MCCI LoRaWAN LMIC library - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MCCI LoRaWAN LMIC library

Version: 4.1.1
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	ttn-otaa	ttn-otaa-feather-us915	ttn-otaa-network-time	header_test	helium-otaa	raw	raw-feather	ttn-otaa-feather-us915-dht22	ttn-otaa-halconfig-us915	compliance-otaa-halconfig	raw-halconfig	ttn-abp	ttn-abp-feather-us915-dht22
arduino:avr:uno 1.8.4	Yes	PASS	FAIL	FAIL	FAIL	PASS	FAIL	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	PASS	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	FAIL	FAIL	PASS	FAIL	PASS	FAIL	FAIL	FAIL	PASS	PASS	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	PASS	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	FAIL	PASS	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 1350 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/src/hal/getpinmap_thisboard.cpp: In function 'const Arduino_LMIC::HalPinmap_t* Arduino_LMIC::GetPinmap_ThisBoard()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/src/hal/getpinmap_thisboard.cpp:71:72: note: #pragma message: Board not supported -- use an explicit pinmap
         #pragma message("Board not supported -- use an explicit pinmap")
                                                                        ^

examples/compliance-otaa-halconfig

Result: FAIL

Sketch uses 26996 bytes (83%) of program storage space. Maximum is 32256 bytes.
Global variables use 4184 bytes (204%) of dynamic memory, leaving -2136 bytes for local variables. Maximum is 2048 bytes.
��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������                           ^
Not enough memory; see https://support.arduino.cc/hc/en-us/articles/360013825179 for tips on reducing your footprint.

examples/header_test

Result: PASS

Sketch uses 1350 bytes (4%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.

examples/helium-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:114:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:114:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:190:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:190:14: note: suggested alternative: 'EV_RESET'
         case EV_TXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:193:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:193:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:196:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:196:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:199:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:199:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:249:68: error: cannot convert 'const Arduino_LMIC::HalPinmap_t*' to 'const lmic_pinmap*' in initialization
     const lmic_pinmap *pPinMap = Arduino_LMIC::GetPinmap_ThisBoard();
                                                                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:266:5: error: 'os_init_ex' was not declared in this scope
     os_init_ex(pPinMap);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:266:5: note: suggested alternative: 'os_init'
     os_init_ex(pPinMap

examples/raw

Result: PASS

Sketch uses 8964 bytes (27%) of program storage space. Maximum is 32256 bytes.
Global variables use 1339 bytes (65%) of dynamic memory, leaving 709 bytes for local variables. Maximum is 2048 bytes.

examples/raw-feather

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-feather/raw-feather.ino:106:3: error: #error "Unknown target"
 # error "Unknown target"
   ^~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/raw-halconfig

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/lmic.h:18:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic.h:5,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:33:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/oslmic.h:250:43: error: variable or field 'printf_P' declared void
     #define lmic_printf(fmt, ...) printf_P(PSTR(fmt), ## __VA_ARGS__)
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:106:6: note: in expansion of macro 'lmic_printf'
 void lmic_printf(const char *fmt, ...);
      ^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:28:0,
                 from /tmp/arduino-sketch-3555C1E5D5F43A8554E07272F8DF0AF5/sketch/raw-halconfig.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/oslmic.h:250:44: error: statement-expressions are not allowed outside functions nor in template-argument lists
     #define lmic_printf(fmt, ...) printf_P(PSTR(fmt), ## __VA_ARGS__)
                                            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:106:6: note: in expansion of macro 'lmic_printf'
 void lmic_printf(const char *fmt, ...);
      ^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/lmic.h:18:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic.h:5,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:33:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:106:35: error: expected primary-expression before '...' token
 void lmic_printf(const char *fmt, ...);
                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/oslmic.h:250:58: note: in definition of macro 'lmic_printf'
     #define lmic_printf(fmt, ...) printf_P(PSTR(fmt), ## __VA_ARGS__)
                                                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/oslmic.h:250:43: error: variable or field 'printf_P' declared void
     #define lmic_printf(fmt, ...) printf_P(PSTR(fmt), ## __VA_ARGS__)
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:109:6: note: in expansion of macro 'lmic_printf'
 void lmic_printf(const char *fmt, ...) {
      ^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/cores/arduino/Arduino.h:28:0,
                 from /tmp/arduino-sketch-3555C1E5D5F43A8554E07272F8DF0AF5/sketch/raw-halconfig.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/oslmic.h:250:44: error: statement-expressions are not allowed outside functions nor in template-argument lists
     #define lmic_printf(fmt, ...) printf_P(PSTR(fmt), ## __VA_ARGS__)
                                            ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:109:6: note: in expansion of macro 'lmic_printf'
 void lmic_printf(const char *fmt, ...) {
      ^~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/lmic.h:18:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic.h:5,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:33:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:109:35: error: expected primary-expression before '...' token
 void lmic_printf(const char *fmt, ...) {
                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework/src/lmic/oslmic.h:250:58: note: in definition of macro 'lmic_printf'
     #define lmic_printf(fmt, ...) printf_P(PSTR(fmt), ## __VA_ARGS__)
                                                          ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:223:66: error: cannot convert 'const Arduino_LMIC::HalPinmap_t*' to 'const lmic_pinmap*' in initialization
   const lmic_pinmap *pPinMap = Arduino_LMIC::GetPinmap_ThisBoard();
                                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:239:3: error: 'os_init_ex' was not declared in this scope
   os_init_ex(pPinMap);
   ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:239:3: note: suggested alternative: 'os_init'
   os_init_ex(pPinMap);
   ^~~~~~~~~~
   os_init
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:450:8: error: 'struct lmic_t' has no member named 'noRXIQinversion'
   LMIC.noRXIQinversion = true;
        ^~~~~~~~~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-abp

