MCCI Catena SCD30 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MCCI Catena SCD30

Version: 0.2.0
More details

Compatibility matrix

Board Claims compatibility Inclusion 
scd30_simple
 
header-test
 
scd30_lorawan
arduino:avr:uno
1.8.4 		Yes ⚠️ FAIL FAIL FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		Yes PASS FAIL PASS FAIL
arduino:megaavr:nona4809
1.8.7 		Yes ⚠️ FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		Yes PASS FAIL PASS FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL 

In file included from /private/tmp/arduino-testlib1516280318/test/test.ino:1:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:20:10: fatal error: cstdint: No such file or directory
 #include <cstdint>
          ^~~~~~~~~
compilation terminated.

examples/header-test

Result: FAIL 

In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/header-test/header-test.ino:22:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:20:10: fatal error: cstdint: No such file or directory
 #include <cstdint>
          ^~~~~~~~~
compilation terminated.

examples/scd30_lorawan

Result: FAIL 

/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:17:3: error: #error "This sketch targets the MCCI Catena 4801"
 # error "This sketch targets the MCCI Catena 4801"
   ^~~~~
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.h:29:0,
                 from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:21:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena.h:76:3: error: #error Architecture not supported
 # error Architecture not supported
   ^~~~~
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.h:30:0,
                 from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:21:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena_Led.h:40:10: fatal error: type_traits: No such file or directory
 #include <type_traits>
          ^~~~~~~~~~~~~
compilation terminated.

examples/scd30_simple

Result: FAIL 

In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:16:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:20:10: fatal error: cstdint: No such file or directory
 #include <cstdint>
          ^~~~~~~~~
compilation terminated.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS 

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/header-test

Result: PASS 

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/scd30_lorawan

Result: FAIL 

WARNING: library MCCI_Catena_Arduino_Platform claims to run on samd, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library MCCI_FRAM_I2C claims to run on samd, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:17:3: error: #error "This sketch targets the MCCI Catena 4801"
 # error "This sketch targets the MCCI Catena 4801"
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena.h:76:3: error: #error Architecture not supported
 # error Architecture not supported
   ^~~~~

examples/scd30_simple

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:86:17: error: 'D5' was not declared in this scope
         pinMode(D5, OUTPUT);
                 ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:86:17: note: suggested alternative: 'A5'
         pinMode(D5, OUTPUT);
                 ^~
                 A5
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:90:17: error: 'D11' was not declared in this scope
         pinMode(D11, OUTPUT);
                 ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:90:17: note: suggested alternative: 'B11'
         pinMode(D11, OUTPUT);
                 ^~~
                 B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:94:17: error: 'D10' was not declared in this scope
         pinMode(D10, OUTPUT);
                 ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:94:17: note: suggested alternative: 'B10'
         pinMode(D10, OUTPUT);
                 ^~~
                 B10
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:98:24: error: 'RCC' was not declared in this scope
         Serial.println(RCC->CSR >> 24, HEX);
                        ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:99:21: error: 'RCC_CSR_RMVF' was not declared in this scope
         RCC->CSR |= RCC_CSR_RMVF;
                     ^~~~~~~~~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL 

In file included from /tmp/arduino-testlib722157351/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:20:10: fatal error: cstdint: No such file or directory
 #include <cstdint>
          ^~~~~~~~~
compilation terminated.

examples/header-test

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/header-test/header-test.ino:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:20:10: fatal error: cstdint: No such file or directory
 #include <cstdint>
          ^~~~~~~~~
compilation terminated.

examples/scd30_lorawan

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:17:3: error: #error "This sketch targets the MCCI Catena 4801"
 # error "This sketch targets the MCCI Catena 4801"
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena.h:76:3: error: #error Architecture not supported
 # error Architecture not supported
   ^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.h:30:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena_Led.h:40:10: fatal error: type_traits: No such file or directory
 #include <type_traits>
          ^~~~~~~~~~~~~
compilation terminated.

examples/scd30_simple

Result: FAIL 

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:20:10: fatal error: cstdint: No such file or directory
 #include <cstdint>
          ^~~~~~~~~
compilation terminated.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL 

