KONNEKTING Device Library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

KONNEKTING Device Library

Version: 1.0.0-BETA4b
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	DemoSketch	DemoSketch_without_pins	Communication_test
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No ⚠️	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 3460 bytes (10%) of program storage space. Maximum is 32256 bytes.
Global variables use 190 bytes (9%) of dynamic memory, leaving 1858 bytes for local variables. Maximum is 2048 bytes.

examples/Communication_test

Result: PASS

Sketch uses 18118 bytes (56%) of program storage space. Maximum is 32256 bytes.
Global variables use 647 bytes (31%) of dynamic memory, leaving 1401 bytes for local variables. Maximum is 2048 bytes.

examples/DemoSketch

Result: PASS

Sketch uses 18102 bytes (56%) of program storage space. Maximum is 32256 bytes.
Global variables use 629 bytes (30%) of dynamic memory, leaving 1419 bytes for local variables. Maximum is 2048 bytes.

examples/DemoSketch_without_pins

Result: PASS

Sketch uses 17792 bytes (55%) of program storage space. Maximum is 32256 bytes.
Global variables use 629 bytes (30%) of dynamic memory, leaving 1419 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).

examples/Communication_test

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/Communication_test/Communication_test.ino:53:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^~~~~

examples/DemoSketch

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/DemoSketch/DemoSketch.ino:62:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^~~~~

examples/DemoSketch_without_pins

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/DemoSketch_without_pins/DemoSketch_without_pins.ino:62:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 4115 bytes (8%) of program storage space. Maximum is 49152 bytes.
Global variables use 291 bytes (4%) of dynamic memory, leaving 5853 bytes for local variables. Maximum is 6144 bytes.

examples/Communication_test

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/Communication_test/Communication_test.ino:53:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^~~~~
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/DemoSketch

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/DemoSketch/DemoSketch.ino:62:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^~~~~
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/DemoSketch_without_pins

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/DemoSketch_without_pins/DemoSketch_without_pins.ino:62:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^~~~~
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS
This library has no main header file so an empty one was created.

Sketch uses 29812 bytes (11%) of program storage space. Maximum is 262144 bytes.
Global variables use 3768 bytes (11%) of dynamic memory, leaving 29000 bytes for local variables. Maximum is 32768 bytes.

examples/Communication_test

Result: PASS

Sketch uses 39364 bytes (15%) of program storage space. Maximum is 262144 bytes.
Global variables use 3856 bytes (11%) of dynamic memory, leaving 28912 bytes for local variables. Maximum is 32768 bytes.

examples/DemoSketch

Result: PASS

Sketch uses 41492 bytes (15%) of program storage space. Maximum is 262144 bytes.
Global variables use 4428 bytes (13%) of dynamic memory, leaving 28340 bytes for local variables. Maximum is 32768 bytes.

examples/DemoSketch_without_pins

Result: PASS

Sketch uses 41020 bytes (15%) of program storage space. Maximum is 262144 bytes.
Global variables use 4424 bytes (13%) of dynamic memory, leaving 28344 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 211330 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13616 bytes (4%) of dynamic memory, leaving 314064 bytes for local variables. Maximum is 327680 bytes.

examples/Communication_test

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/Communication_test/Communication_test.ino:53:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/DemoSketch

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/DemoSketch/DemoSketch.ino:62:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum

examples/DemoSketch_without_pins

Result: FAIL

WARNING: library KONNEKTING_Device_Library claims to run on avr, esp8266, samd, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KONNEKTING_Device_Library/examples/DemoSketch_without_pins/DemoSketch_without_pins.ino:62:2: error: #error "Sorry, you board is not supported"
 #error "Sorry, you board is not supported"
  ^
Multiple libraries were found for "EEPROM.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/libraries/EEPROM
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Hello_Drum
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/arduino-NVM