MAX77650-Arduino-Library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MAX77650-Arduino-Library

Version: 1.0.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	MAX77650_PMIC_LED_example	MAX77650_PowerHold_example	MAX77650_SIMO_Buck_Boost_example	MAX77650_analog_multiplexer_example	MAX77650_complete_init_example
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes ⚠️	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_PMIC_LED_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_PowerHold_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_SIMO_Buck_Boost_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~

examples/MAX77650_analog_multiplexer_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~

examples/MAX77650_complete_init_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:69:25: error: 'P2_3' was not declared in this scope
 #define MAX77650_IRQpin P2_3 //Pin 19 -> connected to MAX77650 IRQ output pin (C2)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:180:11: note: in expansion of macro 'MAX77650_IRQpin'
   pinMode(MAX77650_IRQpin, INPUT_PULLUP);
           ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:69:25: note: suggested alternative: '._3'
 #define MAX77650_IRQpin P2_3 //Pin 19 -> connected to MAX77650 IRQ output pin (C2)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:180:11: note: in expansion of macro 'MAX77650_IRQpin'
   pinMode(MAX77650_IRQpin, INPUT_PULLUP);
           ^~~~~~~~~~~~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_PMIC_LED_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_PowerHold_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_SIMO_Buck_Boost_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: note: suggested alternative: 'PWM_2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~

examples/MAX77650_analog_multiplexer_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: note: suggested alternative: 'PWM_2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~

examples/MAX77650_complete_init_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: note: suggested alternative: 'PWM_2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:69:25: error: 'P2_3' was not declared in this scope
 #define MAX77650_IRQpin P2_3 //Pin 19 -> connected to MAX77650 IRQ output pin (C2)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:180:11: note: in expansion of macro 'MAX77650_IRQpin'
   pinMode(MAX77650_IRQpin, INPUT_PULLUP);
           ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:69:25: note: suggested alternative: 'PWM_3'
 #define MAX77650_IRQpin P2_3 //Pin 19 -> connected to MAX77650 IRQ output pin (C2)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:180:11: note: in expansion of macro 'MAX77650_IRQpin'
   pinMode(MAX77650_IRQpin, INPUT_PULLUP);
           ^~~~~~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_PMIC_LED_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_PowerHold_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_SIMO_Buck_Boost_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~

examples/MAX77650_analog_multiplexer_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~

examples/MAX77650_complete_init_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:69:25: error: 'P2_3' was not declared in this scope
 #define MAX77650_IRQpin P2_3 //Pin 19 -> connected to MAX77650 IRQ output pin (C2)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:180:11: note: in expansion of macro 'MAX77650_IRQpin'
   pinMode(MAX77650_IRQpin, INPUT_PULLUP);
           ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:69:25: note: suggested alternative: '._3'
 #define MAX77650_IRQpin P2_3 //Pin 19 -> connected to MAX77650 IRQ output pin (C2)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:180:11: note: in expansion of macro 'MAX77650_IRQpin'
   pinMode(MAX77650_IRQpin, INPUT_PULLUP);
           ^~~~~~~~~~~~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_PMIC_LED_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_PowerHold_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: error: 'Wire1' was not declared in this scope
      Wire1.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:70:6: note: suggested alternative: 'Wire'
      Wire1.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();
      ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: note: suggested alternative: 'Wire'
      Wire2.begin();
      ^~~~~
      Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:88:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: error: 'Wire1' was not declared in this scope
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:115:4: note: suggested alternative: 'Wire'
    Wire1.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: note: suggested alternative: 'Wire'
    Wire2.beginTransmission(MAX77650_ADDR);
    ^~~~~
    Wire

examples/MAX77650_SIMO_Buck_Boost_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~

examples/MAX77650_analog_multiplexer_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~

examples/MAX77650_complete_init_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: note: suggested alternative: '._2'
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:69:25: error: 'P2_3' was not declared in this scope
 #define MAX77650_IRQpin P2_3 //Pin 19 -> connected to MAX77650 IRQ output pin (C2)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:180:11: note: in expansion of macro 'MAX77650_IRQpin'
   pinMode(MAX77650_IRQpin, INPUT_PULLUP);
           ^~~~~~~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();  
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^

examples/MAX77650_PMIC_LED_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();  
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^

examples/MAX77650_PowerHold_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'boolean MAX77650_init()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:72:6: error: 'Wire2' was not declared in this scope
      Wire2.begin();  
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'int MAX77650_read_register(int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:97:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp: In function 'byte MAX77650_write_register(int, int)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/MAX77650-Arduino-Library.cpp:121:4: error: 'Wire2' was not declared in this scope
    Wire2.beginTransmission(MAX77650_ADDR);
    ^

examples/MAX77650_SIMO_Buck_Boost_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_SIMO_Buck_Boost_example/MAX77650_SIMO_Buck_Boost_example.ino:74:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^

examples/MAX77650_analog_multiplexer_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:66:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_analog_multiplexer_example/MAX77650_analog_multiplexer_example.ino:71:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^

examples/MAX77650_complete_init_example

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:68:23: error: 'P2_2' was not declared in this scope
 #define MAX77650_PHLD P2_2   //Pin 18 -> connected to MAX77650 power hold input pin (A1)
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:78:11: note: in expansion of macro 'MAX77650_PHLD'
   pinMode(MAX77650_PHLD, OUTPUT);          //configure pin as output
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:69:25: error: 'P2_3' was not declared in this scope
 #define MAX77650_IRQpin P2_3 //Pin 19 -> connected to MAX77650 IRQ output pin (C2)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MAX77650-Arduino-Library/examples/MAX77650_complete_init_example/MAX77650_complete_init_example.ino:180:11: note: in expansion of macro 'MAX77650_IRQpin'
   pinMode(MAX77650_IRQpin, INPUT_PULLUP);
           ^