This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.1.0
More details
| Board | Claims compatibility | Inclusion | BIST |
DigitalReadSerial |
blink |
calculator |
AnalogReadSerial |
|---|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No ⚠️ | PASS | FAIL | FAIL | PASS | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | FAIL | PASS | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | FAIL | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | FAIL | FAIL | PASS | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | FAIL | PASS | PASS | FAIL |
Result: PASS
WARNING: library M10Examples claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino:21:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type
uint16_t (*read) (uint8_t index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:17: error: expected ';' at end of member declaration
void (*end)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:19: error: '__reentrant' does not name a type
void (*end)() __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:28,
from /tmp/arduino-sketch-3C19E4AC5ED156B2718503564BA9F073/sketch/AnalogReadSerial.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:47:25: error: expected unqualified-id before 'volatile'
extern const ADC_STRUCT ADC;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:47:25: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:47:25: error: expected ')' before 'volatile'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino:40:7: error: request for member 'begin' in '*(volatile uint16_t*)120', which is of non-class type 'volatile uint16_t {aka volatile unsigned int}'
ADC.begin();
^~~~~
Result: FAIL
WARNING: library M10SD claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library M10SRAM claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library M10CODEC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
WARNING: library M10DTMF claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:39: error: expected ';' at end of member declaration
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:41: error: '__reentrant' does not name a type
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:61: error: expected ';' at end of member declaration
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:63: error: '__reentrant' does not name a type
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:68: error: expected ';' at end of member declaration
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:70: error: '__reentrant' does not name a type
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:19: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:45: error: expected ';' at end of member declaration
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:47: error: '__reentrant' does not name a type
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:33: error: expected ';' at end of member declaration
uint8_t (*read) (uint32_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:35: error: '__reentrant' does not name a type
uint8_t (*read) (uint32_t addr) __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:19: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:35: error: expected ';' at end of member declaration
uint16_t (*regRead)(uint8_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:37: error: '__reentrant' does not name a type
uint16_t (*regRead)(uint8_t addr) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:48: error: expected ';' at end of member declaration
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:50: error: '__reentrant' does not name a type
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:26: error: expected ';' at end of member declaration
uint16_t (*sampleRead)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:28: error: '__reentrant' does not name a type
uint16_t (*sampleRead)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:36: error: expected ';' at end of member declaration
void (*sampleWrite)(uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:38: error: '__reentrant' does not name a type
void (*sampleWrite)(uint16_t data) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:45: error: expected ';' at end of member declaration
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:47: error: '__reentrant' does not name a type
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:40: error: expected ';' at end of member declaration
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:42: error: '__reentrant' does not name a type
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:38: error: expected ';' at end of member declaration
void (*outputVolume)(uint8_t volume) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:40: error: '__reentrant' does not name a type
void (*outputVolume)(uint8_t volume) __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type
uint16_t (*read) (uint8_t index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:17: error: expected ';' at end of member declaration
void (*end)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:19: error: '__reentrant' does not name a type
void (*end)() __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino7/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:28,
from /tmp/arduino-sketch-67C72FB8E35441A5E6F781CF898CFEEB/sketch/BIST.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:47:25: error: expected unqualified-id before 'volatile'
extern const ADC_STRUCT ADC;
^
/home/e
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:99:3: error: 'CHIP_ID_DATA_CSR' was not declared in this scope
CHIP_ID_DATA_CSR = 0xff;
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:100:3: error: 'single_nop_delay' was not declared in this scope
single_nop_delay();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:124:11: error: 'MCU_REVISION' was not declared in this scope
t = MCU_REVISION;
^~~~~~~~~~~~
Result: PASS
Sketch uses 924 bytes (2%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 3154 bytes (9%) of program storage space. Maximum is 32256 bytes. Global variables use 1722 bytes (84%) of dynamic memory, leaving 326 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
WARNING: library M10Examples claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino:21:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*begin)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint16_t (*read) (uint8_t index) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:17: error: expected ';' at end of member declaration
void (*end)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:19: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*end)() __reentrant;
^~~~~~~~~~~
__restrict
Result: FAIL
WARNING: library M10SD claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library M10SRAM claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library M10CODEC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library M10DTMF claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:231:3: error: conflicting declaration 'typedef struct DIR DIR'
} DIR;
