This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.3.0
More details
| Board | Claims compatibility | Inclusion | basic_working |
|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL |
Result: PASS
Sketch uses 490 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:12:14: error: 'Serial3' was not declared in this scope
#define bike Serial3
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:14: note: in expansion of macro 'bike'
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:12:14: note: suggested alternative: 'Serial'
#define bike Serial3
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:14: note: in expansion of macro 'bike'
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:28: error: 'YOUR_MOTORBIKE' was not declared in this scope
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~~~~~~~~~~~
Result: PASS
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:28: error: 'YOUR_MOTORBIKE' was not declared in this scope
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~~~~~~~~~~~
Result: PASS
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:12:14: error: 'Serial3' was not declared in this scope
#define bike Serial3
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:14: note: in expansion of macro 'bike'
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:12:14: note: suggested alternative: 'Serial1'
#define bike Serial3
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:14: note: in expansion of macro 'bike'
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:28: error: 'YOUR_MOTORBIKE' was not declared in this scope
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~~~~~~~~~~~
Result: PASS
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:12:14: error: 'Serial3' was not declared in this scope
#define bike Serial3
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:14: note: in expansion of macro 'bike'
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:12:14: note: suggested alternative: 'Serial_'
#define bike Serial3
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:14: note: in expansion of macro 'bike'
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:28: error: 'YOUR_MOTORBIKE' was not declared in this scope
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:23:56: error: no matching function for call to 'KWP2000::enableDebug(Serial_*, debug_enum, int)'
ECU.enableDebug(&debug, DEBUG_LEVEL_VERBOSE, 115200);
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/src/KWP2000.h:83:8: note: candidate: void KWP2000::enableDebug(arduino::HardwareSerial*, uint8_t, uint32_t)
void enableDebug(HardwareSerial *debug_serial, const uint8_t debug_level = DEBUG_LEVEL_DEFAULT, const uint32_t debug_baudrate = 115200);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/src/KWP2000.h:83:8: note: no known conversion for argument 1 from 'Serial_*' to 'arduino::HardwareSerial*'
Result: PASS
Sketch uses 200902 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13192 bytes (4%) of dynamic memory, leaving 314488 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KWP2000/examples/basic_working/basic_working.ino:19:28: error: 'YOUR_MOTORBIKE' was not declared in this scope
KWP2000 ECU(&bike, TX_PIN, YOUR_MOTORBIKE);
^