LedBlinky - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

LedBlinky

Version: 1.3.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	Blink	Fade	Helloworld	LedPullDown	LedPullUp
arduino:avr:uno 1.8.4	Yes	PASS	PASS	PASS	PASS	PASS	PASS
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	PASS	PASS	PASS	PASS	PASS
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	PASS	PASS	PASS	PASS
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/Blink

Result: PASS

Sketch uses 1664 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 17 bytes (0%) of dynamic memory, leaving 2031 bytes for local variables. Maximum is 2048 bytes.

examples/Fade

Result: PASS

Sketch uses 1634 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 17 bytes (0%) of dynamic memory, leaving 2031 bytes for local variables. Maximum is 2048 bytes.

examples/Helloworld

Result: PASS

Sketch uses 2388 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 192 bytes (9%) of dynamic memory, leaving 1856 bytes for local variables. Maximum is 2048 bytes.

examples/LedPullDown

Result: PASS

Sketch uses 1786 bytes (5%) of program storage space. Maximum is 32256 bytes.
Global variables use 192 bytes (9%) of dynamic memory, leaving 1856 bytes for local variables. Maximum is 2048 bytes.

examples/LedPullUp

Result: PASS

Sketch uses 2350 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 278 bytes (13%) of dynamic memory, leaving 1770 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState, PullType)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort

examples/Blink

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState, PullType)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort

examples/Fade

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState, PullType)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort

examples/Helloworld

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState, PullType)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort

examples/LedPullDown

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState, PullType)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort

examples/LedPullUp

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState, PullType)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:44:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In constructor 'LedBlinky::LedBlinky(uint8_t, LedState)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: error: 'digitalPinHasPWM' was not declared in this scope
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:131:13: note: suggested alternative: 'digitalPinToPort'
   _pinPWM = digitalPinHasPWM(pin);
             ^~~~~~~~~~~~~~~~
             digitalPinToPort

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/Blink

Result: PASS

Sketch uses 2198 bytes (4%) of program storage space. Maximum is 49152 bytes.
Global variables use 30 bytes (0%) of dynamic memory, leaving 6114 bytes for local variables. Maximum is 6144 bytes.

examples/Fade

Result: PASS

Sketch uses 2136 bytes (4%) of program storage space. Maximum is 49152 bytes.
Global variables use 30 bytes (0%) of dynamic memory, leaving 6114 bytes for local variables. Maximum is 6144 bytes.

examples/Helloworld

Result: PASS

Sketch uses 3296 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 185 bytes (3%) of dynamic memory, leaving 5959 bytes for local variables. Maximum is 6144 bytes.

examples/LedPullDown

Result: PASS

Sketch uses 2776 bytes (5%) of program storage space. Maximum is 49152 bytes.
Global variables use 185 bytes (3%) of dynamic memory, leaving 5959 bytes for local variables. Maximum is 6144 bytes.

examples/LedPullUp

Result: PASS

Sketch uses 3250 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 185 bytes (3%) of dynamic memory, leaving 5959 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/Blink

Result: PASS

Sketch uses 13184 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3044 bytes (9%) of dynamic memory, leaving 29724 bytes for local variables. Maximum is 32768 bytes.

examples/Fade

Result: PASS

Sketch uses 13164 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3044 bytes (9%) of dynamic memory, leaving 29724 bytes for local variables. Maximum is 32768 bytes.

examples/Helloworld

Result: PASS

Sketch uses 12644 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3004 bytes (9%) of dynamic memory, leaving 29764 bytes for local variables. Maximum is 32768 bytes.

examples/LedPullDown

Result: PASS

Sketch uses 12408 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3004 bytes (9%) of dynamic memory, leaving 29764 bytes for local variables. Maximum is 32768 bytes.

examples/LedPullUp

Result: PASS

Sketch uses 12944 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 3004 bytes (9%) of dynamic memory, leaving 29764 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In member function 'void LedBlinky::setBrightness(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:339:34: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, _brightness);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:351:38: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, 255-_brightness);
                                      ^

examples/Blink

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In member function 'void LedBlinky::setBrightness(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:339:34: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, _brightness);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:351:38: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, 255-_brightness);
                                      ^

examples/Fade

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In member function 'void LedBlinky::setBrightness(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:339:34: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, _brightness);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:351:38: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, 255-_brightness);
                                      ^

examples/Helloworld

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In member function 'void LedBlinky::setBrightness(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:339:34: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, _brightness);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:351:38: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, 255-_brightness);
                                      ^

examples/LedPullDown

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In member function 'void LedBlinky::setBrightness(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:339:34: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, _brightness);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:351:38: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, 255-_brightness);
                                      ^

examples/LedPullUp

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp: In member function 'void LedBlinky::setBrightness(uint8_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:339:34: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, _brightness);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LedBlinky/src/LedBlinky.cpp:351:38: error: 'analogWrite' was not declared in this scope
     analogWrite(_pin, 255-_brightness);
                                      ^