Liquid Handling Robotics - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

Liquid Handling Robotics

Version: 1.2.0
More details

Compatibility matrix

Board Claims compatibility Inclusion 
asciiIO
 
firmataIO
arduino:avr:uno
1.8.4 		Yes PASS FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes ⚠️ FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		Yes ⚠️ FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes ⚠️ FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS
This library has no main header file so an empty one was created. 

Sketch uses 1356 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 193 bytes (9%) of dynamic memory, leaving 1855 bytes for local variables. Maximum is 2048 bytes.
In file included from /tmp/arduino-testlib1805118927/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:33:87: note: #pragma message: WARNING: LiquidHandlingRobotics::Transport must be defined manually.
 #pragma message("WARNING: LiquidHandlingRobotics::Transport must be defined manually.")
                                                                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:34:86: note: #pragma message: WARNING: LiquidHandlingRobotics::Messager must be defined manually.
 #pragma message("WARNING: LiquidHandlingRobotics::Messager must be defined manually.")
                                                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:12:0,
                 from /tmp/arduino-testlib1805118927/test/test.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:25:106: note: #pragma message: INFO: LiquidHandlingRobotics::Transport defined to use the ASCII-based transport layer.
 #pragma message("INFO: LiquidHandlingRobotics::Transport defined to use the ASCII-based transport layer.")
                                                                                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:26:105: note: #pragma message: INFO: LiquidHandlingRobotics::Messager defined to use the ASCII-based transport layer.
 #pragma message("INFO: LiquidHandlingRobotics::Messager defined to use the ASCII-based transport layer.")
                                                                                                         ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:12:0,
                 from /tmp/arduino-testlib1805118927/test/test.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:44:102: note: #pragma message: INFO: LiquidHandlingRobotics::Core defined to use LiquidHandlingRobotics::Messager.
 #pragma message("INFO: LiquidHandlingRobotics::Core defined to use LiquidHandlingRobotics::Messager.")
                                                                                                      ^
In file included from /tmp/arduino-testlib1805118927/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:74:48: note: #pragma message: INFO: Serial logging enabled.
 #pragma message("INFO: Serial logging enabled.")
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:104:113: note: #pragma message: INFO: Messaging system can be instantiated with LHR_instantiateMessaging(transport, messager).
 #pragma message("INFO: Messaging system can be instantiated with LHR_instantiateMessaging(transport, messager).")
                                                                                                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:105:107: note: #pragma message: INFO: Messaging system can be set up with LHR_setupMessaging(transport, messager, core).
 #pragma message("INFO: Messaging system can be set up with LHR_setupMessaging(transport, messager, core).")
                                                                                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:106:95: note: #pragma message: INFO: Messaging system can be connected with LHR_connectMessaging(messager).
 #pragma message("INFO: Messaging system can be connected with LHR_connectMessaging(messager).")
                                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:107:103: note: #pragma message: INFO: Messaging system can be updated with LHR_updateMessaging(transport, messager).
 #pragma message("INFO: Messaging system can be updated with LHR_updateMessaging(transport, messager).")
                                                                                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:126:114: note: #pragma message: INFO: Basic protocol functionality can be instantiated with LHR_instantiateBasics(core, board).
 #pragma message("INFO: Basic protocol functionality can be instantiated with LHR_instantiateBasics(core, board).")
                                                                                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:127:102: note: #pragma message: INFO: Basic protocol functionality can be set up with LHR_setupBasics(core, board).
 #pragma message("INFO: Basic protocol functionality can be set up with LHR_setupBasics(core, board).")
                                                                                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:128:107: note: #pragma message: INFO: Basic protocol functionality can be connected with LHR_connectBasics(core, board).
 #pragma message("INFO: Basic protocol functionality can be connected with LHR_connectBasics(core, board).")
                                                                                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:129:104: note: #pragma message: INFO: Basic protocol functionality can be updated with LHR_updateBasics(core, board).
 #pragma message("INFO: Basic protocol functionality can be updated with LHR_updateBasics(core, board).")
                                                                                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:130:88: note: #pragma message: INFO: Basic protocol functionality includes the Core protocol subset.
 #pragma message("INFO: Basic protocol functionality includes the Core protocol subset.")
                                                                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:137:97: note: #pragma message: INFO: Basic protocol functionality does not include the Board protocol subset.
 #pragma message("INFO: Basic protocol functionality does not include the Board protocol subset.")
                                                                                                 ^
In file included from /tmp/arduino-testlib1805118927/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:174:99: note: #pragma message: INFO: Linear actuator protocol functionality does not include the pipettor axis.
 #pragma message("INFO: Linear actuator protocol functionality does not include the pipettor axis.")
                                                                                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:184:92: note: #pragma message: INFO: Linear actuator protocol functionality does not include the z axis.
 #pragma message("INFO: Linear actuator protocol functionality does not include the z axis.")
                                                                                            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:195:92: note: #pragma message: INFO: Linear actuator protocol functionality does not include the y axis.
 #pragma message("INFO: Linear actuator protocol functionality does not include the y axis.")
                                                                                            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:207:92: note: #pragma message: INFO: Linear actuator protocol functionality does not include the x axis.
 #pragma message("INFO: Linear actuator protocol functionality does not include the x axis.")
                                                                                            ^