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:166:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:166:14: note: suggested alternative: 'EV_RESET'
         case EV_TXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:169:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:169:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:172:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:172:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:175:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:175:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-abp-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:57:29: error: unable to find numeric literal operator 'operator""ILLMEIN'
 static const u4_t DEVADDR = 0xFILLMEIN;
                             ^~~~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick

examples/ttn-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:117:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:117:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:192:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:192:14: note: suggested alternative: 'EV_RESET'
         case EV_TXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:195:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:195:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:198:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:198:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:201:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:201:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-otaa-feather-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915/ttn-otaa-feather-us915.ino:126:3: error: #error "Unknown target"
 # error "Unknown target"
   ^~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/ttn-otaa-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/ttn-otaa-halconfig-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:113:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:113:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:189:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:189:14: note: suggested alternative: 'EV_RESET'
         case EV_TXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:192:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:192:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:195:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:195:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:198:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:198:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/ardui

examples/ttn-otaa-network-time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 80758 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43624 bytes (16%) of dynamic memory, leaving 226712 bytes for local variables. Maximum is 270336 bytes.

examples/compliance-otaa-halconfig

Result: PASS

Sketch uses 100468 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 46996 bytes (17%) of dynamic memory, leaving 223340 bytes for local variables. Maximum is 270336 bytes.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/src/hal/getpinmap_thisboard.cpp: In function 'const Arduino_LMIC::HalPinmap_t* Arduino_LMIC::GetPinmap_ThisBoard()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/src/hal/getpinmap_thisboard.cpp:71:72: note: #pragma message: Board not supported -- use an explicit pinmap
         #pragma message("Board not supported -- use an explicit pinmap")
                                                                        ^

examples/header_test

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:15: error: 'ARDUINO_LMIC_VERSION' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:15: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:39: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:39: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:23:15: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_CALC(1,2,3,4) == 0x01020304);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:23:15: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_CALC(1,2,3,4) == 0x01020304);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:46: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:46: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:15: error: 'ARDUINO_LMIC_VERSION_GET_MAJOR' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:15: note: suggested alternative: 'LMIC_VERSION_MAJOR'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:46: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:46: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:15: error: 'ARDUINO_LMIC_VERSION_GET_MINOR' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:15: note: suggested alternative: 'LMIC_VERSION_MINOR'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:27:46: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 3);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:27:46: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 3);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:27:15: error: 'ARDUINO_LMIC_VERSION_GET_PATCH' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 3);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/

examples/helium-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/raw

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino:346:8: error: 'struct lmic_t' has no member named 'noRXIQinversion'
   LMIC.noRXIQinversion = true;
        ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino:361:8: error: 'struct lmic_t' has no member named 'noRXIQinversion'
   LMIC.noRXIQinversion = true;
        ^~~~~~~~~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/raw-feather

