This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.3.1
More details
| Board | Claims compatibility | Inclusion | ESP8266_ONLY |
color_functions |
count_up |
floating_point |
introduction_tour |
special_panes |
|---|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | PASS | PASS | PASS | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | PASS | PASS | PASS | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | PASS | PASS | PASS | PASS | PASS |
Result: PASS
Sketch uses 2300 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 202 bytes (9%) of dynamic memory, leaving 1846 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: PASS
Sketch uses 9056 bytes (28%) of program storage space. Maximum is 32256 bytes. Global variables use 346 bytes (16%) of dynamic memory, leaving 1702 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8404 bytes (26%) of program storage space. Maximum is 32256 bytes. Global variables use 327 bytes (15%) of dynamic memory, leaving 1721 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8748 bytes (27%) of program storage space. Maximum is 32256 bytes. Global variables use 348 bytes (16%) of dynamic memory, leaving 1700 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 14302 bytes (44%) of program storage space. Maximum is 32256 bytes. Global variables use 1964 bytes (95%) of dynamic memory, leaving 84 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
Sketch uses 10328 bytes (32%) of program storage space. Maximum is 32256 bytes. Global variables use 386 bytes (18%) of dynamic memory, leaving 1662 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /tmp/arduino-testlib599410366/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/color_functions/color_functions.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/count_up/count_up.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/floating_point/floating_point.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/introduction_tour/introduction_tour.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:43:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/special_panes/special_panes.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/led_sysdefs.h:55:2: error: #error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
#error "This platform isn't recognized by FastLED... yet. See comments in FastLED/led_sysdefs.h for options."
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp: In member function 'void Lixie_II::start_animation()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: error: 'TCCR1A' was not declared in this scope
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: note: suggested alternative: 'TCB1'
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: error: 'TCCR1B' was not declared in this scope
TCCR1B = 0; // same for TCCR1B
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: note: suggested alternative: 'CRGB'
TCCR1B = 0; // same for TCCR1B
^~~~~~
CRGB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: error: 'TCNT1' was not declared in this scope
TCNT1 = 0; // initialize counter value to 0
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: note: suggested alternative: 'TCB1'
TCNT1 = 0; // initialize counter value to 0
^~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:151:3: error: 'OCR1A' was not declared in this scope
OCR1A = 39999; // = 16000000 / (8 * 50) - 1 (must be <65536)
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: error: 'WGM12' was not declared in this scope
TCCR1B |= (1 << WGM12);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: note: suggested alternative: 'WS2812'
TCCR1B |= (1 << WGM12);
^~~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: error: 'CS12' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: note: suggested alternative: 'WS2812'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: error: 'CS11' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: note: suggested alternative: 'B111'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B111
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: error: 'CS10' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: note: suggested alternative: 'B110'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: error: 'TIMSK1' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: note: suggested alternative: 'TIMERB1'
TIMSK1 |= (1 << OCIE1A);
^~~~~~
TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:19: error: 'OCIE1A' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 4; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 0; unsigned char _MASK = 32; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 0; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp: In member function 'void Lixie_II::start_animation()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: error: 'TCCR1A' was not declared in this scope
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: note: suggested alternative: 'TCB1'
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: error: 'TCCR1B' was not declared in this scope
TCCR1B = 0; // same for TCCR1B
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: note: suggested alternative: 'CRGB'
TCCR1B = 0; // same for TCCR1B
^~~~~~
CRGB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: error: 'TCNT1' was not declared in this scope
TCNT1 = 0; // initialize counter value to 0
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: note: suggested alternative: 'TCB1'
TCNT1 = 0; // initialize counter value to 0
^~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:151:3: error: 'OCR1A' was not declared in this scope
OCR1A = 39999; // = 16000000 / (8 * 50) - 1 (must be <65536)
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: error: 'WGM12' was not declared in this scope
TCCR1B |= (1 << WGM12);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: note: suggested alternative: 'WS2812'
TCCR1B |= (1 << WGM12);
^~~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: error: 'CS12' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: note: suggested alternative: 'WS2812'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: error: 'CS11' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: note: suggested alternative: 'B111'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B111
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: error: 'CS10' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: note: suggested alternative: 'B110'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: error: 'TIMSK1' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: note: suggested alternative: 'TIMERB1'
TIMSK1 |= (1 << OCIE1A);
^~~~~~
TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:19: error: 'OCIE1A' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 4; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 0; unsigned char _MASK = 32; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 0; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp: In member function 'void Lixie_II::start_animation()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: error: 'TCCR1A' was not declared in this scope