^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/platform.h:26:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/FileHandle.h:25,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/macros.h:41,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/variants/NANO_RP2040_CONNECT/pins_arduino.h:2,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/Arduino.h:76,
from /tmp/arduino-sketch-67C72FB8E35441A5E6F781CF898CFEEB/sketch/BIST.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/cores/arduino/mbed/platform/include/platform/mbed_retarget.h:211:25: note: previous declaration as 'typedef struct DIR_impl DIR'
typedef struct DIR_impl DIR;
^~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:39: error: expected ';' at end of member declaration
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:41: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:61: error: expected ';' at end of member declaration
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:63: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:68: error: expected ';' at end of member declaration
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:70: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^~~~~~~~~~~
__restrict
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:19: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*begin)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:45: error: expected ';' at end of member declaration
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:47: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:33: error: expected ';' at end of member declaration
uint8_t (*read) (uint32_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:35: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*read) (uint32_t addr) __reentrant;
^~~~~~~~~~~
__restrict
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:19: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*begin)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:35: error: expected ';' at end of member declaration
uint16_t (*regRead)(uint8_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:37: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint16_t (*regRead)(uint8_t addr) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:48: error: expected ';' at end of member declaration
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:50: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:26: error: expected ';' at end of member declaration
uint16_t (*sampleRead)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:28: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint16_t (*sampleRead)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:36: error: expected ';' at end of member declaration
void (*sampleWrite)(uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:38: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*sampleWrite)(uint16_t data) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:45: error: expected ';' at end of member declaration
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:47: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:40: error: expected ';' at end of member declaration
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:42: error: '__reentrant' does not name a type; did you mean '__restrict'?
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:38: error: expected ';' at end of member declaration
void (*outputVolume)(uint8_t volume) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M1
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:99:3: error: 'CHIP_ID_DATA_CSR' was not declared in this scope
CHIP_ID_DATA_CSR = 0xff;
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:99:3: note: suggested alternative: 'SPI_SSPDR_DATA_LSB'
CHIP_ID_DATA_CSR = 0xff;
^~~~~~~~~~~~~~~~
SPI_SSPDR_DATA_LSB
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:100:3: error: 'single_nop_delay' was not declared in this scope
single_nop_delay();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:124:11: error: 'MCU_REVISION' was not declared in this scope
t = MCU_REVISION;
^~~~~~~~~~~~
Result: PASS
Sketch uses 79132 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 79920 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44872 bytes (16%) of dynamic memory, leaving 225464 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library M10Examples claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino:21:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type
uint16_t (*read) (uint8_t index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:17: error: expected ';' at end of member declaration
void (*end)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:19: error: '__reentrant' does not name a type
void (*end)() __reentrant;
^~~~~~~~~~~
Result: FAIL
WARNING: library M10SD claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library M10SRAM claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library M10CODEC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
WARNING: library M10DTMF claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:39: error: expected ';' at end of member declaration
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:41: error: '__reentrant' does not name a type
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:61: error: expected ';' at end of member declaration
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:63: error: '__reentrant' does not name a type
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:68: error: expected ';' at end of member declaration
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:70: error: '__reentrant' does not name a type
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:19: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:45: error: expected ';' at end of member declaration
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:47: error: '__reentrant' does not name a type
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:33: error: expected ';' at end of member declaration
uint8_t (*read) (uint32_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:35: error: '__reentrant' does not name a type
uint8_t (*read) (uint32_t addr) __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:19: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:35: error: expected ';' at end of member declaration
uint16_t (*regRead)(uint8_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:37: error: '__reentrant' does not name a type
uint16_t (*regRead)(uint8_t addr) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:48: error: expected ';' at end of member declaration
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:50: error: '__reentrant' does not name a type
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:26: error: expected ';' at end of member declaration
uint16_t (*sampleRead)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:28: error: '__reentrant' does not name a type
uint16_t (*sampleRead)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:36: error: expected ';' at end of member declaration
void (*sampleWrite)(uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:38: error: '__reentrant' does not name a type
void (*sampleWrite)(uint16_t data) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:45: error: expected ';' at end of member declaration
