This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.4.2
More details
| Board | Claims compatibility | Inclusion | InkyBoard_06_rgbLed |
InkyBoard_10_display_image |
InkyBoard_07_colorSensor |
InkyBoard_08_display_showNumbers |
InkyBoard_14_demo |
InkyBoard_00_functielijst |
InkyBoard_09_display_pixel |
InkyBoard_12_game_snake |
InkyBoard_13_game_simon_says |
InkyBoard_05_potmeter |
InkyBoard_11_multipe_displays |
InkyBoard_01_blink |
InkyBoard_02_button |
InkyBoard_03_knock |
InkyBoard_04_servo |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes ⚠️ | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | PASS | FAIL | PASS | PASS | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:24:0,
from /tmp/arduino-testlib3432589465/test/test.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:200:7: error: redefinition of 'class Display'
class Display{
^~~~~~~
In file included from /tmp/arduino-testlib3432589465/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu/src/Display.h:4:7: note: previous definition of 'class Display'
class Display {
^~~~~~~
In file included from /tmp/arduino-testlib3432589465/test/test.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:173:13: error: cannot declare field 'InkyBoard::display' to be of abstract type 'Display'
Display display;
^~~~~~~
In file included from /tmp/arduino-testlib3432589465/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu/src/Display.h:4:7: note: because the following virtual functions are pure within 'Display':
class Display {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu/src/Display.h:6:16: note: virtual void Display::begin()
virtual void begin(void) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu/src/Display.h:7:16: note: virtual void Display::write(char)
virtual void write(char) = 0;
^~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Result: PASS
Sketch uses 5124 bytes (15%) of program storage space. Maximum is 32256 bytes. Global variables use 501 bytes (24%) of dynamic memory, leaving 1547 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5190 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 509 bytes (24%) of dynamic memory, leaving 1539 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5344 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 509 bytes (24%) of dynamic memory, leaving 1539 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5564 bytes (17%) of program storage space. Maximum is 32256 bytes. Global variables use 527 bytes (25%) of dynamic memory, leaving 1521 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6144 bytes (19%) of program storage space. Maximum is 32256 bytes. Global variables use 509 bytes (24%) of dynamic memory, leaving 1539 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5700 bytes (17%) of program storage space. Maximum is 32256 bytes. Global variables use 515 bytes (25%) of dynamic memory, leaving 1533 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5744 bytes (17%) of program storage space. Maximum is 32256 bytes. Global variables use 516 bytes (25%) of dynamic memory, leaving 1532 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7118 bytes (22%) of program storage space. Maximum is 32256 bytes. Global variables use 531 bytes (25%) of dynamic memory, leaving 1517 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5650 bytes (17%) of program storage space. Maximum is 32256 bytes. Global variables use 581 bytes (28%) of dynamic memory, leaving 1467 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 5288 bytes (16%) of program storage space. Maximum is 32256 bytes. Global variables use 501 bytes (24%) of dynamic memory, leaving 1547 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6168 bytes (19%) of program storage space. Maximum is 32256 bytes. Global variables use 517 bytes (25%) of dynamic memory, leaving 1531 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:62:54: error: invalid cast to abstract class type 'Display'
Display display = Display(DIN, CLK, LOAD, deviceCount); // init the display
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu/src/Display.h:4:7: note: because the following virtual functions are pure within 'Display':
class Display {
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu/src/Display.h:6:16: note: virtual void Display::begin()
virtual void begin(void) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu/src/Display.h:7:16: note: virtual void Display::write(char)
virtual void write(char) = 0;
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:62:9: error: cannot declare variable 'display' to be of abstract type 'Display'
Display display = Display(DIN, CLK, LOAD, deviceCount); // init the display
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:72:13: error: 'class Display' has no member named 'changeDevice'
display.changeDevice(i).init(false);
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:74:11: error: 'class Display' has no member named 'setAutoSend'
display.setAutoSend(false); // don't send after each command but buildup all displays and send in one go
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:86:13: error: 'class Display' has no member named 'd'
display.d(0).number(time.hours / 10); // display.d() is the same as display.changeDevice()
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:87:13: error: 'class Display' has no member named 'd'
display.d(1).number(time.hours % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:88:13: error: 'class Display' has no member named 'd'
display.d(3).number(time.minutes / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:89:13: error: 'class Display' has no member named 'd'