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: note: suggested alternative: 'TCB1'
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: error: 'TCCR1B' was not declared in this scope
TCCR1B = 0; // same for TCCR1B
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: note: suggested alternative: 'CRGB'
TCCR1B = 0; // same for TCCR1B
^~~~~~
CRGB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: error: 'TCNT1' was not declared in this scope
TCNT1 = 0; // initialize counter value to 0
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: note: suggested alternative: 'TCB1'
TCNT1 = 0; // initialize counter value to 0
^~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:151:3: error: 'OCR1A' was not declared in this scope
OCR1A = 39999; // = 16000000 / (8 * 50) - 1 (must be <65536)
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: error: 'WGM12' was not declared in this scope
TCCR1B |= (1 << WGM12);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: note: suggested alternative: 'WS2812'
TCCR1B |= (1 << WGM12);
^~~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: error: 'CS12' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: note: suggested alternative: 'WS2812'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: error: 'CS11' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: note: suggested alternative: 'B111'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B111
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: error: 'CS10' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: note: suggested alternative: 'B110'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: error: 'TIMSK1' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: note: suggested alternative: 'TIMERB1'
TIMSK1 |= (1 << OCIE1A);
^~~~~~
TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:19: error: 'OCIE1A' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 4; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 0; unsigned char _MASK = 32; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 0; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp: In member function 'void Lixie_II::start_animation()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: error: 'TCCR1A' was not declared in this scope
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: note: suggested alternative: 'TCB1'
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: error: 'TCCR1B' was not declared in this scope
TCCR1B = 0; // same for TCCR1B
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: note: suggested alternative: 'CRGB'
TCCR1B = 0; // same for TCCR1B
^~~~~~
CRGB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: error: 'TCNT1' was not declared in this scope
TCNT1 = 0; // initialize counter value to 0
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: note: suggested alternative: 'TCB1'
TCNT1 = 0; // initialize counter value to 0
^~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:151:3: error: 'OCR1A' was not declared in this scope
OCR1A = 39999; // = 16000000 / (8 * 50) - 1 (must be <65536)
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: error: 'WGM12' was not declared in this scope
TCCR1B |= (1 << WGM12);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: note: suggested alternative: 'WS2812'
TCCR1B |= (1 << WGM12);
^~~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: error: 'CS12' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: note: suggested alternative: 'WS2812'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: error: 'CS11' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: note: suggested alternative: 'B111'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B111
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: error: 'CS10' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: note: suggested alternative: 'B110'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: error: 'TIMSK1' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: note: suggested alternative: 'TIMERB1'
TIMSK1 |= (1 << OCIE1A);
^~~~~~
TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:19: error: 'OCIE1A' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 4; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 0; unsigned char _MASK = 32; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 0; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp: In member function 'void Lixie_II::start_animation()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: error: 'TCCR1A' was not declared in this scope
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: note: suggested alternative: 'TCB1'
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: error: 'TCCR1B' was not declared in this scope
TCCR1B = 0; // same for TCCR1B
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: note: suggested alternative: 'CRGB'
TCCR1B = 0; // same for TCCR1B
^~~~~~
CRGB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: error: 'TCNT1' was not declared in this scope
TCNT1 = 0; // initialize counter value to 0
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: note: suggested alternative: 'TCB1'
TCNT1 = 0; // initialize counter value to 0
^~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:151:3: error: 'OCR1A' was not declared in this scope
OCR1A = 39999; // = 16000000 / (8 * 50) - 1 (must be <65536)
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: error: 'WGM12' was not declared in this scope
TCCR1B |= (1 << WGM12);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: note: suggested alternative: 'WS2812'
TCCR1B |= (1 << WGM12);
^~~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: error: 'CS12' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: note: suggested alternative: 'WS2812'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: error: 'CS11' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: note: suggested alternative: 'B111'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B111
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: error: 'CS10' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: note: suggested alternative: 'B110'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: error: 'TIMSK1' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: note: suggested alternative: 'TIMERB1'
TIMSK1 |= (1 << OCIE1A);
^~~~~~
TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:19: error: 'OCIE1A' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 4; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 0; unsigned char _MASK = 32; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 0; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp: In member function 'void Lixie_II::start_animation()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: error: 'TCCR1A' was not declared in this scope
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:147:3: note: suggested alternative: 'TCB1'
TCCR1A = 0; // set entire TCCR1A register to 0
^~~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: error: 'TCCR1B' was not declared in this scope