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:47: error: '__reentrant' does not name a type
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:40: error: expected ';' at end of member declaration
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:42: error: '__reentrant' does not name a type
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:38: error: expected ';' at end of member declaration
void (*outputVolume)(uint8_t volume) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:40: error: '__reentrant' does not name a type
void (*outputVolume)(uint8_t volume) __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type
uint16_t (*read) (uint8_t index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:17: error: expected ';' at end of member declaration
void (*end)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:19: error: '__reentrant' does not name a type
void (*end)() __reentrant;
^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10DTMF/src/M10DTMF.h:29:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10DTMF/src/M10DTMF.h:29:21: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10DTMF/src/M10DTMF.h:30:20: error: expected ';' at end of member declaration
void (*reinit)() __reentrant;
^
/home/ec2-user/arduin
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:99:3: error: 'CHIP_ID_DATA_CSR' was not declared in this scope
CHIP_ID_DATA_CSR = 0xff;
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:100:3: error: 'single_nop_delay' was not declared in this scope
single_nop_delay();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:124:11: error: 'MCU_REVISION' was not declared in this scope
t = MCU_REVISION;
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:124:11: note: suggested alternative: 'USB_VERSION'
t = MCU_REVISION;
^~~~~~~~~~~~
USB_VERSION
Result: PASS
Sketch uses 1118 bytes (2%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 4162 bytes (8%) of program storage space. Maximum is 49152 bytes. Global variables use 1607 bytes (26%) of dynamic memory, leaving 4537 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library M10Examples claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino:21:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*begin)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint16_t (*read) (uint8_t index) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:17: error: expected ';' at end of member declaration
void (*end)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:19: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*end)() __reentrant;
^~~~~~~~~~~
__restrict
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21.h:69:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd.h:105,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:38,
from /tmp/arduino-sketch-3C19E4AC5ED156B2718503564BA9F073/sketch/AnalogReadSerial.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:417:38: error: expected ')' before '*' token
#define ADC ((Adc *)0x42004000UL) /**< \brief (ADC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:47:25: note: in expansion of macro 'ADC'
extern const ADC_STRUCT ADC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL/samd21/include/samd21g18a.h:417:38: error: expected ')' before '*' token
#define ADC ((Adc *)0x42004000UL) /**< \brief (ADC) APB Base Address */
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:47:25: note: in expansion of macro 'ADC'
extern const ADC_STRUCT ADC;
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino:40:7: error: request for member 'begin' in '(Adc*)1107312640', which is of pointer type 'Adc*' (maybe you meant to use '->' ?)
ADC.begin();
^~~~~
Result: FAIL
WARNING: library M10SD claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library M10SRAM claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library M10CODEC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
WARNING: library M10DTMF claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:39: error: expected ';' at end of member declaration
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:41: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:61: error: expected ';' at end of member declaration
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:63: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:68: error: expected ';' at end of member declaration
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:70: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^~~~~~~~~~~
__restrict
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:19: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*begin)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:45: error: expected ';' at end of member declaration
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:47: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:33: error: expected ';' at end of member declaration
uint8_t (*read) (uint32_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:35: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*read) (uint32_t addr) __reentrant;
^~~~~~~~~~~
__restrict
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:19: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*begin)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:35: error: expected ';' at end of member declaration
uint16_t (*regRead)(uint8_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:37: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint16_t (*regRead)(uint8_t addr) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:48: error: expected ';' at end of member declaration
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:50: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:26: error: expected ';' at end of member declaration
uint16_t (*sampleRead)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:28: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint16_t (*sampleRead)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:36: error: expected ';' at end of member declaration
void (*sampleWrite)(uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:38: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*sampleWrite)(uint16_t data) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:45: error: expected ';' at end of member declaration
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:47: error: '__reentrant' does not name a type; did you mean '__restrict'?
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:40: error: expected ';' at end of member declaration
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:42: error: '__reentrant' does not name a type; did you mean '__restrict'?
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:38: error: expected ';' at end of member declaration
void (*outputVolume)(uint8_t volume) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:40: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*outputVolume)(uint8_t volume) __reentrant;
^~~~~~~~~~~
__restrict
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type; did you mean '__restrict'?
void (*begin)() __reentrant;
^~~~~~~~~~~
__restrict
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type; did you mean '__restrict'?