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-feather/raw-feather.ino:106:3: error: #error "Unknown target"
 # error "Unknown target"
   ^~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/raw-halconfig

Result: PASS

Sketch uses 85852 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44472 bytes (16%) of dynamic memory, leaving 225864 bytes for local variables. Maximum is 270336 bytes.

examples/ttn-abp

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:166:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:166:14: note: suggested alternative: 'ERESTART'
         case EV_TXSTART:
              ^~~~~~~~~~
              ERESTART
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:169:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:169:14: note: suggested alternative: 'ECANCELED'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              ECANCELED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:172:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:172:14: note: suggested alternative: 'ERESTART'
         case EV_RXSTART:
              ^~~~~~~~~~
              ERESTART
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:175:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:175:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-abp-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:57:29: error: unable to find numeric literal operator 'operator""ILLMEIN'
 static const u4_t DEVADDR = 0xFILLMEIN;
                             ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:89:1: error: 'const lmic_pinmap' has no non-static data member named 'rxtx_rx_active'
 };
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:166:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:166:14: note: suggested alternative: 'ERESTART'
         case EV_TXSTART:
              ^~~~~~~~~~
              ERESTART
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:169:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:169:14: note: suggested alternative: 'ECANCELED'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              ECANCELED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:172:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:172:14: note: suggested alternative: 'ERESTART'
         case EV_RXSTART:
              ^~~~~~~~~~
              ERESTART
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:175:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:175:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino: In function 'void do_send(osjob_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:206:32: error: 'LMIC_f2sflt16' was not declared in this scope
         uint16_t payloadTemp = LMIC_f2sflt16(temperature);
                                ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:206:32: note: suggested alternative: 'LMIC_reset'
         uint16_t payloadTemp = LMIC_f2sflt16(temperature);
                                ^~~~~~~~~~~~~
                                LMIC_reset
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:260:5: error: 'LMIC_enableChannel' was not declared in this scope
     LMIC_enableChannel(16);
     ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:260:5: note: suggested alternative: 'LMIC_disableChannel'
     LMIC_enableChannel(16);
     ^~~~~~~~~~~~~~~~~~
     LMIC_disableChannel
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
  Not used: /home/ec2-user/ard

examples/ttn-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:117:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:117:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:192:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:192:14: note: suggested alternative: 'ERESTART'
         case EV_TXSTART:
              ^~~~~~~~~~
              ERESTART
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:195:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:195:14: note: suggested alternative: 'ECANCELED'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              ECANCELED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:198:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:198:14: note: suggested alternative: 'ERESTART'
         case EV_RXSTART:
              ^~~~~~~~~~
              ERESTART
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:201:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:201:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-otaa-feather-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915/ttn-otaa-feather-us915.ino:126:3: error: #error "Unknown target"
 # error "Unknown target"
   ^~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-otaa-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick

examples/ttn-otaa-halconfig-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:113:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:113:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:189:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:189:14: note: suggested alternative: 'ERESTART'
         case EV_TXSTART:
              ^~~~~~~~~~
              ERESTART
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:192:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:192:14: note: suggested alternative: 'ECANCELED'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              ECANCELED
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:195:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:195:14: note: suggested alternative: 'ERESTART'
         case EV_RXSTART:
              ^~~~~~~~~~
              ERESTART
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:198:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:198:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testl

examples/ttn-otaa-network-time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 4960 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 195 bytes (3%) of dynamic memory, leaving 5949 bytes for local variables. Maximum is 6144 bytes.
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/src/hal/getpinmap_thisboard.cpp: In function 'const Arduino_LMIC::HalPinmap_t* Arduino_LMIC::GetPinmap_ThisBoard()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/src/hal/getpinmap_thisboard.cpp:71:72: note: #pragma message: Board not supported -- use an explicit pinmap
         #pragma message("Board not supported -- use an explicit pinmap")
                                                                        ^

examples/compliance-otaa-halconfig

Result: PASS

Sketch uses 29964 bytes (60%) of program storage space. Maximum is 49152 bytes.
Global variables use 3321 bytes (54%) of dynamic memory, leaving 2823 bytes for local variables. Maximum is 6144 bytes.

examples/header_test

Result: PASS

Sketch uses 4960 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 195 bytes (3%) of dynamic memory, leaving 5949 bytes for local variables. Maximum is 6144 bytes.