examples/asciiIO

Result: FAIL 


					
					
examples/firmataIO

					

						Result: FAIL
					

					

					
				
				
arduino:mbed_nano:nanorp2040connect @ 2.7.2

				
Inclusion

				

					Result: FAIL
					
				

				
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/Messages.h:187:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/ASCIIIO.h:4,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:12,
                 from /tmp/arduino-testlib3937030151/test/test.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/Messages.tpp:4:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "elapsedMillis.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/elapsedMillis
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_Audio



					
					
examples/asciiIO

					

						Result: FAIL
					

					

					
					
examples/firmataIO

					

						Result: FAIL
					

					

					
				
				
arduino:megaavr:nona4809 @ 1.8.7

				
Inclusion

				

					Result: FAIL
					
				

				
In file included from /tmp/arduino-testlib3937030151/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:33:87: note: #pragma message: WARNING: LiquidHandlingRobotics::Transport must be defined manually.
 #pragma message("WARNING: LiquidHandlingRobotics::Transport must be defined manually.")
                                                                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:34:86: note: #pragma message: WARNING: LiquidHandlingRobotics::Messager must be defined manually.
 #pragma message("WARNING: LiquidHandlingRobotics::Messager must be defined manually.")
                                                                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:12:0,
                 from /tmp/arduino-testlib3937030151/test/test.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:25:106: note: #pragma message: INFO: LiquidHandlingRobotics::Transport defined to use the ASCII-based transport layer.
 #pragma message("INFO: LiquidHandlingRobotics::Transport defined to use the ASCII-based transport layer.")
                                                                                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:26:105: note: #pragma message: INFO: LiquidHandlingRobotics::Messager defined to use the ASCII-based transport layer.
 #pragma message("INFO: LiquidHandlingRobotics::Messager defined to use the ASCII-based transport layer.")
                                                                                                         ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:41:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:12,
                 from /tmp/arduino-testlib3937030151/test/test.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Protocol/Core.h:23:10: error: 'WDTO_4S' was not declared in this scope
   to4s = WDTO_4S,
          ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Protocol/Core.h:23:10: note: suggested alternative: 'WDTO_1S'
   to4s = WDTO_4S,
          ^~~~~~~
          WDTO_1S
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Protocol/Core.h:24:10: error: 'WDTO_8S' was not declared in this scope
   to8s = WDTO_8S
          ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Protocol/Core.h:24:10: note: suggested alternative: 'WDTO_1S'
   to8s = WDTO_8S
          ^~~~~~~
          WDTO_1S
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:12:0,
                 from /tmp/arduino-testlib3937030151/test/test.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:44:102: note: #pragma message: INFO: LiquidHandlingRobotics::Core defined to use LiquidHandlingRobotics::Messager.
 #pragma message("INFO: LiquidHandlingRobotics::Core defined to use LiquidHandlingRobotics::Messager.")
                                                                                                      ^
In file included from /tmp/arduino-testlib3937030151/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:74:48: note: #pragma message: INFO: Serial logging enabled.
 #pragma message("INFO: Serial logging enabled.")
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:104:113: note: #pragma message: INFO: Messaging system can be instantiated with LHR_instantiateMessaging(transport, messager).
 #pragma message("INFO: Messaging system can be instantiated with LHR_instantiateMessaging(transport, messager).")
                                                                                                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:105:107: note: #pragma message: INFO: Messaging system can be set up with LHR_setupMessaging(transport, messager, core).
 #pragma message("INFO: Messaging system can be set up with LHR_setupMessaging(transport, messager, core).")
                                                                                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:106:95: note: #pragma message: INFO: Messaging system can be connected with LHR_connectMessaging(messager).
 #pragma message("INFO: Messaging system can be connected with LHR_connectMessaging(messager).")
                                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:107:103: note: #pragma message: INFO: Messaging system can be updated with LHR_updateMessaging(transport, messager).
 #pragma message("INFO: Messaging system can be updated with LHR_updateMessaging(transport, messager).")
