Indio - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Indio

Version: 1.2.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Indio_AnalogCalibration	Indio_AnalogIn	Indio_AnalogOut	Indio_Digital
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 2522 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 297 bytes (14%) of dynamic memory, leaving 1751 bytes for local variables. Maximum is 2048 bytes.

examples/Indio_AnalogCalibration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:87:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:87:3: note: suggested alternative: 'Serial'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:98:16: error: 'SerialUSB' was not declared in this scope
   int option = SerialUSB.parseInt();
                ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:98:16: note: suggested alternative: 'Serial'
   int option = SerialUSB.parseInt();
                ^~~~~~~~~
                Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void ADC_voltage()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:125:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println(F("ADC calibration voltage mode: 0-10V"));
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:125:3: note: suggested alternative: 'Serial'
   SerialUSB.println(F("ADC calibration voltage mode: 0-10V"));
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void ADC_current()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:194:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println(F("ADC calibration current mode: 4-20mA"));
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:194:3: note: suggested alternative: 'Serial'
   SerialUSB.println(F("ADC calibration current mode: 4-20mA"));
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void DAC_voltage()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:278:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println(F("DAC calibration voltage mode: 0-10V"));
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:278:3: note: suggested alternative: 'Serial'
   SerialUSB.println(F("DAC calibration voltage mode: 0-10V"));
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void DAC_current()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:351:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println(F("DAC calibration current mode: 4-20mA"));
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:351:3: note: suggested alternative: 'Serial'
   SerialUSB.println(F("DAC calibration current mode: 4-20mA"));
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void serialMenu()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:535:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println();
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:535:3: note: suggested alternative: 'Serial'
   SerialUSB.println();
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'int getSerialInt(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:558:12: error: 'SerialUSB' was not declared in this scope
     while (SerialUSB.available() == 0) { }
            ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:558:12: note: suggested alternative: 'Serial'
     while (SerialUSB.available() == 0) { }
            ^~~~~~~~~
            Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:559:14: error: 'SerialUSB' was not declared in this scope
     number = SerialUSB.parseInt();
              ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:559:14: note: suggested alternative: 'Serial'
     number = SerialUSB.parseInt();
              ^~~~~~~~~
              Serial

examples/Indio_AnalogIn

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:23:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:23:3: note: suggested alternative: 'Serial'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:46:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.print("CH1: "); //Print "CH" for human readability
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:46:3: note: suggested alternative: 'Serial'
   SerialUSB.print("CH1: "); //Print "CH" for human readability
   ^~~~~~~~~
   Serial

examples/Indio_AnalogOut

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogOut/Indio_AnalogOut.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogOut/Indio_AnalogOut.ino:20:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogOut/Indio_AnalogOut.ino:20:3: note: suggested alternative: 'Serial'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial

examples/Indio_Digital

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_Digital/Indio_Digital.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_Digital/Indio_Digital.ino:33:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.print(Indio.digitalRead(1),BIN); // Read CH1 one, print state to SerialUSB.
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_Digital/Indio_Digital.ino:33:3: note: suggested alternative: 'Serial'
   SerialUSB.print(Indio.digitalRead(1),BIN); // Read CH1 one, print state to SerialUSB.
   ^~~~~~~~~
   Serial

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81722 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44376 bytes (16%) of dynamic memory, leaving 225960 bytes for local variables. Maximum is 270336 bytes.

examples/Indio_AnalogCalibration

Result: PASS

Sketch uses 92514 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44716 bytes (16%) of dynamic memory, leaving 225620 bytes for local variables. Maximum is 270336 bytes.

examples/Indio_AnalogIn

Result: PASS

Sketch uses 86354 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44392 bytes (16%) of dynamic memory, leaving 225944 bytes for local variables. Maximum is 270336 bytes.

examples/Indio_AnalogOut

Result: PASS

Sketch uses 83480 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44376 bytes (16%) of dynamic memory, leaving 225960 bytes for local variables. Maximum is 270336 bytes.

examples/Indio_Digital

Result: PASS

Sketch uses 82882 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44376 bytes (16%) of dynamic memory, leaving 225960 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 4640 bytes (9%) of program storage space. Maximum is 49152 bytes.
Global variables use 472 bytes (7%) of dynamic memory, leaving 5672 bytes for local variables. Maximum is 6144 bytes.