display.d(4).number(time.minutes % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:90:13: error: 'class Display' has no member named 'd'
display.d(2).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:93:15: error: 'class Display' has no member named 'd'
display.d(6).number(time.seconds / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:94:15: error: 'class Display' has no member named 'd'
display.d(7).number(time.seconds % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:95:15: error: 'class Display' has no member named 'd'
display.d(5).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:15: error: 'class Display' has no member named 'd'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:35: error: 'class Display' has no member named 'ROTATE_90'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:103:13: error: 'class Display' has no member named 'send'
display.send();
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:106:13: error: 'class Display' has no member named 'd'
display.d(2).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:108:15: error: 'class Display' has no member named 'd'
display.d(5).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:111:13: error: 'class Display' has no member named 'send'
display.send();
^~~~
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Result: PASS
Sketch uses 8648 bytes (26%) of program storage space. Maximum is 32256 bytes. Global variables use 887 bytes (43%) of dynamic memory, leaving 1161 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 6684 bytes (20%) of program storage space. Maximum is 32256 bytes. Global variables use 611 bytes (29%) of dynamic memory, leaving 1437 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 7672 bytes (23%) of program storage space. Maximum is 32256 bytes. Global variables use 564 bytes (27%) of dynamic memory, leaving 1484 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-6A217FBC51D04FCBF0D945350FCF6FE8/sketch/test.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:24:0,
from /tmp/arduino-testlib2433964280/test/test.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:200:7: error: redefinition of 'class Display'
class Display{
^~~~~~~
In file included from /tmp/arduino-testlib2433964280/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: previous definition of 'class Display'
class Display
^~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-5F1C069E2635E7D594D238862287CB9C/sketch/InkyBoard_00_functielijst.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-C43BC6CD1DFD2688C60A27176F150349/sketch/InkyBoard_01_blink.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-4548F595E08586F2F8AD7C63A5ACE084/sketch/InkyBoard_02_button.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-1418DB029BB1623BE94130B3CF23F887/sketch/InkyBoard_03_knock.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-5B3AF637C1DD61E77443DCC85E8C43BF/sketch/InkyBoard_04_servo.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-7454713E02C61ACC8E6A5A2CFEC518D5/sketch/InkyBoard_05_potmeter.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-2D775DB18577B77A4094BA8E79FC447D/sketch/InkyBoard_06_rgbLed.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-20FBE4488A35EDDBDDB1CB80816CCE15/sketch/InkyBoard_07_colorSensor.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-166549FAB6130AE89FA46DDC655D3B9B/sketch/InkyBoard_08_display_showNumbers.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-09B4E023620936C37710D9B99363FB91/sketch/InkyBoard_09_display_pixel.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-89ACC8F25234DCAFEE99EE75332C4FE4/sketch/InkyBoard_10_display_image.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:62:54: error: no matching function for call to 'Display::Display(const int&, const int&, const int&, const int&)'
Display display = Display(DIN, CLK, LOAD, deviceCount); // init the display
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: Display::Display()
class Display
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 0 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: constexpr Display::Display(const Display&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: constexpr Display::Display(Display&&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:63:6: error: 'Time time' redeclared as different kind of symbol
Time time = Time(); // init timekeeping
^~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/stdlib.h:11:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/cstdlib:75,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/stdlib.h:36,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/Interrupts.h:5,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/api/ArduinoAPI.h:29,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:27,
from /tmp/arduino-sketch-8479CCE584176BFC17EE22A4BA9F9A36/sketch/InkyBoard_11_multipe_displays.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/time.h:59:11: note: previous declaration 'time_t time(time_t*)'
time_t _EXFUN(time, (time_t *_timer));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:72:13: error: 'class Display' has no member named 'changeDevice'
display.changeDevice(i).init(false);
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:74:11: error: 'class Display' has no member named 'setAutoSend'
display.setAutoSend(false); // don't send after each command but buildup all displays and send in one go
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:85:10: error: request for member 'calculate' in 'time', which is of non-class type 'time_t(time_t*) {aka long long int(long long int*)}'
