertOnConversion
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/DisplayReadings

Result: PASS

Sketch uses 13834 bytes (42%) of program storage space. Maximum is 32256 bytes.
Global variables use 742 bytes (36%) of dynamic memory, leaving 1306 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/BackgroundRead

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:75:2: error: #error Example program only functions on Atmel AVR-Based platforms
 #error Example program only functions on Atmel AVR-Based platforms
  ^~~~~

examples/BackgroundRead_ESP32

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead_ESP32/BackgroundRead_ESP32.ino:74:2: error: #error Example program only functions on the ESP32 / ESP8266 platforms
 #error Example program only functions on the ESP32 / ESP8266 platforms
  ^~~~~

examples/DataLogger

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:1: error: stray '\357' in program
 /*
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:2: error: stray '\273' in program
 /*
  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:3: error: stray '\277' in program
 /*
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:134:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(PCINT0_vect) {
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:262:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER1_COMPA_vect) {
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:134:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(PCINT0_vect) {
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:262:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER1_COMPA_vect) {
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:366:4: error: 'digitalPinToPCMSK' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) |=
    ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:366:4: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) |=
    ^~~~~~~~~~~~~~~~~
    digitalPinToPort
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-D0DC63C5ED3642AAAD069D3008FDF41A/sketch/DataLogger.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:367:11: error: 'digitalPinToPCMSKbit' was not declared in this scope
       bit(digitalPinToPCMSKbit(INA_ALERT_PIN));       // Enable PCMSK pin                 //
           ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:72:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:367:11: note: suggested alternative: 'digitalPinToPort'
       bit(digitalPinToPCMSKbit(INA_ALERT_PIN));       // Enable PCMSK pin                 //
           ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:72:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:3: error: 'PCIFR' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-D0DC63C5ED3642AAAD069D3008FDF41A/sketch/DataLogger.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:16: error: 'digitalPinToPCICRbit' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
                ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:72:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:16: note: suggested alternative: 'digitalPinToPort'
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
                ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Common.h:72:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:369:3: error: 'PCICR' was not declared in this scope
   PCICR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // enable interrupt for the group   //
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:404:7: error: 'class INA_Class' has no member named 'AlertOnConversion'; did you mean 'alertOnConversion'?
   INA.AlertOnConversion(true, deviceNumber);            // Make alert pin go low on finish  //
       ^~~~~~~~~~~~~~~~~
       alertOnConversion
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:417:3: error: 'cli' was not declared in this scope
   cli();           // disable interrupts while setting //
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:418:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0;      // TCCR1A register reset            //
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:419:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0;      // TCCR1B register reset            //
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:420:3: error: 'TCNT1' was not declared in this scope
   TCNT1  = 0;      // initialize counter               //
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:420:3: note: suggested alternative: 'SCNd16'
   TCNT1  = 0;      // initialize counter               //
   ^~~~~
   SCNd16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:421:3: error: 'OCR1A' was not declared in this scope
   OCR1A  = 15624;  // ((16*10^6) / (1*1024)) - 1       //
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:422:19: error: 'WGM12' was not declared in this scope
   TCCR1B |= (1 << WGM12);               // Enable CTC mode                  //
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:423:19: error: 'CS12' was not declared in this scope
   TCCR1B |= (1 << CS12) | (1 << CS10);  // CS10 & CS12 for 1024 prescaler   //
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:423:19: note: suggested alternative: 'p12'
   TCCR1B |= (1 << CS12) | (1 << CS10);  // CS10 & CS12 for 1024 prescaler   //
                   ^~~~
                   p12
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:423:33: error: 'CS10' was not declared in this scope
   TCCR1B |= (1 << CS12) | (1 << CS10);  // CS10 & CS12 for 1024 prescaler   //
                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:423:33: note: suggested alternative: 'B110'
   TCCR1B |= (1 << CS12) | (1 << CS10);  // CS10 & CS12 for 1024 prescaler   //
                                 ^~~~
                                 B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:424:3: error: 'TIMSK1' was not declared in this scope
   TIMSK1 |= (1 << OCIE1A);              // Enable timer compare interrupt   //
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:424:3: note: suggested alternative: 'TIMER'
   TIMSK1 |= (1 << OCIE1A);              // Enable timer compare interrupt   //
   ^~~~~~
   TIMER
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:424:19: error: 'OCIE1A' was not declared in this scope
   TIMSK1 |= (1 << OCIE1A);              // Enable timer compare interrupt   //
                   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:425:3: error: 'sei' was not declared in this scope
   sei();                                // re-enable interrupts             //
   ^~~

