Libdevlpr - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Libdevlpr

Version: 0.2.1
More details

Compatibility matrix

Board Claims compatibility Inclusion 
flex_detection
 
plot_avg_emg
 
plot_centered_raw_emg
 
plot_filtered_emg
 
plot_peak
 
plot_peak_to_peak
 
plot_raw_emg
arduino:avr:uno
1.8.4 		Yes PASS PASS PASS PASS PASS PASS PASS PASS
arduino:mbed_nano:nanorp2040connect
2.7.2 		No ⚠️ PASS PASS PASS PASS PASS PASS PASS PASS
arduino:megaavr:nona4809
1.8.7 		No ⚠️ PASS PASS PASS PASS PASS PASS PASS PASS
arduino:samd:mkrwifi1010
1.8.12 		No ⚠️ PASS PASS PASS PASS PASS PASS PASS PASS
esp32:esp32:d1_mini32
1.0.6 		No ⚠️ PASS PASS PASS PASS PASS PASS PASS PASS

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS 

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/flex_detection

Result: PASS 

Sketch uses 3738 bytes (11%) of program storage space. Maximum is 32256 bytes.
Global variables use 503 bytes (24%) of dynamic memory, leaving 1545 bytes for local variables. Maximum is 2048 bytes.

examples/plot_avg_emg

Result: PASS 

Sketch uses 4084 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 507 bytes (24%) of dynamic memory, leaving 1541 bytes for local variables. Maximum is 2048 bytes.

examples/plot_centered_raw_emg

Result: PASS 

Sketch uses 4116 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 511 bytes (24%) of dynamic memory, leaving 1537 bytes for local variables. Maximum is 2048 bytes.

examples/plot_filtered_emg

Result: PASS 

Sketch uses 4470 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 511 bytes (24%) of dynamic memory, leaving 1537 bytes for local variables. Maximum is 2048 bytes.

examples/plot_peak

Result: PASS 

Sketch uses 4042 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 507 bytes (24%) of dynamic memory, leaving 1541 bytes for local variables. Maximum is 2048 bytes.

examples/plot_peak_to_peak

Result: PASS 

Sketch uses 4104 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 507 bytes (24%) of dynamic memory, leaving 1541 bytes for local variables. Maximum is 2048 bytes.

examples/plot_raw_emg

Result: PASS 

Sketch uses 4090 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 507 bytes (24%) of dynamic memory, leaving 1541 bytes for local variables. Maximum is 2048 bytes.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/flex_detection

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83034 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43996 bytes (16%) of dynamic memory, leaving 226340 bytes for local variables. Maximum is 270336 bytes.

examples/plot_avg_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83158 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43996 bytes (16%) of dynamic memory, leaving 226340 bytes for local variables. Maximum is 270336 bytes.

examples/plot_centered_raw_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83158 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43996 bytes (16%) of dynamic memory, leaving 226340 bytes for local variables. Maximum is 270336 bytes.

examples/plot_filtered_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83202 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43996 bytes (16%) of dynamic memory, leaving 226340 bytes for local variables. Maximum is 270336 bytes.

examples/plot_peak

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83238 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43996 bytes (16%) of dynamic memory, leaving 226340 bytes for local variables. Maximum is 270336 bytes.

examples/plot_peak_to_peak

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83158 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43996 bytes (16%) of dynamic memory, leaving 226340 bytes for local variables. Maximum is 270336 bytes.

examples/plot_raw_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 83184 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43996 bytes (16%) of dynamic memory, leaving 226340 bytes for local variables. Maximum is 270336 bytes.

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/flex_detection

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 4984 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 488 bytes (7%) of dynamic memory, leaving 5656 bytes for local variables. Maximum is 6144 bytes.

examples/plot_avg_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5237 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 488 bytes (7%) of dynamic memory, leaving 5656 bytes for local variables. Maximum is 6144 bytes.

examples/plot_centered_raw_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5269 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 488 bytes (7%) of dynamic memory, leaving 5656 bytes for local variables. Maximum is 6144 bytes.

examples/plot_filtered_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5623 bytes (11%) of program storage space. Maximum is 49152 bytes.
Global variables use 488 bytes (7%) of dynamic memory, leaving 5656 bytes for local variables. Maximum is 6144 bytes.

examples/plot_peak

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5195 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 488 bytes (7%) of dynamic memory, leaving 5656 bytes for local variables. Maximum is 6144 bytes.

examples/plot_peak_to_peak

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5257 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 488 bytes (7%) of dynamic memory, leaving 5656 bytes for local variables. Maximum is 6144 bytes.

examples/plot_raw_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5243 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 488 bytes (7%) of dynamic memory, leaving 5656 bytes for local variables. Maximum is 6144 bytes.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/flex_detection

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16028 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3472 bytes (10%) of dynamic memory, leaving 29296 bytes for local variables. Maximum is 32768 bytes.

examples/plot_avg_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16236 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3472 bytes (10%) of dynamic memory, leaving 29296 bytes for local variables. Maximum is 32768 bytes.

examples/plot_centered_raw_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16240 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3472 bytes (10%) of dynamic memory, leaving 29296 bytes for local variables. Maximum is 32768 bytes.

examples/plot_filtered_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16284 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3472 bytes (10%) of dynamic memory, leaving 29296 bytes for local variables. Maximum is 32768 bytes.

examples/plot_peak

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16316 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3472 bytes (10%) of dynamic memory, leaving 29296 bytes for local variables. Maximum is 32768 bytes.

examples/plot_peak_to_peak

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16236 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3472 bytes (10%) of dynamic memory, leaving 29296 bytes for local variables. Maximum is 32768 bytes.

examples/plot_raw_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
Sketch uses 16264 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3472 bytes (10%) of dynamic memory, leaving 29296 bytes for local variables. Maximum is 32768 bytes.

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 198026 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13096 bytes (3%) of dynamic memory, leaving 314584 bytes for local variables. Maximum is 327680 bytes.

examples/flex_detection

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 221042 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.

examples/plot_avg_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 221150 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.

examples/plot_centered_raw_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 221150 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.

examples/plot_filtered_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 221198 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.

examples/plot_peak

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 221222 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.

examples/plot_peak_to_peak

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 221150 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.

examples/plot_raw_emg

Result: PASS 

WARNING: library Libdevlpr claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 221174 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13920 bytes (4%) of dynamic memory, leaving 313760 bytes for local variables. Maximum is 327680 bytes.