time.calculate(); // calculate the time
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:86:13: error: 'class Display' has no member named 'd'
display.d(0).number(time.hours / 10); // display.d() is the same as display.changeDevice()
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:86:30: error: request for member 'hours' in 'time', which is of non-class type 'time_t(time_t*) {aka long long int(long long int*)}'
display.d(0).number(time.hours / 10); // display.d() is the same as display.changeDevice()
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:87:13: error: 'class Display' has no member named 'd'
display.d(1).number(time.hours % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:87:30: error: request for member 'hours' in 'time', which is of non-class type 'time_t(time_t*) {aka long long int(long long int*)}'
display.d(1).number(time.hours % 10);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:88:13: error: 'class Display' has no member named 'd'
display.d(3).number(time.minutes / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:88:30: error: request for member 'minutes' in 'time', which is of non-class type 'time_t(time_t*) {aka long long int(long long int*)}'
display.d(3).number(time.minutes / 10);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:89:13: error: 'class Display' has no member named 'd'
display.d(4).number(time.minutes % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:89:30: error: request for member 'minutes' in 'time', which is of non-class type 'time_t(time_t*) {aka long long int(long long int*)}'
display.d(4).number(time.minutes % 10);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:90:13: error: 'class Display' has no member named 'd'
display.d(2).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:93:15: error: 'class Display' has no member named 'd'
display.d(6).number(time.seconds / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:93:32: error: request for member 'seconds' in 'time', which is of non-class type 'time_t(time_t*) {aka long long int(long long int*)}'
display.d(6).number(time.seconds / 10);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:94:15: error: 'class Display' has no member named 'd'
display.d(7).number(time.seconds % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:94:32: error: request for member 'seconds' in 'time', which is of non-class type 'time_t(time_t*) {aka long long int(long long int*)}'
display.d(7).number(time.seconds % 10);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:95:15: error: 'class Display' has no member named 'd'
display.d(5).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:15: error: 'class Display' has no member named 'd'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:35: error: 'class Display' has no member named 'ROTATE_90'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:103:13: error: 'class Display' has no member named 'send'
display.send();
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:106:13: error: 'class Display' has no member named 'd'
display.d(2).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:108:15: error: 'class Display' has no member named 'd'
display.d(5).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:111:13: er
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-473C55CEFB8F3A1F86703184394C0728/sketch/InkyBoard_12_game_snake.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-C3132C76CCE050117E9B760703DCC143/sketch/InkyBoard_13_game_simon_says.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76:0,
from /tmp/arduino-sketch-84CF80FEE5D467EFDF1E2DB4AFB336D1/sketch/InkyBoard_14_demo.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:23: error: expected identifier before '(' token
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:57:24: error: expected ')' before numeric constant
#define PIN_SPI_MOSI (11u)
^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:91:40: note: in expansion of macro 'PIN_SPI_MOSI'
#define SPI_MOSI (digitalPinToPinName(PIN_SPI_MOSI))
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:69:13: note: in expansion of macro 'SPI_MOSI'
int SPI_MOSI;
^~~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:24:0,
from /tmp/arduino-testlib2433964280/test/test.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:200:7: error: redefinition of 'class Display'
class Display{
^~~~~~~
In file included from /tmp/arduino-testlib2433964280/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: previous definition of 'class Display'
class Display
^~~~~~~
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6230 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 456 bytes (7%) of dynamic memory, leaving 5688 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6308 bytes (12%) of program storage space. Maximum is 49152 bytes. Global variables use 464 bytes (7%) of dynamic memory, leaving 5680 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6448 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 464 bytes (7%) of dynamic memory, leaving 5680 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6723 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 478 bytes (7%) of dynamic memory, leaving 5666 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 7121 bytes (14%) of program storage space. Maximum is 49152 bytes. Global variables use 460 bytes (7%) of dynamic memory, leaving 5684 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6741 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 466 bytes (7%) of dynamic memory, leaving 5678 