examples/DisplayReadings

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DisplayReadings/DisplayReadings.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DisplayReadings/DisplayReadings.ino:145:5: error: 'dtostrf' was not declared in this scope
     dtostrf(INA.getBusMilliVolts(i) / 1000.0, 7, 4, busChar);      // Convert floating point to char
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DisplayReadings/DisplayReadings.ino:145:5: note: suggested alternative: 'strstr'
     dtostrf(INA.getBusMilliVolts(i) / 1000.0, 7, 4, busChar);      // Convert floating point to char
     ^~~~~~~
     strstr

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/src/INA.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int16_t INA_Class::readWord(uint8_t, uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/BackgroundRead

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino: In function 'void PCINT0_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:104:4: error: 'digitalPinToPCMSK' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) &= ~bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Disable PCMSK
    ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:104:4: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) &= ~bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Disable PCMSK
    ^~~~~~~~~~~~~~~~~
    digitalPinToPort
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-456C1A7038D562140C22F982B6333E09/sketch/BackgroundRead.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:104:45: error: 'digitalPinToPCMSKbit' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) &= ~bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Disable PCMSK
                                             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:104:45: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) &= ~bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Disable PCMSK
                                             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:105:3: error: 'PCICR' was not declared in this scope
   PCICR &= ~bit(digitalPinToPCICRbit(INA_ALERT_PIN));        // disable interrupt for the group
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-456C1A7038D562140C22F982B6333E09/sketch/BackgroundRead.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:105:17: error: 'digitalPinToPCICRbit' was not declared in this scope
   PCICR &= ~bit(digitalPinToPCICRbit(INA_ALERT_PIN));        // disable interrupt for the group
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:105:17: note: suggested alternative: 'digitalPinToPort'
   PCICR &= ~bit(digitalPinToPCICRbit(INA_ALERT_PIN));        // disable interrupt for the group
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:115:3: error: 'PCIFR' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:130:4: error: 'digitalPinToPCMSK' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) |= bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Enable PCMSK
    ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:130:4: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) |= bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Enable PCMSK
    ^~~~~~~~~~~~~~~~~
    digitalPinToPort
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-456C1A7038D562140C22F982B6333E09/sketch/BackgroundRead.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:130:44: error: 'digitalPinToPCMSKbit' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) |= bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Enable PCMSK
                                            ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:130:44: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) |= bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Enable PCMSK
                                            ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:131:3: error: 'PCIFR' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-456C1A7038D562140C22F982B6333E09/sketch/BackgroundRead.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:131:16: error: 'digitalPinToPCICRbit' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt
                ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:131:16: note: suggested alternative: 'digitalPinToPort'
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt
                ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:132:3: error: 'PCICR' was not declared in this scope
   PCICR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // enable interrupt for the group
   ^~~~~
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/BackgroundRead_ESP32

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead_ESP32/BackgroundRead_ESP32.ino:74:2: error: #error Example program only functions on the ESP32 / ESP8266 platforms
 #error Example program only functions on the ESP32 / ESP8266 platforms
  ^~~~~
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