                                                                                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:126:114: note: #pragma message: INFO: Basic protocol functionality can be instantiated with LHR_instantiateBasics(core, board).
 #pragma message("INFO: Basic protocol functionality can be instantiated with LHR_instantiateBasics(core, board).")
                                                                                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:127:102: note: #pragma message: INFO: Basic protocol functionality can be set up with LHR_setupBasics(core, board).
 #pragma message("INFO: Basic protocol functionality can be set up with LHR_setupBasics(core, board).")
                                                                                                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:128:107: note: #pragma message: INFO: Basic protocol functionality can be connected with LHR_connectBasics(core, board).
 #pragma message("INFO: Basic protocol functionality can be connected with LHR_connectBasics(core, board).")
                                                                                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:129:104: note: #pragma message: INFO: Basic protocol functionality can be updated with LHR_updateBasics(core, board).
 #pragma message("INFO: Basic protocol functionality can be updated with LHR_updateBasics(core, board).")
                                                                                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:130:88: note: #pragma message: INFO: Basic protocol functionality includes the Core protocol subset.
 #pragma message("INFO: Basic protocol functionality includes the Core protocol subset.")
                                                                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:137:97: note: #pragma message: INFO: Basic protocol functionality does not include the Board protocol subset.
 #pragma message("INFO: Basic protocol functionality does not include the Board protocol subset.")
                                                                                                 ^
In file included from /tmp/arduino-testlib3937030151/test/test.ino:2:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:174:99: note: #pragma message: INFO: Linear actuator protocol functionality does not include the pipettor axis.
 #pragma message("INFO: Linear actuator protocol functionality does not include the pipettor axis.")
                                                                                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:184:92: note: #pragma message: INFO: Linear actuator protocol functionality does not include the z axis.
 #pragma message("INFO: Linear actuator protocol functionality does not include the z axis.")
                                                                                            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:195:92: note: #pragma message: INFO: Linear actuator protocol functionality does not include the y axis.
 #pragma message("INFO: Linear actuator protocol functionality does not include the y axis.")
                                                                                            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:207:92: note: #pragma 


					
					
examples/asciiIO

					

						Result: FAIL
					

					

					
					
examples/firmataIO

					

						Result: FAIL
					

					

					
				
				
arduino:samd:mkrwifi1010 @ 1.8.12

				
Inclusion

				

					Result: FAIL
					
					
This library has no main header file so an empty one was created.
					
				

				
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/Messages.h:187:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/ASCIIIO.h:4,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:12,
                 from /tmp/arduino-testlib1805118927/test/test.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/Messages.tpp:4:10: fatal error: avr/wdt.h: No such file or directory
 #include <avr/wdt.h>
          ^~~~~~~~~~~
compilation terminated.
Multiple libraries were found for "elapsedMillis.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/elapsedMillis
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_Audio



					
					
examples/asciiIO

					

						Result: FAIL
					

					

					
					
examples/firmataIO

					

						Result: FAIL
					

					

					
				
				
esp32:esp32:d1_mini32 @ 1.0.6

				
Inclusion

				

					Result: FAIL
					
				

				
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/Messages.h:187:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/ASCIIIO.h:4,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/LiquidHandlingRobotics.h:12,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/StandardLiquidHandlingRobot.h:12,
                 from /tmp/arduino-testlib1720477025/test/test.ino:2:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Liquid_Handling_Robotics/src/Messaging/Messages.tpp:4:21: fatal error: avr/wdt.h: No such file or directory
compilation terminated.
Multiple libraries were found for "elapsedMillis.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/elapsedMillis
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Seeed_Arduino_Audio



					
					
examples/asciiIO

					

						Result: FAIL
					

					

					
					
examples/firmataIO

					

						Result: FAIL