IwitVolumeKnob - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

IwitVolumeKnob

Version: 1.0.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Blink	EncoderTest	MouseWheel	VolumeKnob
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1514 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 31 bytes (1%) of dynamic memory, leaving 2017 bytes for local variables. Maximum is 2048 bytes.

examples/Blink

Result: PASS

Sketch uses 1668 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 31 bytes (1%) of dynamic memory, leaving 2017 bytes for local variables. Maximum is 2048 bytes.

examples/EncoderTest

Result: PASS

Sketch uses 3066 bytes (9%) of program storage space. Maximum is 32256 bytes.
Global variables use 226 bytes (11%) of dynamic memory, leaving 1822 bytes for local variables. Maximum is 2048 bytes.

examples/MouseWheel

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:35:2: error: #error HID Project can only be used with an USB MCU.
 #error HID Project can only be used with an USB MCU.
  ^~~~~

examples/VolumeKnob

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:35:2: error: #error HID Project can only be used with an USB MCU.
 #error HID Project can only be used with an USB MCU.
  ^~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: note: suggested alternative: 'EINTR'
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
                      EINTR

examples/Blink

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: note: suggested alternative: 'EINTR'
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
                      EINTR

examples/EncoderTest

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: note: suggested alternative: 'EINTR'
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
                      EINTR

examples/MouseWheel

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:35:2: error: #error HID Project can only be used with an USB MCU.
 #error HID Project can only be used with an USB MCU.
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:39:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/SingleAbsoluteMouse.h:28:10: fatal error: HID.h: No such file or directory
 #include "HID.h"
          ^~~~~~~
compilation terminated.

examples/VolumeKnob

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:35:2: error: #error HID Project can only be used with an USB MCU.
 #error HID Project can only be used with an USB MCU.
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:39:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/SingleAbsoluteMouse.h:28:10: fatal error: HID.h: No such file or directory
 #include "HID.h"
          ^~~~~~~
compilation terminated.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: note: suggested alternative: 'PIN1'
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
                      PIN1

examples/Blink

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: note: suggested alternative: 'PIN1'
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
                      PIN1

examples/EncoderTest

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: note: suggested alternative: 'PIN1'
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~
                      PIN1

examples/MouseWheel

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:35:2: error: #error HID Project can only be used with an USB MCU.
 #error HID Project can only be used with an USB MCU.
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/SingleAbsoluteMouse.h:28:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:39,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/HID/src/HID.h:125:2: error: #error "No Native USB support available on this board"
 #error "No Native USB support available on this board"
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/SingleAbsoluteMouse.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:39,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Settings.h:145:2: error: #error "Unsupported architecture"
 #error "Unsupported architecture"
  ^~~~~

examples/VolumeKnob

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:35:2: error: #error HID Project can only be used with an USB MCU.
 #error HID Project can only be used with an USB MCU.
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/SingleAbsoluteMouse.h:28:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:39,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/HID/src/HID.h:125:2: error: #error "No Native USB support available on this board"
 #error "No Native USB support available on this board"
  ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/SingleAbsoluteMouse.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:39,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Settings.h:145:2: error: #error "Unsupported architecture"
 #error "Unsupported architecture"
  ^~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~

examples/Blink

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~

examples/EncoderTest

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^~~~

examples/MouseWheel

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/../HID-APIs/KeyboardAPI.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/../HID-APIs/DefaultKeyboardAPI.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/BootKeyboard.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:50,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/../HID-APIs/../KeyboardLayouts/ImprovedKeylayouts.h:54:21: note: #pragma message: Using default ASCII layout for keyboard modules
     #pragma message "Using default ASCII layout for keyboard modules"
                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:19:30: error: 'class USBDeviceClass' has no member named 'isSuspended'
   bool suspended = USBDevice.isSuspended();
                              ^~~~~~~~~~~

examples/VolumeKnob

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/../HID-APIs/KeyboardAPI.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/../HID-APIs/DefaultKeyboardAPI.h:27,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/BootKeyboard.h:30,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:50,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/../HID-APIs/../KeyboardLayouts/ImprovedKeylayouts.h:54:21: note: #pragma message: Using default ASCII layout for keyboard modules
     #pragma message "Using default ASCII layout for keyboard modules"
                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:22:30: error: 'class USBDeviceClass' has no member named 'isSuspended'
   bool suspended = USBDevice.isSuspended();
                              ^~~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::setLed(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:72:35: error: 'analogWrite' was not declared in this scope
   analogWrite(IWIT_LED_PIN, aValue);
                                   ^

examples/Blink

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::setLed(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:72:35: error: 'analogWrite' was not declared in this scope
   analogWrite(IWIT_LED_PIN, aValue);
                                   ^

examples/EncoderTest

Result: FAIL

WARNING: library IwitVolumeKnob claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::AttachInterrupts()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:8: error: 'EIMSK' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:56:22: error: 'INT1' was not declared in this scope
   if ((EIMSK & (1 << INT1)) == 0) { // If we haven't set INT1 with this
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp: In member function 'void IwitKnob_::setLed(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/IwitVolumeKnob.cpp:72:35: error: 'analogWrite' was not declared in this scope
   analogWrite(IWIT_LED_PIN, aValue);
                                   ^

examples/MouseWheel

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:35:2: error: #error HID Project can only be used with an USB MCU.
 #error HID Project can only be used with an USB MCU.
  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:39:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/MouseWheel/MouseWheel.ino:7:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/SingleAbsoluteMouse.h:28:17: fatal error: HID.h: No such file or directory
compilation terminated.

examples/VolumeKnob

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:35:2: error: #error HID Project can only be used with an USB MCU.
 #error HID Project can only be used with an USB MCU.
  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/HID-Project.h:39:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IwitVolumeKnob/examples/VolumeKnob/VolumeKnob.ino:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/HID-Project/src/SingleReport/SingleAbsoluteMouse.h:28:17: fatal error: HID.h: No such file or directory
compilation terminated.