Iridium SBD - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Iridium SBD

Compatibility matrix

Board	Claims compatibility	Inclusion	SendReceive	Sleep	Time	BasicSend	Beacon	PassThru	Ring
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	PASS	PASS	PASS	PASS	PASS	PASS	PASS
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/BasicSend

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:35:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:35:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Beacon

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:27:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:27:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:38:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:38:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:20:19: error: 'Serial2' was not declared in this scope
 #define GPSSerial Serial2
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:39:3: note: in expansion of macro 'GPSSerial'
   GPSSerial.begin(GPSBaud);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:20:19: note: suggested alternative: 'Serial'
 #define GPSSerial Serial2
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:39:3: note: in expansion of macro 'GPSSerial'
   GPSSerial.begin(GPSBaud);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:20:19: error: 'Serial2' was not declared in this scope
 #define GPSSerial Serial2
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:63:9: note: in expansion of macro 'GPSSerial'
     if (GPSSerial.available())
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:20:19: note: suggested alternative: 'Serial'
 #define GPSSerial Serial2
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:63:9: note: in expansion of macro 'GPSSerial'
     if (GPSSerial.available())
         ^~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/PassThru

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:20:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:20:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:29:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:29:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:57:5: note: in expansion of macro 'IridiumSerial'
     IridiumSerial.write(Serial.read());
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:57:5: note: in expansion of macro 'IridiumSerial'
     IridiumSerial.write(Serial.read());
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:58:7: note: in expansion of macro 'IridiumSerial'
   if (IridiumSerial.available())
       ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:58:7: note: in expansion of macro 'IridiumSerial'
   if (IridiumSerial.available())
       ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Ring

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, -1, RING_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, -1, RING_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:33:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:33:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/SendReceive

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:36:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:36:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Sleep

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:25:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, SLEEP_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:25:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, SLEEP_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: note: suggested alternative: 'Serial'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/BasicSend

Result: PASS

Sketch uses 88754 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44380 bytes (16%) of dynamic memory, leaving 225956 bytes for local variables. Maximum is 270336 bytes.

examples/Beacon

Result: PASS

Sketch uses 90708 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44596 bytes (16%) of dynamic memory, leaving 225740 bytes for local variables. Maximum is 270336 bytes.

examples/PassThru

Result: PASS

Sketch uses 86032 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44380 bytes (16%) of dynamic memory, leaving 225956 bytes for local variables. Maximum is 270336 bytes.

examples/Ring

Result: PASS

Sketch uses 89100 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44384 bytes (16%) of dynamic memory, leaving 225952 bytes for local variables. Maximum is 270336 bytes.

examples/SendReceive

Result: PASS

Sketch uses 89134 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44572 bytes (16%) of dynamic memory, leaving 225764 bytes for local variables. Maximum is 270336 bytes.

examples/Sleep

Result: PASS

Sketch uses 88702 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44380 bytes (16%) of dynamic memory, leaving 225956 bytes for local variables. Maximum is 270336 bytes.

examples/Time

Result: PASS

Sketch uses 94762 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44524 bytes (16%) of dynamic memory, leaving 225812 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/BasicSend

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:35:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:35:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Beacon

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:27:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:27:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:38:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:38:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:20:19: error: 'Serial2' was not declared in this scope
 #define GPSSerial Serial2
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:39:3: note: in expansion of macro 'GPSSerial'
   GPSSerial.begin(GPSBaud);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:20:19: note: suggested alternative: 'Serial1'
 #define GPSSerial Serial2
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:39:3: note: in expansion of macro 'GPSSerial'
   GPSSerial.begin(GPSBaud);
   ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:20:19: error: 'Serial2' was not declared in this scope
 #define GPSSerial Serial2
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:63:9: note: in expansion of macro 'GPSSerial'
     if (GPSSerial.available())
         ^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:20:19: note: suggested alternative: 'Serial1'
 #define GPSSerial Serial2
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:63:9: note: in expansion of macro 'GPSSerial'
     if (GPSSerial.available())
         ^~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/PassThru

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:20:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:20:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:29:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:29:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:57:5: note: in expansion of macro 'IridiumSerial'
     IridiumSerial.write(Serial.read());
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:57:5: note: in expansion of macro 'IridiumSerial'
     IridiumSerial.write(Serial.read());
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:58:7: note: in expansion of macro 'IridiumSerial'
   if (IridiumSerial.available())
       ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:58:7: note: in expansion of macro 'IridiumSerial'
   if (IridiumSerial.available())
       ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Ring

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, -1, RING_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, -1, RING_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:33:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:33:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/SendReceive

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:36:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:36:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Sleep

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:25:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, SLEEP_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:25:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, SLEEP_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: note: suggested alternative: 'Serial1'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12252 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/BasicSend

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:35:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:35:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Beacon

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:27:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:27:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:38:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:38:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/PassThru

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:20:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:20:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:29:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:29:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:57:5: note: in expansion of macro 'IridiumSerial'
     IridiumSerial.write(Serial.read());
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:57:5: note: in expansion of macro 'IridiumSerial'
     IridiumSerial.write(Serial.read());
     ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:58:7: note: in expansion of macro 'IridiumSerial'
   if (IridiumSerial.available())
       ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:58:7: note: in expansion of macro 'IridiumSerial'
   if (IridiumSerial.available())
       ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Ring

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, -1, RING_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, -1, RING_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:33:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:33:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/SendReceive

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:36:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:36:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Sleep

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:25:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, SLEEP_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:25:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, SLEEP_PIN);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: note: suggested alternative: 'Serial_'
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^~~~~~~~~~~~~
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

cp: cannot create regular file '/tmp/arduino-sketch-0DFD2D2514BCE03C80ABE298F039B84E/partitions.csv': No such file or directory

examples/BasicSend

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/BasicSend/BasicSend.ino:35:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Beacon

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:27:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Beacon/Beacon.ino:38:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/PassThru

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:20:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:29:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:57:5: note: in expansion of macro 'IridiumSerial'
     IridiumSerial.write(Serial.read());
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:17:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/PassThru/PassThru.ino:58:7: note: in expansion of macro 'IridiumSerial'
   if (IridiumSerial.available())
       ^
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Ring

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, -1, RING_PIN);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Ring/Ring.ino:33:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/SendReceive

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:24:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:21:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/SendReceive/SendReceive.ino:36:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Sleep

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:25:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial, SLEEP_PIN);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:20:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Sleep/Sleep.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD

examples/Time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:23:18: note: in expansion of macro 'IridiumSerial'
 IridiumSBD modem(IridiumSerial);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:19:23: error: 'Serial3' was not declared in this scope
 #define IridiumSerial Serial3
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD/examples/Time/Time.ino:34:3: note: in expansion of macro 'IridiumSerial'
   IridiumSerial.begin(19200);
   ^
Multiple libraries were found for "IridiumSBD.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IridiumSBDi2c
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Iridium_SBD