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6873 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 467 bytes (7%) of dynamic memory, leaving 5677 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 8037 bytes (16%) of program storage space. Maximum is 49152 bytes. Global variables use 482 bytes (7%) of dynamic memory, leaving 5662 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6714 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 456 bytes (7%) of dynamic memory, leaving 5688 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 6394 bytes (13%) of program storage space. Maximum is 49152 bytes. Global variables use 456 bytes (7%) of dynamic memory, leaving 5688 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 7099 bytes (14%) of program storage space. Maximum is 49152 bytes. Global variables use 460 bytes (7%) of dynamic memory, leaving 5684 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:62:54: error: no matching function for call to 'Display::Display(const int&, const int&, const int&, const int&)'
Display display = Display(DIN, CLK, LOAD, deviceCount); // init the display
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: Display::Display()
class Display
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 0 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: constexpr Display::Display(const Display&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: constexpr Display::Display(Display&&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:72:13: error: 'class Display' has no member named 'changeDevice'
display.changeDevice(i).init(false);
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:74:11: error: 'class Display' has no member named 'setAutoSend'
display.setAutoSend(false); // don't send after each command but buildup all displays and send in one go
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:86:13: error: 'class Display' has no member named 'd'
display.d(0).number(time.hours / 10); // display.d() is the same as display.changeDevice()
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:87:13: error: 'class Display' has no member named 'd'
display.d(1).number(time.hours % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:88:13: error: 'class Display' has no member named 'd'
display.d(3).number(time.minutes / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:89:13: error: 'class Display' has no member named 'd'
display.d(4).number(time.minutes % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:90:13: error: 'class Display' has no member named 'd'
display.d(2).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:93:15: error: 'class Display' has no member named 'd'
display.d(6).number(time.seconds / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:94:15: error: 'class Display' has no member named 'd'
display.d(7).number(time.seconds % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:95:15: error: 'class Display' has no member named 'd'
display.d(5).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:15: error: 'class Display' has no member named 'd'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:35: error: 'class Display' has no member named 'ROTATE_90'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:103:13: error: 'class Display' has no member named 'send'
display.send();
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:106:13: error: 'class Display' has no member named 'd'
display.d(2).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:108:15: error: 'class Display' has no member named 'd'
display.d(5).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:111:13: error: 'class Display' has no member named 'send'
display.send();
^~~~
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 9467 bytes (19%) of program storage space. Maximum is 49152 bytes. Global variables use 750 bytes (12%) of dynamic memory, leaving 5394 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 7665 bytes (15%) of program storage space. Maximum is 49152 bytes. Global variables use 504 bytes (8%) of dynamic memory, leaving 5640 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 8581 bytes (17%) of program storage space. Maximum is 49152 bytes. Global variables use 507 bytes (8%) of dynamic memory, leaving 5637 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:24:0,
from /tmp/arduino-testlib3432589465/test/test.ino:3:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/Display.h:200:7: error: redefinition of 'class Display'
class Display{
^~~~~~~
In file included from /tmp/arduino-testlib3432589465/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: previous definition of 'class Display'
class Display
^~~~~~~
In file included from /tmp/arduino-testlib3432589465/test/test.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_00_functielijst/InkyBoard_00_functielijst.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_00_functielijst/InkyBoard_00_functielijst.ino:114:20: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_00_functielijst/InkyBoard_00_functielijst.ino:114:20: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_01_blink/InkyBoard_01_blink.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_02_button/InkyBoard_02_button.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_03_knock/InkyBoard_03_knock.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_04_servo/InkyBoard_04_servo.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_05_potmeter/InkyBoard_05_potmeter.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_06_rgbLed/InkyBoard_06_rgbLed.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_07_colorSensor/InkyBoard_07_colorSensor.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_08_display_showNumbers/InkyBoard_08_display_showNumbers.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_09_display_pixel/InkyBoard_09_display_pixel.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_10_display_image/InkyBoard_10_display_image.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:62:54: error: no matching function for call to 'Display::Display(const int&, const int&, const int&, const int&)'
