LoRa Node - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

LoRa Node

Version: 1.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	loraABP	loraOtaa	sendWithButton	TinkerkitExample
arduino:avr:uno 1.8.4	No	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp: In function 'void BoardDisableIrq()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp:46:5: error: '__disable_irq' was not d/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp: In function 'void SpiInit(Spi_t*, PinNames, PinNames, PinNames, PinNames)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp:62:13: error: 'class SPIClass' has no member named 'beginSlave'; did you mean 'begin'?
         SPI.beginSlave();
             ^~~~~~~~~~
             begin

examples/TinkerkitExample

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).

examples/loraABP

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp: In function 'void BoardDisableIrq()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp:46:5: error: '__disable_irq' was not d/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp: In function 'void SpiInit(Spi_t*, PinNames, PinNames, PinNames, PinNames)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp:62:13: error: 'class SPIClass' has no member named 'beginSlave'; did you mean 'begin'?
         SPI.beginSlave();
             ^~~~~~~~~~
             begin

examples/loraOtaa

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp: In function 'void BoardDisableIrq()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp:46:5: error: '__disable_irq' was not d/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp: In function 'void SpiInit(Spi_t*, PinNames, PinNames, PinNames, PinNames)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp:62:13: error: 'class SPIClass' has no member named 'beginSlave'; did you mean 'begin'?
         SPI.beginSlave();
             ^~~~~~~~~~
             begin

examples/sendWithButton

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.cpp:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:38:15: error: redeclaration of 'NC'
     NC = (int)0xFFFFFFFF
               ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:22,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.cpp:19:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/TARGET_NANO_RP2040_CONNECT/PinNames.h:78:5: note: previous declaration 'PinName NC'
     NC = (int)0xFFFFFFFF
     ^~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.cpp:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:46:17: error: redeclaration of 'PIN_INPUT'
     PIN_INPUT = 0,
                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:22,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.cpp:19:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:55:5: note: previous declaration 'PinDirection PIN_INPUT'
     PIN_INPUT = 0,
     ^~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.cpp:19:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:47:5: error: redeclaration of 'PIN_OUTPUT'
     PIN_OUTPUT,
     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:22,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.cpp:19:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:56:5: note: previous declaration 'PinDirection PIN_OUTPUT'
     PIN_OUTPUT
     ^~~~~~~~~~

examples/TinkerkitExample

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/TinkerkitExample/TinkerkitExample.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:38:15: error: redeclaration of 'NC'
     NC = (int)0xFFFFFFFF
               ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-D199B85B9214BA5DBCAD849A1DBB6D6F/sketch/TinkerkitExample.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/TARGET_NANO_RP2040_CONNECT/PinNames.h:78:5: note: previous declaration 'PinName NC'
     NC = (int)0xFFFFFFFF
     ^~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/TinkerkitExample/TinkerkitExample.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:46:17: error: redeclaration of 'PIN_INPUT'
     PIN_INPUT = 0,
                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-D199B85B9214BA5DBCAD849A1DBB6D6F/sketch/TinkerkitExample.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:55:5: note: previous declaration 'PinDirection PIN_INPUT'
     PIN_INPUT = 0,
     ^~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/TinkerkitExample/TinkerkitExample.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:47:5: error: redeclaration of 'PIN_OUTPUT'
     PIN_OUTPUT,
     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-D199B85B9214BA5DBCAD849A1DBB6D6F/sketch/TinkerkitExample.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:56:5: note: previous declaration 'PinDirection PIN_OUTPUT'
     PIN_OUTPUT
     ^~~~~~~~~~

examples/loraABP

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/loraABP/loraABP.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:38:15: error: redeclaration of 'NC'
     NC = (int)0xFFFFFFFF
               ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-E2626B7A1C587B24A3744A591C8EF8E0/sketch/loraABP.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/TARGET_NANO_RP2040_CONNECT/PinNames.h:78:5: note: previous declaration 'PinName NC'
     NC = (int)0xFFFFFFFF
     ^~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/loraABP/loraABP.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:46:17: error: redeclaration of 'PIN_INPUT'
     PIN_INPUT = 0,
                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-E2626B7A1C587B24A3744A591C8EF8E0/sketch/loraABP.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:55:5: note: previous declaration 'PinDirection PIN_INPUT'
     PIN_INPUT = 0,
     ^~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/loraABP/loraABP.ino:34:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:47:5: error: redeclaration of 'PIN_OUTPUT'
     PIN_OUTPUT,
     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-E2626B7A1C587B24A3744A591C8EF8E0/sketch/loraABP.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:56:5: note: previous declaration 'PinDirection PIN_OUTPUT'
     PIN_OUTPUT
     ^~~~~~~~~~

