Krypton - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Krypton

Version: 0.0.1
More details

Compatibility matrix

Board Claims compatibility Inclusion 
FuelControl
arduino:avr:uno
1.8.4 		Yes PASS FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes ⚠️ FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		Yes ⚠️ FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 2044 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 378 bytes (18%) of dynamic memory, leaving 1670 bytes for local variables. Maximum is 2048 bytes.

examples/FuelControl

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:12:3: error: 'Krypton' was not declared in this scope
   Krypton krypton(8); // Define the Krypton board communications pin
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:20: error: 'Krypton' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: error: 'flow_speed' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: note: suggested alternative: 'fuel_speed'
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^~~~~~~~~~
                                      fuel_speed

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL 

In file included from /tmp/arduino-testlib2888364314/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Boards.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KiddeeExpress
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FirmataExpress

examples/FuelControl

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:12:3: error: 'Krypton' was not declared in this scope
   Krypton krypton(8); // Define the Krypton board communications pin
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:20: error: 'Krypton' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: error: 'flow_speed' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: note: suggested alternative: 'fuel_speed'
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^~~~~~~~~~
                                      fuel_speed

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

In file included from /tmp/arduino-testlib2888364314/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Boards.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KiddeeExpress
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FirmataExpress

examples/FuelControl

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:12:3: error: 'Krypton' was not declared in this scope
   Krypton krypton(8); // Define the Krypton board communications pin
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:20: error: 'Krypton' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: error: 'flow_speed' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: note: suggested alternative: 'fuel_speed'
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^~~~~~~~~~
                                      fuel_speed

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

In file included from /tmp/arduino-testlib520022346/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^~~~~
Multiple libraries were found for "Boards.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KiddeeExpress
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FirmataExpress

examples/FuelControl

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:12:3: error: 'Krypton' was not declared in this scope
   Krypton krypton(8); // Define the Krypton board communications pin
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:20: error: 'Krypton' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                    ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: error: 'flow_speed' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: note: suggested alternative: 'fuel_speed'
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^~~~~~~~~~
                                      fuel_speed

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL 

In file included from /tmp/arduino-testlib3299665788/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata/Boards.h:856:2: error: #error "Please edit Boards.h with a hardware abstraction for this board"
 #error "Please edit Boards.h with a hardware abstraction for this board"
  ^
Multiple libraries were found for "Boards.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Firmata
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FirmataExpress
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/KiddeeExpress

examples/FuelControl

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:12:3: error: 'Krypton' was not declared in this scope
   Krypton krypton(8); // Define the Krypton board communications pin
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:20: error: 'Krypton' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Krypton/examples/FuelControl/FuelControl.ino:19:38: error: 'flow_speed' was not declared in this scope
   int fuel_speed = Krypton.fuel_ctrl(flow_speed);
                                      ^