In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:22:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:82:20: error: expected ')' before '&' token
     cSCD30(TwoWire &wire, Address Address = Address::SCD30, Pin_t pinReady = -1)
                    ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:22:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:290:5: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
     TwoWire *m_wire;                /// pointer to bus to be used for this device
     ^~~~~~~
     TwoWire_h
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h: In member function 'uint32_t McciCatenaScd30::cSCD30::getMsToNextMeasurement() const':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:254:26: error: 'millis' was not declared in this scope
         auto const now = millis();
                          ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:254:26: note: suggested alternative: 'malloc'
         auto const now = millis();
                          ^~~~~~
                          malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::begin()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:29:15: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     if (this->m_wire == nullptr)
               ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:35:11: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     this->m_wire->begin();
           ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:41:26: error: 'millis' was not declared in this scope
         this->m_tReady = millis() + this->m_ProductInfo.MeasurementInterval * 1000;
                          ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:41:26: note: suggested alternative: 'malloc'
         this->m_tReady = millis() + this->m_ProductInfo.MeasurementInterval * 1000;
                          ^~~~~~
                          malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::readUint16(McciCatenaScd30::cSCD30::Command, uint16_t&)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:206:9: error: 'delay' was not declared in this scope
         delay(this->kReadDelayMs);
         ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::setMeasurementInterval(uint16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:238:9: error: 'delay' was not declared in this scope
         delay(this->kCommandRecoveryMs);
         ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::activateAutomaticSelfCalbration(bool)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:265:9: error: 'delay' was not declared in this scope
         delay(this->kCommandRecoveryMs);
         ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::writeCommandBuffer(const uint8_t*, size_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:299:11: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     this->m_wire->beginTransmission(std::uint8_t(this->m_address));
           ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:300:15: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     if (this->m_wire->write(pBuffer, nBuffer) != nBuffer)
               ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:302:15: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     if (this->m_wire->endTransmission() != 0)
               ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::readResponse(uint8_t*, size_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:321:23: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     nReadFrom = this->m_wire->requestFrom(std::uint8_t(addr), /* bytes */ std::uint8_t(nBuf));
                       ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:327:21: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     nResult = this->m_wire->available();
                     ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:332:24: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
         buf[i] = this->m_wire->read();
                        ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::startContinuousMeasurementCommon(uint16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:352:9: error: 'delay' was not declared in this scope
         delay(this->kCommandRecoveryMs);
         ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:355:26: error: 'millis' was not declared in this scope
         this->m_tReady = millis() + this->m_ProductInfo.MeasurementInterval * 1000;
                          ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:355:26: note: suggested alternative: 'malloc'
         this->m_tReady = millis() + this->m_ProductInfo.MeasurementInterval * 1000;
                          ^~~~~~
                          malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::queryReady(bool&)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:381:24: error: 'millis' was not declared in this scope
     if ((std::int32_t)(millis() - this->m_tReady) < 0)
                        ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:381:24: note: suggested alternative: 'malloc'
     if ((std::int32_t)(millis() - this->m_tReady) < 0)
                        ^~~~~~
                        malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:396:30: error: 'millis' was not declared in this scope
             this->m_tReady = millis() + 1000;
                              ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:396:30: note: suggested alternative: 'malloc'
             this->m_tReady = millis() + 1000;
                              ^~~~~~
                              malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:414:34: error: 'millis' was not declared in this scope
                 this->m_tReady = millis() + 1000;
                                  ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:414:34: note: suggested alternative: 'malloc'
                 this->m_tReady = millis() + 1000;
                                  ^~~~~~
                                  malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:425:30: error: 'millis' was not declared in this scope
             this->m_tReady = millis() + 100;
                              ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:425:30: note: suggested alternative: 'malloc'
             this->m_tReady = millis() + 100;
                              ^~~~~~
                              malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_