Display display = Display(DIN, CLK, LOAD, deviceCount); // init the display
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: Display::Display()
class Display
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 0 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: constexpr Display::Display(const Display&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: constexpr Display::Display(Display&&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:72:13: error: 'class Display' has no member named 'changeDevice'
display.changeDevice(i).init(false);
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:74:11: error: 'class Display' has no member named 'setAutoSend'
display.setAutoSend(false); // don't send after each command but buildup all displays and send in one go
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:86:13: error: 'class Display' has no member named 'd'
display.d(0).number(time.hours / 10); // display.d() is the same as display.changeDevice()
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:87:13: error: 'class Display' has no member named 'd'
display.d(1).number(time.hours % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:88:13: error: 'class Display' has no member named 'd'
display.d(3).number(time.minutes / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:89:13: error: 'class Display' has no member named 'd'
display.d(4).number(time.minutes % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:90:13: error: 'class Display' has no member named 'd'
display.d(2).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:93:15: error: 'class Display' has no member named 'd'
display.d(6).number(time.seconds / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:94:15: error: 'class Display' has no member named 'd'
display.d(7).number(time.seconds % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:95:15: error: 'class Display' has no member named 'd'
display.d(5).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:15: error: 'class Display' has no member named 'd'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:35: error: 'class Display' has no member named 'ROTATE_90'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:103:13: error: 'class Display' has no member named 'send'
display.send();
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:106:13: error: 'class Display' has no member named 'd'
display.d(2).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:108:15: error: 'class Display' has no member named 'd'
display.d(5).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:111:13: error: 'class Display' has no member named 'send'
display.send();
^~~~
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_12_game_snake/InkyBoard_12_game_snake.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_13_game_simon_says/InkyBoard_13_game_simon_says.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Result: FAIL
WARNING: library InkyBoard claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_14_demo/InkyBoard_14_demo.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: error: 'A7' was not declared in this scope
const int pKnock = A7;
^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:148:24: note: suggested alternative: 'A6'
const int pKnock = A7;
^~
A6
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Result: FAIL
In file included from /tmp/arduino-testlib1773617658/test/test.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_00_functielijst/InkyBoard_00_functielijst.ino:10:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_01_blink/InkyBoard_01_blink.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_02_button/InkyBoard_02_button.ino:9:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_03_knock/InkyBoard_03_knock.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_04_servo/InkyBoard_04_servo.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_05_potmeter/InkyBoard_05_potmeter.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_06_rgbLed/InkyBoard_06_rgbLed.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_07_colorSensor/InkyBoard_07_colorSensor.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_08_display_showNumbers/InkyBoard_08_display_showNumbers.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_09_display_pixel/InkyBoard_09_display_pixel.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_10_display_image/InkyBoard_10_display_image.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:62:54: error: no matching function for call to 'Display::Display(const int&, const int&, const int&, const int&)'
Display display = Display(DIN, CLK, LOAD, deviceCount); // init the display
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:4:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: Display::Display()
class Display
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 0 arguments, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: constexpr Display::Display(const Display&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate: constexpr Display::Display(Display&&)