examples/Indio_AnalogCalibration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:87:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:87:3: note: suggested alternative: 'Serial1'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:98:16: error: 'SerialUSB' was not declared in this scope
   int option = SerialUSB.parseInt();
                ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:98:16: note: suggested alternative: 'Serial1'
   int option = SerialUSB.parseInt();
                ^~~~~~~~~
                Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void ADC_voltage()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:125:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println(F("ADC calibration voltage mode: 0-10V"));
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:125:3: note: suggested alternative: 'Serial1'
   SerialUSB.println(F("ADC calibration voltage mode: 0-10V"));
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void ADC_current()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:194:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println(F("ADC calibration current mode: 4-20mA"));
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:194:3: note: suggested alternative: 'Serial1'
   SerialUSB.println(F("ADC calibration current mode: 4-20mA"));
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void DAC_voltage()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:278:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println(F("DAC calibration voltage mode: 0-10V"));
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:278:3: note: suggested alternative: 'Serial1'
   SerialUSB.println(F("DAC calibration voltage mode: 0-10V"));
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void DAC_current()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:351:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println(F("DAC calibration current mode: 4-20mA"));
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:351:3: note: suggested alternative: 'Serial1'
   SerialUSB.println(F("DAC calibration current mode: 4-20mA"));
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'void serialMenu()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:535:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.println();
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:535:3: note: suggested alternative: 'Serial1'
   SerialUSB.println();
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino: In function 'int getSerialInt(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:558:12: error: 'SerialUSB' was not declared in this scope
     while (SerialUSB.available() == 0) { }
            ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:558:12: note: suggested alternative: 'Serial1'
     while (SerialUSB.available() == 0) { }
            ^~~~~~~~~
            Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:559:14: error: 'SerialUSB' was not declared in this scope
     number = SerialUSB.parseInt();
              ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogCalibration/Indio_AnalogCalibration.ino:559:14: note: suggested alternative: 'Serial1'
     number = SerialUSB.parseInt();
              ^~~~~~~~~
              Serial1

examples/Indio_AnalogIn

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:23:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:23:3: note: suggested alternative: 'Serial1'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:46:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.print("CH1: "); //Print "CH" for human readability
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:46:3: note: suggested alternative: 'Serial1'
   SerialUSB.print("CH1: "); //Print "CH" for human readability
   ^~~~~~~~~
   Serial1

examples/Indio_AnalogOut

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogOut/Indio_AnalogOut.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogOut/Indio_AnalogOut.ino:20:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogOut/Indio_AnalogOut.ino:20:3: note: suggested alternative: 'Serial1'
   SerialUSB.begin(9600);
   ^~~~~~~~~
   Serial1

examples/Indio_Digital

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_Digital/Indio_Digital.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_Digital/Indio_Digital.ino:33:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.print(Indio.digitalRead(1),BIN); // Read CH1 one, print state to SerialUSB.
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_Digital/Indio_Digital.ino:33:3: note: suggested alternative: 'Serial1'
   SerialUSB.print(Indio.digitalRead(1),BIN); // Read CH1 one, print state to SerialUSB.
   ^~~~~~~~~
   Serial1

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13596 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.

examples/Indio_AnalogCalibration

Result: PASS

Sketch uses 31772 bytes (12%) of program storage space. Maximum is 262144 bytes.
Global variables use 4100 bytes (12%) of dynamic memory, leaving 28668 bytes for local variables. Maximum is 32768 bytes.

examples/Indio_AnalogIn

Result: PASS

Sketch uses 26648 bytes (10%) of program storage space. Maximum is 262144 bytes.
Global variables use 3740 bytes (11%) of dynamic memory, leaving 29028 bytes for local variables. Maximum is 32768 bytes.

examples/Indio_AnalogOut

Result: PASS

Sketch uses 19060 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.

examples/Indio_Digital

Result: PASS

Sketch uses 14904 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3724 bytes (11%) of dynamic memory, leaving 29044 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 204602 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14120 bytes (4%) of dynamic memory, leaving 313560 bytes for local variables. Maximum is 327680 bytes.

examples/Indio_AnalogCalibration

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/UC1701/src/UC1701.cpp:34:26: fatal error: avr/pgmspace.h: No such file or directory
compilation terminated.

examples/Indio_AnalogIn

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:23:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600); 
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogIn/Indio_AnalogIn.ino:46:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.print("CH1: "); //Print "CH" for human readability
   ^

examples/Indio_AnalogOut

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogOut/Indio_AnalogOut.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_AnalogOut/Indio_AnalogOut.ino:20:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.begin(9600); 
   ^

examples/Indio_Digital

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_Digital/Indio_Digital.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Indio/examples/Indio_Digital/Indio_Digital.ino:33:3: error: 'SerialUSB' was not declared in this scope
   SerialUSB.print(Indio.digitalRead(1),BIN); // Read CH1 one, print state to SerialUSB.
   ^