examples/loraOtaa

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/loraOtaa/loraOtaa.ino:32:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:38:15: error: redeclaration of 'NC'
     NC = (int)0xFFFFFFFF
               ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-DDF0274CB1953DF6EB622BF5514F4EFF/sketch/loraOtaa.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/TARGET_NANO_RP2040_CONNECT/PinNames.h:78:5: note: previous declaration 'PinName NC'
     NC = (int)0xFFFFFFFF
     ^~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/loraOtaa/loraOtaa.ino:32:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:46:17: error: redeclaration of 'PIN_INPUT'
     PIN_INPUT = 0,
                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-DDF0274CB1953DF6EB622BF5514F4EFF/sketch/loraOtaa.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:55:5: note: previous declaration 'PinDirection PIN_INPUT'
     PIN_INPUT = 0,
     ^~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/loraOtaa/loraOtaa.ino:32:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:47:5: error: redeclaration of 'PIN_OUTPUT'
     PIN_OUTPUT,
     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-DDF0274CB1953DF6EB622BF5514F4EFF/sketch/loraOtaa.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:56:5: note: previous declaration 'PinDirection PIN_OUTPUT'
     PIN_OUTPUT
     ^~~~~~~~~~

examples/sendWithButton

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/sendWithButton/sendWithButton.ino:35:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:38:15: error: redeclaration of 'NC'
     NC = (int)0xFFFFFFFF
               ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:21:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-1FCCC4661E8E6F1950B2BE58B4756C3D/sketch/sendWithButton.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/TARGET_NANO_RP2040_CONNECT/PinNames.h:78:5: note: previous declaration 'PinName NC'
     NC = (int)0xFFFFFFFF
     ^~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/sendWithButton/sendWithButton.ino:35:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:46:17: error: redeclaration of 'PIN_INPUT'
     PIN_INPUT = 0,
                 ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-1FCCC4661E8E6F1950B2BE58B4756C3D/sketch/sendWithButton.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:55:5: note: previous declaration 'PinDirection PIN_INPUT'
     PIN_INPUT = 0,
     ^~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.h:32:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/LoRaNode.h:26,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/sendWithButton/sendWithButton.ino:35:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/system/gpio.h:47:5: error: redeclaration of 'PIN_OUTPUT'
     PIN_OUTPUT,
     ^~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pinmode_arduino.h:24:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:26,
                 from /tmp/arduino-sketch-1FCCC4661E8E6F1950B2BE58B4756C3D/sketch/sendWithButton.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/targets/TARGET_RASPBERRYPI/TARGET_RP2040/PeripheralNames.h:56:5: note: previous declaration 'PinDirection PIN_OUTPUT'
     PIN_OUTPUT
     ^~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).

examples/TinkerkitExample

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).

examples/loraABP

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp: In function 'void BoardDisableIrq()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp:46:5: error: '__disable_irq' was not d/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp: In function 'void SpiInit(Spi_t*, PinNames, PinNames, PinNames, PinNames)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp:62:13: error: 'class SPIClassMegaAVR' has no member named 'beginSlave'; did you mean 'begin'?
         SPI.beginSlave();
             ^~~~~~~~~~
             begin
cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp:55:9: error: '__enable_irq' was not declared in this scope
         __enable_irq( );
         ^~~~~~~~~~~~

examples/loraOtaa

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp: In function 'void BoardDisableIrq()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp:46:5: error: '__disable_irq' was not d/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp: In function 'void SpiInit(Spi_t*, PinNames, PinNames, PinNames, PinNames)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp:62:13: error: 'class SPIClassMegaAVR' has no member named 'beginSlave'; did you mean 'begin'?
         SPI.beginSlave();
             ^~~~~~~~~~
             begin

examples/sendWithButton

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp: In function 'void BoardDisableIrq()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp:46:5: error: '__disable_irq' was not d/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp: In function 'void SpiInit(Spi_t*, PinNames, PinNames, PinNames, PinNames)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/spi-board.cpp:62:13: error: 'class SPIClassMegaAVR' has no member named 'beginSlave'; did you mean 'begin'?
         SPI.beginSlave();
             ^~~~~~~~~~
             begin
cli-datadir/user/libraries/LoRa_Node/src/boards/arduino/board.cpp:55:9: error: '__enable_irq' was not declared in this scope
         __enable_irq( );
         ^~~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).

examples/TinkerkitExample

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).

examples/loraABP

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).

examples/loraOtaa

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).

examples/sendWithButton

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).

examples/TinkerkitExample

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/TinkerkitExample/TinkerkitExample.ino:48:20: error: 'A2' was not declared in this scope
 const int button = A2;
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/TinkerkitExample/TinkerkitExample.ino: In function 'void readMsg(unsigned char*, int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/TinkerkitExample/TinkerkitExample.ino:105:26: error: 'tone' was not declared in this scope
     tone(buzzer, 262, 500);
                          ^

examples/loraABP

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).

examples/loraOtaa

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).

examples/sendWithButton

Result: FAIL

WARNING: library LoRa_Node claims to run on nrf52 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/LoRa_Node/examples/sendWithButton/sendWithButton.ino:55:20: error: 'A2' was not declared in this scope
 const int button = A2;
                    ^