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:99:3: error: 'CHIP_ID_DATA_CSR' was not declared in this scope
CHIP_ID_DATA_CSR = 0xff;
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:100:3: error: 'single_nop_delay' was not declared in this scope
single_nop_delay();
^~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:124:11: error: 'MCU_REVISION' was not declared in this scope
t = MCU_REVISION;
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:124:11: note: suggested alternative: 'DSU_DID_REVISION'
t = MCU_REVISION;
^~~~~~~~~~~~
DSU_DID_REVISION
Result: PASS
Sketch uses 12200 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 14020 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 4428 bytes (13%) of dynamic memory, leaving 28340 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library M10Examples claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 197768 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13092 bytes (3%) of dynamic memory, leaving 314588 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/AnalogReadSerial/AnalogReadSerial.ino:21:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:17: error: expected ';' at end of member declaration
void (*end)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:19: error: '__reentrant' does not name a type
void (*end)() __reentrant;
^
Result: FAIL
WARNING: library M10SD claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library M10SRAM claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library M10CODEC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library M10ADC claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library M10DTMF claims to run on FP51 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:38:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:39: error: expected ';' at end of member declaration
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:359:41: error: '__reentrant' does not name a type
uint8_t (*fopen)(const uint8_t* path) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:61: error: expected ';' at end of member declaration
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:360:63: error: '__reentrant' does not name a type
uint8_t (*fread)(uint8_t* buff, uint16_t btr, uint16_t* br) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:68: error: expected ';' at end of member declaration
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SD/src/M10SD.h:361:70: error: '__reentrant' does not name a type
uint8_t (*fwrite)(const uint8_t* buff, uint16_t btw, uint16_t* bw) __reentrant;
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:39:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:46:19: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:45: error: expected ';' at end of member declaration
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:47:47: error: '__reentrant' does not name a type
void (*_write)(uint32_t addr, uint8_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:33: error: expected ';' at end of member declaration
uint8_t (*read) (uint32_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10SRAM/src/M10SRAM.h:48:35: error: '__reentrant' does not name a type
uint8_t (*read) (uint32_t addr) __reentrant;
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:40:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:17: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:144:19: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:35: error: expected ';' at end of member declaration
uint16_t (*regRead)(uint8_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:145:37: error: '__reentrant' does not name a type
uint16_t (*regRead)(uint8_t addr) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:48: error: expected ';' at end of member declaration
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:146:50: error: '__reentrant' does not name a type
void (*regWrite) (uint8_t addr, uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:26: error: expected ';' at end of member declaration
uint16_t (*sampleRead)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:147:28: error: '__reentrant' does not name a type
uint16_t (*sampleRead)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:36: error: expected ';' at end of member declaration
void (*sampleWrite)(uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:148:38: error: '__reentrant' does not name a type
void (*sampleWrite)(uint16_t data) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:45: error: expected ';' at end of member declaration
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:149:47: error: '__reentrant' does not name a type
uint8_t (*sampleCompress)(int16_t pcm_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:40: error: expected ';' at end of member declaration
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:150:42: error: '__reentrant' does not name a type
int16_t (*sampleExpand)(uint8_t u_val) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:38: error: expected ';' at end of member declaration
void (*outputVolume)(uint8_t volume) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10CODEC/src/M10CODEC.h:151:40: error: '__reentrant' does not name a type
void (*outputVolume)(uint8_t volume) __reentrant;
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:41:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:38:51: error: expected initializer before '__reentrant'
extern uint16_t analogRead(uint8_t channel_index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:41:21: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:36: error: expected ';' at end of member declaration
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:42:38: error: '__reentrant' does not name a type
uint16_t (*read) (uint8_t index) __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:17: error: expected ';' at end of member declaration
void (*end)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10ADC/src/M10ADC.h:44:19: error: '__reentrant' does not name a type
void (*end)() __reentrant;
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/BIST/BIST.ino:42:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10DTMF/src/M10DTMF.h:29:19: error: expected ';' at end of member declaration
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10DTMF/src/M10DTMF.h:29:21: error: '__reentrant' does not name a type
void (*begin)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10DTMF/src/M10DTMF.h:30:20: error: expected ';' at end of member declaration
void (*reinit)() __reentrant;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10DTMF/src/M10DTMF.h:30:22: error: '__reentrant' does not name a type
void (*reinit)() __reentrant;
^
/home/ec2-user/arduino-testlib/cl
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:99:3: error: 'CHIP_ID_DATA_CSR' was not declared in this scope
CHIP_ID_DATA_CSR = 0xff;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:100:20: error: 'single_nop_delay' was not declared in this scope
single_nop_delay();
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/M10Examples/examples/DigitalReadSerial/DigitalReadSerial.ino:124:11: error: 'MCU_REVISION' was not declared in this scope
t = MCU_REVISION;
^
Result: PASS
Sketch uses 198834 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13248 bytes (4%) of dynamic memory, leaving 314432 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 205934 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 14848 bytes (4%) of dynamic memory, leaving 312832 bytes for local variables. Maximum is 327680 bytes.