TCCR1B = 0; // same for TCCR1B
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:148:3: note: suggested alternative: 'CRGB'
TCCR1B = 0; // same for TCCR1B
^~~~~~
CRGB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: error: 'TCNT1' was not declared in this scope
TCNT1 = 0; // initialize counter value to 0
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:149:3: note: suggested alternative: 'TCB1'
TCNT1 = 0; // initialize counter value to 0
^~~~~
TCB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:151:3: error: 'OCR1A' was not declared in this scope
OCR1A = 39999; // = 16000000 / (8 * 50) - 1 (must be <65536)
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: error: 'WGM12' was not declared in this scope
TCCR1B |= (1 << WGM12);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:153:19: note: suggested alternative: 'WS2812'
TCCR1B |= (1 << WGM12);
^~~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: error: 'CS12' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:19: note: suggested alternative: 'WS2812'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
WS2812
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: error: 'CS11' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:33: note: suggested alternative: 'B111'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B111
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: error: 'CS10' was not declared in this scope
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:155:47: note: suggested alternative: 'B110'
TCCR1B |= (0 << CS12) | (1 << CS11) | (0 << CS10);
^~~~
B110
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: error: 'TIMSK1' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:3: note: suggested alternative: 'TIMERB1'
TIMSK1 |= (1 << OCIE1A);
^~~~~~
TIMERB1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:157:19: error: 'OCIE1A' was not declared in this scope
TIMSK1 |= (1 << OCIE1A);
^~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastled_avr.h:4:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:54,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTB_DIR' used in nested name specifier
inline static void setOutput() { _DDR::r() |= _MASK; }
~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 4; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static void _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::setOutput() [with unsigned char PIN = 0; unsigned char _MASK = 32; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:114:31: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::init() [with unsigned char DATA_PIN = 0; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:22:42: error: incomplete type '__gen_struct_VPORTC_DIR' used in nested name specifier
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 5; unsigned char _MASK = 4; _PORT = __gen_struct_VPORTB_OUT; _DDR = __gen_struct_VPORTB_DIR; _PIN = __gen_struct_VPORTB_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:126:19: required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with unsigned char DATA_PIN = 5; int T1 = 4; int T2 = 10; int T3 = 6; EOrder RGB_ORDER = (EOrder)66; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 10]'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:802:1: required from here
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h:39:84: error: incomplete type '__gen_struct_VPORTB_OUT' used in nested name specifier
inline static port_ptr_t port() __attribute__ ((always_inline)) { return &_PORT::r(); }
~~~~~~~~^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/fastpin_avr.h: In instantiation of 'static volatile uint8_t* _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port() [with unsigned char PIN = 4; unsigned char _MASK = 64; _PORT = __gen_struct_VPORTC_OUT; _DDR = __gen_struct_VPORTC_DIR; _PIN = __gen_struct_VPORTC_IN; _AVRPIN<PIN, _MASK, _PORT, _DDR, _PIN>::port_ptr_t = volatile unsigned char*; uint8_t = unsigned char]':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/platforms/avr/clockless_trinket.h:362:44: required from 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>
Result: PASS
Sketch uses 12176 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3012 bytes (9%) of dynamic memory, leaving 29756 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: PASS
Sketch uses 25544 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3336 bytes (10%) of dynamic memory, leaving 29432 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 21664 bytes (8%) of program storage space. Maximum is 262144 bytes. Global variables use 3336 bytes (10%) of dynamic memory, leaving 29432 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 25324 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3336 bytes (10%) of dynamic memory, leaving 29432 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 36596 bytes (13%) of program storage space. Maximum is 262144 bytes. Global variables use 3348 bytes (10%) of dynamic memory, leaving 29420 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 26452 bytes (10%) of program storage space. Maximum is 262144 bytes. Global variables use 3336 bytes (10%) of dynamic memory, leaving 29432 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 202378 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13296 bytes (4%) of dynamic memory, leaving 314384 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /tmp/arduino-testlib2487288030/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: FAIL
Result: PASS
Sketch uses 221182 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14240 bytes (4%) of dynamic memory, leaving 313440 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/color_functions/color_functions.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 220438 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14240 bytes (4%) of dynamic memory, leaving 313440 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/count_up/count_up.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 220782 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14240 bytes (4%) of dynamic memory, leaving 313440 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/floating_point/floating_point.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 234826 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14488 bytes (4%) of dynamic memory, leaving 313192 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/introduction_tour/introduction_tour.ino:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
Result: PASS
Sketch uses 222170 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14240 bytes (4%) of dynamic memory, leaving 313440 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/examples/special_panes/special_panes.ino:48:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/FastLED.h:67:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.h:23,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Lixie_II/src/Lixie_II.cpp:8:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/FastLED/src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^