KTMS1201 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

KTMS1201

Version: 1.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	HelloWorld	ReadAnalog	SerialDisplay
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/HelloWorld

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~

examples/ReadAnalog

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:26:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:24:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~

examples/SerialDisplay

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/HelloWorld

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:45:16: error: call of overloaded 'print(int)' is ambiguous
   lcd.print(123);
                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:68:10: note: candidate: void KTMS1201::print(char)
     void print(char);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:69:10: note: candidate: void KTMS1201::print(uint32_t, uint8_t)
     void print(uint32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:70:10: note: candidate: void KTMS1201::print(int32_t, uint8_t)
     void print(int32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:71:10: note: candidate: void KTMS1201::print(uint16_t, uint8_t)
     void print(uint16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:72:10: note: candidate: void KTMS1201::print(int16_t, uint8_t)
     void print(int16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:73:10: note: candidate: void KTMS1201::print(double, uint8_t)
     void print(double, uint8_t decimals = 2);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:47:17: error: call of overloaded 'print(int)' is ambiguous
   lcd.print(-123);
                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:68:10: note: candidate: void KTMS1201::print(char)
     void print(char);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:69:10: note: candidate: void KTMS1201::print(uint32_t, uint8_t)
     void print(uint32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:70:10: note: candidate: void KTMS1201::print(int32_t, uint8_t)
     void print(int32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:71:10: note: candidate: void KTMS1201::print(uint16_t, uint8_t)
     void print(uint16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:72:10: note: candidate: void KTMS1201::print(int16_t, uint8_t)
     void print(int16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:73:10: note: candidate: void KTMS1201::print(double, uint8_t)
     void print(double, uint8_t decimals = 2);
          ^~~~~

examples/ReadAnalog

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:26:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:24:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:52:34: error: call of overloaded 'print(int)' is ambiguous
   lcd.print(analogRead(analogPin));
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:68:10: note: candidate: void KTMS1201::print(char)
     void print(char);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:69:10: note: candidate: void KTMS1201::print(uint32_t, uint8_t)
     void print(uint32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:70:10: note: candidate: void KTMS1201::print(int32_t, uint8_t)
     void print(int32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:71:10: note: candidate: void KTMS1201::print(uint16_t, uint8_t)
     void print(uint16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:72:10: note: candidate: void KTMS1201::print(int16_t, uint8_t)
     void print(int16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:73:10: note: candidate: void KTMS1201::print(double, uint8_t)
     void print(double, uint8_t decimals = 2);
          ^~~~~

examples/SerialDisplay

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/HelloWorld

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~

examples/ReadAnalog

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:26:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:24:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~

examples/SerialDisplay

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/HelloWorld

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:45:16: error: call of overloaded 'print(int)' is ambiguous
   lcd.print(123);
                ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:68:10: note: candidate: void KTMS1201::print(char)
     void print(char);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:69:10: note: candidate: void KTMS1201::print(uint32_t, uint8_t)
     void print(uint32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:70:10: note: candidate: void KTMS1201::print(int32_t, uint8_t)
     void print(int32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:71:10: note: candidate: void KTMS1201::print(uint16_t, uint8_t)
     void print(uint16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:72:10: note: candidate: void KTMS1201::print(int16_t, uint8_t)
     void print(int16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:73:10: note: candidate: void KTMS1201::print(double, uint8_t)
     void print(double, uint8_t decimals = 2);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:47:17: error: call of overloaded 'print(int)' is ambiguous
   lcd.print(-123);
                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:68:10: note: candidate: void KTMS1201::print(char)
     void print(char);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:69:10: note: candidate: void KTMS1201::print(uint32_t, uint8_t)
     void print(uint32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:70:10: note: candidate: void KTMS1201::print(int32_t, uint8_t)
     void print(int32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:71:10: note: candidate: void KTMS1201::print(uint16_t, uint8_t)
     void print(uint16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:72:10: note: candidate: void KTMS1201::print(int16_t, uint8_t)
     void print(int16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:73:10: note: candidate: void KTMS1201::print(double, uint8_t)
     void print(double, uint8_t decimals = 2);
          ^~~~~

examples/ReadAnalog

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:26:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:24:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:52:34: error: call of overloaded 'print(int)' is ambiguous
   lcd.print(analogRead(analogPin));
                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:68:10: note: candidate: void KTMS1201::print(char)
     void print(char);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:69:10: note: candidate: void KTMS1201::print(uint32_t, uint8_t)
     void print(uint32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:70:10: note: candidate: void KTMS1201::print(int32_t, uint8_t)
     void print(int32_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:71:10: note: candidate: void KTMS1201::print(uint16_t, uint8_t)
     void print(uint16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:72:10: note: candidate: void KTMS1201::print(int16_t, uint8_t)
     void print(int16_t, uint8_t base = DEC);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:73:10: note: candidate: void KTMS1201::print(double, uint8_t)
     void print(double, uint8_t decimals = 2);
          ^~~~~

examples/SerialDisplay

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 198598 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13096 bytes (3%) of dynamic memory, leaving 314584 bytes for local variables. Maximum is 327680 bytes.

examples/HelloWorld

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:19:6: error: 'byte BUSY' redeclared as different kind of symbol
 byte BUSY = 7;
      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-849A75B4651A6936DCD283287EB461F5/sketch/HelloWorld.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:633:5: note: previous declaration 'STATUS BUSY'
     BUSY,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:95:26: error: call of overloaded 'print(long unsigned int)' is ambiguous
   lcd.print(millis()/1000);
                          ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/HelloWorld/HelloWorld.ino:12:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:68:10: note: candidate: void KTMS1201::print(char)
     void print(char);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:69:10: note: candidate: void KTMS1201::print(uint32_t, uint8_t)
     void print(uint32_t, uint8_t base = DEC);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:70:10: note: candidate: void KTMS1201::print(int32_t, uint8_t)
     void print(int32_t, uint8_t base = DEC);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:71:10: note: candidate: void KTMS1201::print(uint16_t, uint8_t)
     void print(uint16_t, uint8_t base = DEC);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:72:10: note: candidate: void KTMS1201::print(int16_t, uint8_t)
     void print(int16_t, uint8_t base = DEC);
          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/src/KTMS1201.h:73:10: note: candidate: void KTMS1201::print(double, uint8_t)
     void print(double, uint8_t decimals = 2);
          ^

examples/ReadAnalog

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:20:6: error: 'byte BUSY' redeclared as different kind of symbol
 byte BUSY = 7;
      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-140B542244CB82925B8840C5C3E9D700/sketch/ReadAnalog.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:633:5: note: previous declaration 'STATUS BUSY'
     BUSY,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:26:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/ReadAnalog/ReadAnalog.ino:24:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^

examples/SerialDisplay

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:19:6: error: 'byte BUSY' redeclared as different kind of symbol
 byte BUSY = 7;
      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOSConfig.h:120:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/freertos/freertos/FreeRTOS.h:99,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:32,
                 from /tmp/arduino-sketch-9885A85C290AEEB9FABB4488119A8BA2/sketch/SerialDisplay.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/esp32/rom/ets_sys.h:633:5: note: previous declaration 'STATUS BUSY'
     BUSY,
     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:25:14: error: redefinition of 'KTMS1201 lcd'
 KTMS1201 lcd(N_SCK, SI, CD, RESET, CS);
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KTMS1201/examples/SerialDisplay/SerialDisplay.ino:23:10: note: 'KTMS1201 lcd' previously declared here
 KTMS1201 lcd(N_SCK, SI, CD, RESET, BUSY, CS);
          ^