examples/header-test

Result: FAIL 

In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:22:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:82:20: error: expected ')' before '&' token
     cSCD30(TwoWire &wire, Address Address = Address::SCD30, Pin_t pinReady = -1)
                    ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:22:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:290:5: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
     TwoWire *m_wire;                /// pointer to bus to be used for this device
     ^~~~~~~
     TwoWire_h
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h: In member function 'uint32_t McciCatenaScd30::cSCD30::getMsToNextMeasurement() const':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:254:26: error: 'millis' was not declared in this scope
         auto const now = millis();
                          ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:254:26: note: suggested alternative: 'malloc'
         auto const now = millis();
                          ^~~~~~
                          malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::begin()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:29:15: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     if (this->m_wire == nullptr)
               ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:35:11: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     this->m_wire->begin();
           ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:41:26: error: 'millis' was not declared in this scope
         this->m_tReady = millis() + this->m_ProductInfo.MeasurementInterval * 1000;
                          ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:41:26: note: suggested alternative: 'malloc'
         this->m_tReady = millis() + this->m_ProductInfo.MeasurementInterval * 1000;
                          ^~~~~~
                          malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::readUint16(McciCatenaScd30::cSCD30::Command, uint16_t&)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:206:9: error: 'delay' was not declared in this scope
         delay(this->kReadDelayMs);
         ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::setMeasurementInterval(uint16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:238:9: error: 'delay' was not declared in this scope
         delay(this->kCommandRecoveryMs);
         ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::activateAutomaticSelfCalbration(bool)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:265:9: error: 'delay' was not declared in this scope
         delay(this->kCommandRecoveryMs);
         ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::writeCommandBuffer(const uint8_t*, size_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:299:11: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     this->m_wire->beginTransmission(std::uint8_t(this->m_address));
           ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:300:15: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     if (this->m_wire->write(pBuffer, nBuffer) != nBuffer)
               ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:302:15: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     if (this->m_wire->endTransmission() != 0)
               ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::readResponse(uint8_t*, size_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:321:23: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     nReadFrom = this->m_wire->requestFrom(std::uint8_t(addr), /* bytes */ std::uint8_t(nBuf));
                       ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:327:21: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
     nResult = this->m_wire->available();
                     ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:332:24: error: 'class McciCatenaScd30::cSCD30' has no member named 'm_wire'
         buf[i] = this->m_wire->read();
                        ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::startContinuousMeasurementCommon(uint16_t)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:352:9: error: 'delay' was not declared in this scope
         delay(this->kCommandRecoveryMs);
         ^~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:355:26: error: 'millis' was not declared in this scope
         this->m_tReady = millis() + this->m_ProductInfo.MeasurementInterval * 1000;
                          ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:355:26: note: suggested alternative: 'malloc'
         this->m_tReady = millis() + this->m_ProductInfo.MeasurementInterval * 1000;
                          ^~~~~~
                          malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp: In member function 'bool McciCatenaScd30::cSCD30::queryReady(bool&)':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:381:24: error: 'millis' was not declared in this scope
     if ((std::int32_t)(millis() - this->m_tReady) < 0)
                        ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:381:24: note: suggested alternative: 'malloc'
     if ((std::int32_t)(millis() - this->m_tReady) < 0)
                        ^~~~~~
                        malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:396:30: error: 'millis' was not declared in this scope
             this->m_tReady = millis() + 1000;
                              ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:396:30: note: suggested alternative: 'malloc'
             this->m_tReady = millis() + 1000;
                              ^~~~~~
                              malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:414:34: error: 'millis' was not declared in this scope
                 this->m_tReady = millis() + 1000;
                                  ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:414:34: note: suggested alternative: 'malloc'
                 this->m_tReady = millis() + 1000;
                                  ^~~~~~
                                  malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:425:30: error: 'millis' was not declared in this scope
             this->m_tReady = millis() + 100;
                              ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.cpp:425:30: note: suggested alternative: 'malloc'
             this->m_tReady = millis() + 100;
                              ^~~~~~
                              malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_

examples/scd30_lorawan

Result: FAIL 

In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/lib/samd/catena4410/Catena4410_gk_lorawan_keys.cpp:37:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena4410_project_config.h:37:10: fatal error: ../../arduino-lmic/src/lmic/lmic_config_preconditions.h: No such file or directory
 #include "../../arduino-lmic/src/lmic/lmic_config_preconditions.h"
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/scd30_simple

