This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.3.1
More details
| Board | Claims compatibility | Inclusion | 06_ws2812_push_color |
07_smart_room |
01_device_connection |
02_send_measurement |
03_mqtt_send_and_callback |
04_ota_firmware_update |
05_mqtt_relay_android |
|---|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | PASS | FAIL | PASS | PASS | PASS | PASS | PASS |
Result: FAIL
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-160F44CD1184B28FB84CC38700DBE29A/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:44:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:45:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:45:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-D6D3D285202B313FB376DD0E4E0DE356/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-2DC0A7421550243875A24E1801C8C5FD/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-FDB26E6650CB597A69C7348396CF0C05/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-CAF4E2D494EFC43A623EF1AE03CB150F/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated. Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/01_device_connection/01_device_connection.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/01_device_connection/01_device_connection.ino:41:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/01_device_connection/01_device_connection.ino:42:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/01_device_connection/01_device_connection.ino:42:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:44:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:45:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:45:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:37:1: error: 'WiFiClient' does not name a type; did you mean 'MqttClient'?
WiFiClient client;
^~~~~~~~~~
MqttClient
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:51:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:52:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:52:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:69:31: error: 'client' was not declared in this scope
iotGuru.setNetworkClient(&client);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:69:31: note: suggested alternative: 'dirent'
iotGuru.setNetworkClient(&client);
^~~~~~
dirent
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:47:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:48:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:48:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:71:9: error: 'ESP' was not declared in this scope
ESP.restart();
^~~
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:36:1: error: 'WiFiClient' does not name a type; did you mean 'MqttClient'?
WiFiClient client;
^~~~~~~~~~
MqttClient
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:56:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:57:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:57:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:79:31: error: 'client' was not declared in this scope
iotGuru.setNetworkClient(&client);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:79:31: note: suggested alternative: 'dirent'
iotGuru.setNetworkClient(&client);
^~~~~~
dirent
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:28:1: error: 'WiFiClient' does not name a type; did you mean 'MqttClient'?
WiFiClient client;
^~~~~~~~~~
MqttClient
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:62:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:63:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:63:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:80:31: error: 'client' was not declared in this scope
iotGuru.setNetworkClient(&client);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:80:31: note: suggested alternative: 'dirent'
iotGuru.setNetworkClient(&client);
^~~~~~
dirent
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/07_smart_room/07_smart_room.ino:53:10: fatal error: BME280_MOD-1022.h: No such file or directory
#include <BME280_MOD-1022.h>
^~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/01_device_connection/01_device_connection.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/01_device_connection/01_device_connection.ino:41:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/01_device_connection/01_device_connection.ino:42:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/01_device_connection/01_device_connection.ino:42:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:44:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:45:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/02_send_measurement/02_send_measurement.ino:45:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:37:1: error: 'WiFiClient' does not name a type; did you mean 'MqttClient'?
WiFiClient client;
^~~~~~~~~~
MqttClient
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:51:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:52:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:52:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:69:31: error: 'client' was not declared in this scope
iotGuru.setNetworkClient(&client);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/03_mqtt_send_and_callback/03_mqtt_send_and_callback.ino:69:31: note: suggested alternative: 'lrint'
iotGuru.setNetworkClient(&client);
^~~~~~
lrint
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:47:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:48:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:48:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:71:9: error: 'ESP' was not declared in this scope
ESP.restart();
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/04_ota_firmware_update/04_ota_firmware_update.ino:71:9: note: suggested alternative: 'SP'
ESP.restart();
^~~
SP
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:36:1: error: 'WiFiClient' does not name a type; did you mean 'MqttClient'?
WiFiClient client;
^~~~~~~~~~
MqttClient
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:56:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:57:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:57:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:79:31: error: 'client' was not declared in this scope
iotGuru.setNetworkClient(&client);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/05_mqtt_relay_android/05_mqtt_relay_android.ino:79:31: note: suggested alternative: 'lrint'
iotGuru.setNetworkClient(&client);
^~~~~~
lrint
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:28:1: error: 'WiFiClient' does not name a type; did you mean 'MqttClient'?
WiFiClient client;
^~~~~~~~~~
MqttClient
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:62:5: error: 'WiFi' was not declared in this scope
WiFi.begin(ssid, password);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:63:29: error: 'WL_CONNECTED' was not declared in this scope
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:63:29: note: suggested alternative: 'MQTT_CONNECTED'
while (WiFi.status() != WL_CONNECTED) {
^~~~~~~~~~~~
MQTT_CONNECTED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:80:31: error: 'client' was not declared in this scope
iotGuru.setNetworkClient(&client);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/06_ws2812_push_color/06_ws2812_push_color.ino:80:31: note: suggested alternative: 'lrint'
iotGuru.setNetworkClient(&client);
^~~~~~
lrint
Multiple libraries were found for "Adafruit_NeoPixel.h"
Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino
Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/07_smart_room/07_smart_room.ino:53:10: fatal error: BME280_MOD-1022.h: No such file or directory
#include <BME280_MOD-1022.h>
^~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-160F44CD1184B28FB84CC38700DBE29A/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-F96C6A1A774D79AA61C55DE82D9ADFEC/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-D6D3D285202B313FB376DD0E4E0DE356/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-2DC0A7421550243875A24E1801C8C5FD/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-FDB26E6650CB597A69C7348396CF0C05/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated.
Result: FAIL
WARNING: library IoTGuru claims to run on esp8266, esp32 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). <built-in>: fatal error: when writing output to /tmp/arduino-sketch-CAF4E2D494EFC43A623EF1AE03CB150F/preproc/ctags_target_for_gcc_minus_e.cpp: No space left on device compilation terminated. Multiple libraries were found for "Adafruit_NeoPixel.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_NeoPixel Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Pinduino Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Leaphy_Extra_Extension
Result: FAIL
Result: PASS
Sketch uses 263262 bytes (20%) of program storage space. Maximum is 1310720 bytes. Global variables use 13944 bytes (4%) of dynamic memory, leaving 313736 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 716898 bytes (54%) of program storage space. Maximum is 1310720 bytes. Global variables use 38832 bytes (11%) of dynamic memory, leaving 288848 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 718922 bytes (54%) of program storage space. Maximum is 1310720 bytes. Global variables use 38864 bytes (11%) of dynamic memory, leaving 288816 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 713946 bytes (54%) of program storage space. Maximum is 1310720 bytes. Global variables use 38896 bytes (11%) of dynamic memory, leaving 288784 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 730286 bytes (55%) of program storage space. Maximum is 1310720 bytes. Global variables use 38856 bytes (11%) of dynamic memory, leaving 288824 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 712594 bytes (54%) of program storage space. Maximum is 1310720 bytes. Global variables use 38896 bytes (11%) of dynamic memory, leaving 288784 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 729594 bytes (55%) of program storage space. Maximum is 1310720 bytes. Global variables use 39744 bytes (12%) of dynamic memory, leaving 287936 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IoTGuru/examples/07_smart_room/07_smart_room.ino:53:29: fatal error: BME280_MOD-1022.h: No such file or directory compilation terminated. Multiple libraries were found for "HTTPClient.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/HTTPClient Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi Multiple libraries were found for "WiFiClient.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFi Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi101 Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiEspAT Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFiNINA Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/WiFi_Link Multiple libraries were found for "WiFiClientSecure.h" Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/WiFiClientSecure Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_rpcWiFi