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX/src/Display.h:9:7: note: candidate expects 1 argument, 4 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:63:6: error: 'Time time' redeclared as different kind of symbol
Time time = Time(); // init timekeeping
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib/stdio.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:27,
from /tmp/arduino-sketch-8479CCE584176BFC17EE22A4BA9F9A36/sketch/InkyBoard_11_multipe_displays.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib/time.h:53:11: note: previous declaration 'time_t time(time_t*)'
time_t _EXFUN(time, (time_t *_timer));
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:72:13: error: 'class Display' has no member named 'changeDevice'
display.changeDevice(i).init(false);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:74:11: error: 'class Display' has no member named 'setAutoSend'
display.setAutoSend(false); // don't send after each command but buildup all displays and send in one go
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:85:10: error: request for member 'calculate' in 'time', which is of non-class type 'time_t(time_t*) {aka long int(long int*)}'
time.calculate(); // calculate the time
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:86:13: error: 'class Display' has no member named 'd'
display.d(0).number(time.hours / 10); // display.d() is the same as display.changeDevice()
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:86:30: error: request for member 'hours' in 'time', which is of non-class type 'time_t(time_t*) {aka long int(long int*)}'
display.d(0).number(time.hours / 10); // display.d() is the same as display.changeDevice()
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:87:13: error: 'class Display' has no member named 'd'
display.d(1).number(time.hours % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:87:30: error: request for member 'hours' in 'time', which is of non-class type 'time_t(time_t*) {aka long int(long int*)}'
display.d(1).number(time.hours % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:88:13: error: 'class Display' has no member named 'd'
display.d(3).number(time.minutes / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:88:30: error: request for member 'minutes' in 'time', which is of non-class type 'time_t(time_t*) {aka long int(long int*)}'
display.d(3).number(time.minutes / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:89:13: error: 'class Display' has no member named 'd'
display.d(4).number(time.minutes % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:89:30: error: request for member 'minutes' in 'time', which is of non-class type 'time_t(time_t*) {aka long int(long int*)}'
display.d(4).number(time.minutes % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:90:13: error: 'class Display' has no member named 'd'
display.d(2).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:93:15: error: 'class Display' has no member named 'd'
display.d(6).number(time.seconds / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:93:32: error: request for member 'seconds' in 'time', which is of non-class type 'time_t(time_t*) {aka long int(long int*)}'
display.d(6).number(time.seconds / 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:94:15: error: 'class Display' has no member named 'd'
display.d(7).number(time.seconds % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:94:32: error: request for member 'seconds' in 'time', which is of non-class type 'time_t(time_t*) {aka long int(long int*)}'
display.d(7).number(time.seconds % 10);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:95:15: error: 'class Display' has no member named 'd'
display.d(5).image(dots);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:15: error: 'class Display' has no member named 'd'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:99:35: error: 'class Display' has no member named 'ROTATE_90'
display.d(i).rotate(display.ROTATE_90); // rotate the displays
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:103:13: error: 'class Display' has no member named 'send'
display.send();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:106:13: error: 'class Display' has no member named 'd'
display.d(2).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:108:15: error: 'class Display' has no member named 'd'
display.d(5).clear();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_11_multipe_displays/InkyBoard_11_multipe_displays.ino:111:13: error: 'class Display' has no member named 'send'
display.send();
^
Multiple libraries were found for "Display.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grafici-GFX
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/OneSystemLibrary
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/AceMenu
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_12_game_snake/InkyBoard_12_game_snake.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_13_game_simon_says/InkyBoard_13_game_simon_says.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/examples/InkyBoard_14_demo/InkyBoard_14_demo.ino:6:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/InkyBoard/src/InkyBoard.h:22:26: fatal error: avr/pgmspace.h: No such file or directory
#include <avr/pgmspace.h>
^
compilation terminated.
Multiple libraries were found for "Servo.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ServoESP32
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/evive
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/RokitSmart
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/XMC_Servo
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Printoo_Library