Result: FAIL 

In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:16:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:82:20: error: expected ')' before '&' token
     cSCD30(TwoWire &wire, Address Address = Address::SCD30, Pin_t pinReady = -1)
                    ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:16:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:290:5: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
     TwoWire *m_wire;                /// pointer to bus to be used for this device
     ^~~~~~~
     TwoWire_h
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h: In member function 'uint32_t McciCatenaScd30::cSCD30::getMsToNextMeasurement() const':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:254:26: error: 'millis' was not declared in this scope
         auto const now = millis();
                          ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:254:26: note: suggested alternative: 'malloc'
         auto const now = millis();
                          ^~~~~~
                          malloc
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino: At global scope:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:49:20: error: no matching function for call to 'McciCatenaScd30::cSCD30::cSCD30(<brace-enclosed initializer list>)'
 cSCD30 gScd30 {Wire};
                    ^
In file included from /Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:16:0:
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:91:5: note: candidate: McciCatenaScd30::cSCD30::cSCD30(const McciCatenaScd30::cSCD30&&) <deleted>
     cSCD30(const cSCD30&&) = delete;
     ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:91:5: note:   no known conversion for argument 1 from 'arduino::TwoWire' to 'const McciCatenaScd30::cSCD30&&'
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:89:5: note: candidate: McciCatenaScd30::cSCD30::cSCD30(const McciCatenaScd30::cSCD30&) <deleted>
     cSCD30(const cSCD30&) = delete;
     ^~~~~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/src/MCCI_Catena_SCD30.h:89:5: note:   no known conversion for argument 1 from 'arduino::TwoWire' to 'const McciCatenaScd30::cSCD30&'
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino: In function 'void setup()':
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:86:17: error: 'D5' was not declared in this scope
         pinMode(D5, OUTPUT);
                 ^~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:86:17: note: suggested alternative: 'A5'
         pinMode(D5, OUTPUT);
                 ^~
                 A5
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:90:17: error: 'D11' was not declared in this scope
         pinMode(D11, OUTPUT);
                 ^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:90:17: note: suggested alternative: 'B11'
         pinMode(D11, OUTPUT);
                 ^~~
                 B11
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:94:17: error: 'D10' was not declared in this scope
         pinMode(D10, OUTPUT);
                 ^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:94:17: note: suggested alternative: 'B10'
         pinMode(D10, OUTPUT);
                 ^~~
                 B10
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:98:24: error: 'RCC' was not declared in this scope
         Serial.println(RCC->CSR >> 24, HEX);
                        ^~~
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:98:24: note: suggested alternative: 'RTC'
         Serial.println(RCC->CSR >> 24, HEX);
                        ^~~
                        RTC
/Users/alranel/Documents/git/arduino/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:99:21: error: 'RCC_CSR_RMVF' was not declared in this scope
         RCC->CSR |= RCC_CSR_RMVF;
                     ^~~~~~~~~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS 

Sketch uses 202322 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13872 bytes (4%) of dynamic memory, leaving 313808 bytes for local variables. Maximum is 327680 bytes.

examples/header-test

Result: PASS 

Sketch uses 202322 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13872 bytes (4%) of dynamic memory, leaving 313808 bytes for local variables. Maximum is 327680 bytes.

examples/scd30_lorawan

Result: FAIL 

WARNING: library MCCI_Catena_Arduino_Platform claims to run on samd, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library MCCI_FRAM_I2C claims to run on samd, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:17:3: error: #error "This sketch targets the MCCI Catena 4801"
 # error "This sketch targets the MCCI Catena 4801"
   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_lorawan/scd30_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena.h:76:3: error: #error Architecture not supported
 # error Architecture not supported
   ^

examples/scd30_simple

Result: FAIL 

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:90:17: error: 'D11' was not declared in this scope
         pinMode(D11, OUTPUT);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:94:17: error: 'D10' was not declared in this scope
         pinMode(D10, OUTPUT);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:98:24: error: 'RCC' was not declared in this scope
         Serial.println(RCC->CSR >> 24, HEX);
                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SCD30/examples/scd30_simple/scd30_simple.ino:99:21: error: 'RCC_CSR_RMVF' was not declared in this scope
         RCC->CSR |= RCC_CSR_RMVF;
                     ^