This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.1
More details
| Board | Claims compatibility | Inclusion | sdp_lorawan |
sdp_simple |
|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes ⚠️ | FAIL | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes ⚠️ | FAIL | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | FAIL |
Result: FAIL
In file included from /tmp/arduino-testlib301231648/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:20:10: fatal error: cstdint: No such file or directory
#include <cstdint>
^~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:17:3: error: #error "This sketch targets the MCCI Catena 4801"
# error "This sketch targets the MCCI Catena 4801"
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena.h:76:3: error: #error Architecture not supported
# error Architecture not supported
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena_Led.h:40:10: fatal error: type_traits: No such file or directory
#include <type_traits>
^~~~~~~~~~~~~
compilation terminated.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:20:10: fatal error: cstdint: No such file or directory
#include <cstdint>
^~~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library MCCI_Catena_Arduino_Platform claims to run on samd, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
WARNING: library MCCI_FRAM_I2C claims to run on samd, stm32 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:17:3: error: #error "This sketch targets the MCCI Catena 4801"
# error "This sketch targets the MCCI Catena 4801"
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena.h:76:3: error: #error Architecture not supported
# error Architecture not supported
^~~~~
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:117:17: error: 'D11' was not declared in this scope
pinMode(D11, OUTPUT);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:117:17: note: suggested alternative: 'B11'
pinMode(D11, OUTPUT);
^~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:121:17: error: 'D10' was not declared in this scope
pinMode(D10, OUTPUT);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:121:17: note: suggested alternative: 'B10'
pinMode(D10, OUTPUT);
^~~
B10
Result: FAIL
In file included from /tmp/arduino-testlib2742955528/test/test.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:20:10: fatal error: cstdint: No such file or directory
#include <cstdint>
^~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:17:3: error: #error "This sketch targets the MCCI Catena 4801"
# error "This sketch targets the MCCI Catena 4801"
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena.h:76:3: error: #error Architecture not supported
# error Architecture not supported
^~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena_Led.h:40:10: fatal error: type_traits: No such file or directory
#include <type_traits>
^~~~~~~~~~~~~
compilation terminated.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:20:10: fatal error: cstdint: No such file or directory
#include <cstdint>
^~~~~~~~~
compilation terminated.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:22:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:85:18: error: expected ')' before '&' token
cSDP(TwoWire &wire, Address Address = Address::SDP3x_A, Pin_t pinAlert = -1)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:292:5: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *m_wire; /// pointer to bus to be used for this device
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp: In member function 'bool McciCatenaSdp::cSDP::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:29:15: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
if (this->m_wire == nullptr)
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:35:11: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
this->m_wire->begin();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp: In member function 'bool McciCatenaSdp::cSDP::wakeup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:87:11: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
this->m_wire->beginTransmission(std::uint8_t(this->m_address));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:88:15: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
if (this->m_wire->endTransmission() != 0)
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:90:9: error: 'delay' was not declared in this scope
delay(2);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:91:15: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
this->m_wire->beginTransmission(std::uint8_t(this->m_address));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:93:19: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
if (this->m_wire->endTransmission() != 0)
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp: In member function 'bool McciCatenaSdp::cSDP::writeCommand(McciCatenaSdp::cSDP::Command)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:105:11: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
this->m_wire->beginTransmission(std::uint8_t(this->m_address));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:106:15: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
if (this->m_wire->write(cbuf, sizeof(cbuf)) != sizeof(cbuf))
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:108:15: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
if (this->m_wire->endTransmission() != 0)
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp: In member function 'bool McciCatenaSdp::cSDP::readResponse(uint8_t*, size_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:126:23: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
nReadFrom = this->m_wire->requestFrom(std::uint8_t(addr), /* bytes */ std::uint8_t(nBuf));
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:132:21: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
nResult = this->m_wire->available();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:137:24: error: 'class McciCatenaSdp::cSDP' has no member named 'm_wire'
buf[i] = this->m_wire->read();
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp: In member function 'bool McciCatenaSdp::cSDP::startTriggeredMeasurement()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:160:26: error: 'millis' was not declared in this scope
this->m_tReady = millis() + 46;
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:160:26: note: suggested alternative: 'malloc'
this->m_tReady = millis() + 46;
^~~~~~
malloc
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp: In member function 'bool McciCatenaSdp::cSDP::queryReady()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:174:22: error: 'millis' was not declared in this scope
if (std::int32_t(millis() - this->m_tReady) < 0)
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.cpp:174:22: note: suggested alternative: 'malloc'
if (std::int32_t(millis() - this->m_tReady) < 0)
^~~~~~
malloc
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/lib/samd/catena4410/Catena4410_gk_lorawan_keys.cpp:37:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena4410_project_config.h:37:10: fatal error: ../../arduino-lmic/src/lmic/lmic_config_preconditions.h: No such file or directory
#include "../../arduino-lmic/src/lmic/lmic_config_preconditions.h"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:85:18: error: expected ')' before '&' token
cSDP(TwoWire &wire, Address Address = Address::SDP3x_A, Pin_t pinAlert = -1)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:292:5: error: 'TwoWire' does not name a type; did you mean 'TwoWire_h'?
TwoWire *m_wire; /// pointer to bus to be used for this device
^~~~~~~
TwoWire_h
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:49:39: error: no matching function for call to 'McciCatenaSdp::cSDP::cSDP(<brace-enclosed initializer list>)'
cSDP gSdp {Wire, cSDP::Address::SDP8xx};
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:94:5: note: candidate: McciCatenaSdp::cSDP::cSDP(const McciCatenaSdp::cSDP&&) <deleted>
cSDP(const cSDP&&) = delete;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:94:5: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:92:5: note: candidate: McciCatenaSdp::cSDP::cSDP(const McciCatenaSdp::cSDP&) <deleted>
cSDP(const cSDP&) = delete;
^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/src/MCCI_Catena_SDP.h:92:5: note: candidate expects 1 argument, 2 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:117:17: error: 'D11' was not declared in this scope
pinMode(D11, OUTPUT);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:117:17: note: suggested alternative: 'B11'
pinMode(D11, OUTPUT);
^~~
B11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:121:17: error: 'D10' was not declared in this scope
pinMode(D10, OUTPUT);
^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:121:17: note: suggested alternative: 'B10'
pinMode(D10, OUTPUT);
^~~
B10
Result: PASS
Sketch uses 202322 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13872 bytes (4%) of dynamic memory, leaving 313808 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
WARNING: library MCCI_Catena_Arduino_Platform claims to run on samd, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
WARNING: library MCCI_FRAM_I2C claims to run on samd, stm32 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:17:3: error: #error "This sketch targets the MCCI Catena 4801"
# error "This sketch targets the MCCI Catena 4801"
^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.h:29:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_lorawan/sdp_lorawan.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_Arduino_Platform/src/Catena.h:76:3: error: #error Architecture not supported
# error Architecture not supported
^
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:117:17: error: 'D11' was not declared in this scope
pinMode(D11, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_Catena_SDP/examples/sdp_simple/sdp_simple.ino:121:17: error: 'D10' was not declared in this scope
pinMode(D10, OUTPUT);
^