examples/DataLogger

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:1: error: stray '\357' in program
 /*
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:2: error: stray '\273' in program
 /*
  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:3: error: stray '\277' in program
 /*
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino: In function 'void PCINT0_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:141:4: error: 'digitalPinToPCMSK' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) &= ~bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Disable PCMSK
    ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:141:4: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) &= ~bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Disable PCMSK
    ^~~~~~~~~~~~~~~~~
    digitalPinToPort
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-D0DC63C5ED3642AAAD069D3008FDF41A/sketch/DataLogger.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:141:45: error: 'digitalPinToPCMSKbit' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) &= ~bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Disable PCMSK
                                             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:141:45: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) &= ~bit(digitalPinToPCMSKbit(INA_ALERT_PIN));  // Disable PCMSK
                                             ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:142:3: error: 'PCICR' was not declared in this scope
   PCICR &= ~bit(digitalPinToPCICRbit(INA_ALERT_PIN));        // disable interrupt for the group
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-D0DC63C5ED3642AAAD069D3008FDF41A/sketch/DataLogger.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:142:17: error: 'digitalPinToPCICRbit' was not declared in this scope
   PCICR &= ~bit(digitalPinToPCICRbit(INA_ALERT_PIN));        // disable interrupt for the group
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:142:17: note: suggested alternative: 'digitalPinToPort'
   PCICR &= ~bit(digitalPinToPCICRbit(INA_ALERT_PIN));        // disable interrupt for the group
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:153:3: error: 'PCIFR' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:366:4: error: 'digitalPinToPCMSK' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) |=
    ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:366:4: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) |=
    ^~~~~~~~~~~~~~~~~
    digitalPinToPort
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-D0DC63C5ED3642AAAD069D3008FDF41A/sketch/DataLogger.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:367:11: error: 'digitalPinToPCMSKbit' was not declared in this scope
       bit(digitalPinToPCMSKbit(INA_ALERT_PIN));       // Enable PCMSK pin                 //
           ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:367:11: note: suggested alternative: 'digitalPinToPort'
       bit(digitalPinToPCMSKbit(INA_ALERT_PIN));       // Enable PCMSK pin                 //
           ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:3: error: 'PCIFR' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-D0DC63C5ED3642AAAD069D3008FDF41A/sketch/DataLogger.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:16: error: 'digitalPinToPCICRbit' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
                ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:16: note: suggested alternative: 'digitalPinToPort'
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
                ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:369:3: error: 'PCICR' was not declared in this scope
   PCICR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // enable interrupt for the group   //
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:404:7: error: 'class INA_Class' has no member named 'AlertOnConversion'; did you mean 'alertOnConversion'?
   INA.AlertOnConversion(true, deviceNumber);            // Make alert pin go low on finish  //
       ^~~~~~~~~~~~~~~~~
       alertOnConversion
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:418:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0;      // TCCR1A register reset            //
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:418:3: note: suggested alternative: 'TCB1'
   TCCR1A = 0;      // TCCR1A register reset            //
   ^~~~~~
   TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:419:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0;      // TCCR1B register reset            //
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:419:3

examples/DisplayReadings

Result: PASS

Sketch uses 14499 bytes (29%) of program storage space. Maximum is 49152 bytes.
Global variables use 668 bytes (10%) of dynamic memory, leaving 5476 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/src/INA.cpp:11:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'int16_t INA_Class::readWord(uint8_t, uint8_t) const':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/BackgroundRead

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:75:2: error: #error Example program only functions on Atmel AVR-Based platforms
 #error Example program only functions on Atmel AVR-Based platforms
  ^~~~~

examples/BackgroundRead_ESP32

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead_ESP32/BackgroundRead_ESP32.ino:74:2: error: #error Example program only functions on the ESP32 / ESP8266 platforms
 #error Example program only functions on the ESP32 / ESP8266 platforms
  ^~~~~

examples/DataLogger

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:1: error: stray '\357' in program
 /*
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:2: error: stray '\273' in program
 /*
  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:3: error: stray '\277' in program
 /*
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:134:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(PCINT0_vect) {
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:262:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER1_COMPA_vect) {
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:134:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(PCINT0_vect) {
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:262:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER1_COMPA_vect) {
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:366:4: error: 'digitalPinToPCMSK' was not declared in this scope
   *digitalPinToPCMSK(INA_ALERT_PIN) |=
    ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:366:4: note: suggested alternative: 'digitalPinToPort'
   *digitalPinToPCMSK(INA_ALERT_PIN) |=
    ^~~~~~~~~~~~~~~~~
    digitalPinToPort
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-D0DC63C5ED3642AAAD069D3008FDF41A/sketch/DataLogger.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:367:11: error: 'digitalPinToPCMSKbit' was not declared in this scope
       bit(digitalPinToPCMSKbit(INA_ALERT_PIN));       // Enable PCMSK pin                 //
           ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:367:11: note: suggested alternative: 'digitalPinToPort'
       bit(digitalPinToPCMSKbit(INA_ALERT_PIN));       // Enable PCMSK pin                 //
           ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:3: error: 'PCIFR' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Interrupts.h:8:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/ArduinoAPI.h:29,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:23,
                 from /tmp/arduino-sketch-D0DC63C5ED3642AAAD069D3008FDF41A/sketch/DataLogger.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:16: error: 'digitalPinToPCICRbit' was not declared in this scope
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
                ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:368:16: note: suggested alternative: 'digitalPinToPort'
   PCIFR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // clear any outstanding interrupt  //
                ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/api/Common.h:71:25: note: in definition of macro 'bit'
 #define bit(b) (1UL << (b))
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:369:3: error: 'PCICR' was not declared in this scope
   PCICR |= bit(digitalPinToPCICRbit(INA_ALERT_PIN));  // enable interrupt for the group   //
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:404:7: error: 'class INA_Class' has no member named 'AlertOnConversion'; did you mean 'alertOnConversion'?
   INA.AlertOnConversion(true, deviceNumber);            // Make alert pin go low on finish  //
       ^~~~~~~~~~~~~~~~~
       alertOnConversion
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:417:3: error: 'cli' was not declared in this scope
   cli();           // disable interrupts while setting //
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:417:3: note: suggested alternative: 'Gclk'
   cli();           // disable interrupts while setting //
   ^~~
   Gclk
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:418:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = 0;      // TCCR1A register reset            //
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:418:3: note: suggested alternative: 'TCC1'
   TCCR1A = 0;      // TCCR1A register reset            //
   ^~~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:419:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0;      // TCCR1B register reset            //
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:419:3: note: suggested alternative: 'TCC1'
   TCCR1B = 0;      // TCCR1B register reset            //
   ^~~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:420:3: error: 'TCNT1' was not declared in this scope
   TCNT1  = 0;      // initialize counter               //
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:420:3: note: suggested alternative: 'TCC1'
   TCNT1  = 0;      // initialize counter               //
   ^~~~~
   TCC1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:421:3: error: 'OCR1A' was not declared in this scope
   OCR1A  = 15624;  // ((16*10^6) / (1*1024)) - 1       //
   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:422:19: error: 'WGM12' was not declared in this scope
   TCCR1B |= (1 << WGM12);               // Enable CTC mode                  //
                   ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:423:19: error: 'CS12' was not declared in this scope
   TCCR1B |= (1 << CS12) | (1 << CS10);  // CS10 & CS12 for 1024 prescaler   //
                   ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:423:19: note: suggested alternative: 'SS1'
   TCCR1B |= (1 << CS12) | (1 << CS10);  // CS10 & CS12 for 1024 prescaler   //
                   ^~~~
                   SS1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:423:33: error: 'CS10' was not declared in this scope
   TCCR1B |= (1 << CS12) | (1 << CS10);  // CS10 & CS12 for 1024 prescaler   //
                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:423:33: note: suggested alternative: 'SS1'
   TCCR1B |= (1 << CS12) | (1 << CS10);  // CS10 & CS12 for 1024 prescaler   //
                                 ^~~~
                                 SS1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:424:3: error: 'TIMSK1' was not declared in this scope
   TIMSK1 |= (1 << OCIE1A);              // Enable timer compare interrupt   //
   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:424:3: note: suggested alternative: 'MISO1'
   TIMSK1 |= (1 << OCIE1A);              // Enable timer compare interrupt   //
   ^~~~~~
   MISO1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:424:19: error: 'OCIE1A' was not declared in this scope
   TIMSK1 |= (1 << OCIE1A);              // Enable timer compare interrupt   //
                   ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:425:3: error: 'sei' was not declared in this scope
   sei();

examples/DisplayReadings

Result: PASS

Sketch uses 35972 bytes (13%) of program storage space. Maximum is 262144 bytes.
Global variables use 4380 bytes (13%) of dynamic memory, leaving 28388 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 207498 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13928 bytes (4%) of dynamic memory, leaving 313752 bytes for local variables. Maximum is 327680 bytes.

examples/BackgroundRead

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/BackgroundRead/BackgroundRead.ino:75:2: error: #error Example program only functions on Atmel AVR-Based platforms
 #error Example program only functions on Atmel AVR-Based platforms
  ^
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/BackgroundRead_ESP32

Result: PASS

Sketch uses 228894 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14800 bytes (4%) of dynamic memory, leaving 312880 bytes for local variables. Maximum is 327680 bytes.

examples/DataLogger

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:1: error: stray '\357' in program
 /*
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:1: error: stray '\273' in program
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:1:1: error: stray '\277' in program
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:134:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(PCINT0_vect) {
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:262:5: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER1_COMPA_vect) {
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:134:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(PCINT0_vect) {
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/INA2xx/examples/DataLogger/DataLogger.ino:262:4: error: expected constructor, destructor, or type conversion before '(' token
 ISR(TIMER1_COMPA_vect) {
    ^
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/DisplayReadings

Result: PASS

Sketch uses 227106 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14368 bytes (4%) of dynamic memory, leaving 313312 bytes for local variables. Maximum is 327680 bytes.