examples/helium-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:114:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:114:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:190:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:190:14: note: suggested alternative: 'IO_START'
         case EV_TXSTART:
              ^~~~~~~~~~
              IO_START
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:193:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:193:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:196:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:196:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:199:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:199:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:249:68: error: cannot convert 'const Arduino_LMIC::HalPinmap_t*' to 'const lmic_pinmap*' in initialization
     const lmic_pinmap *pPinMap = Arduino_LMIC::GetPinmap_ThisBoard();
                                                                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:266:5: error: 'os_init_ex' was not declared in this scope
     os_init_ex(pPinMap);
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:266:5: note: suggested alternative: 'os_init'
     os_init_ex(pPinMap

examples/raw

Result: PASS

Sketch uses 11947 bytes (24%) of program storage space. Maximum is 49152 bytes.
Global variables use 1071 bytes (17%) of dynamic memory, leaving 5073 bytes for local variables. Maximum is 6144 bytes.

examples/raw-feather

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-feather/raw-feather.ino:106:3: error: #error "Unknown target"
 # error "Unknown target"
   ^~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/raw-halconfig

Result: PASS

Sketch uses 10572 bytes (21%) of program storage space. Maximum is 49152 bytes.
Global variables use 1055 bytes (17%) of dynamic memory, leaving 5089 bytes for local variables. Maximum is 6144 bytes.

examples/ttn-abp

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/ttn-abp-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:57:29: error: unable to find numeric literal operator 'operator""ILLMEIN'
 static const u4_t DEVADDR = 0xFILLMEIN;
                             ^~~~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick

examples/ttn-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/ttn-otaa-feather-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915/ttn-otaa-feather-us915.ino:126:3: error: #error "Unknown target"
 # error "Unknown target"
   ^~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/ttn-otaa-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV

examples/ttn-otaa-halconfig-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:113:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:113:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:189:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:189:14: note: suggested alternative: 'IO_START'
         case EV_TXSTART:
              ^~~~~~~~~~
              IO_START
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:192:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:192:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:195:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:195:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:198:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:198:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/ardui

examples/ttn-otaa-network-time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13408 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3088 bytes (9%) of dynamic memory, leaving 29680 bytes for local variables. Maximum is 32768 bytes.

examples/compliance-otaa-halconfig

Result: PASS

Sketch uses 36916 bytes (14%) of program storage space. Maximum is 262144 bytes.
Global variables use 6464 bytes (19%) of dynamic memory, leaving 26304 bytes for local variables. Maximum is 32768 bytes.

examples/header_test

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:15: error: 'ARDUINO_LMIC_VERSION' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:15: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:39: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:39: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:23:15: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_CALC(1,2,3,4) == 0x01020304);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:23:15: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_CALC(1,2,3,4) == 0x01020304);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:46: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:46: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:15: error: 'ARDUINO_LMIC_VERSION_GET_MAJOR' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:15: note: suggested alternative: 'LMIC_VERSION_MAJOR'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:46: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:46: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:15: error: 'ARDUINO_LMIC_VERSION_GET_MINOR' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:15: note: suggested alternative: 'LMIC_VERSION_MINOR'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:27:46: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 3);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:27:46: note: suggested alternative: 'ARDUINO_API_VERSION'
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 3);
                                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:27:15: error: 'ARDUINO_LMIC_VERSION_GET_PATCH' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 3);
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/

examples/helium-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/raw

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino:346:8: error: 'struct lmic_t' has no member named 'noRXIQinversion'
   LMIC.noRXIQinversion = true;
        ^~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino:361:8: error: 'struct lmic_t' has no member named 'noRXIQinversion'
   LMIC.noRXIQinversion = true;
        ^~~~~~~~~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/raw-feather

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-feather/raw-feather.ino:106:3: error: #error "Unknown target"
 # error "Unknown target"
   ^~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/raw-halconfig

Result: PASS

Sketch uses 20392 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3940 bytes (12%) of dynamic memory, leaving 28828 bytes for local variables. Maximum is 32768 bytes.

examples/ttn-abp

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:166:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:166:14: note: suggested alternative: 'EV_RESET'
         case EV_TXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:169:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:169:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:172:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:172:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:175:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:175:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-abp-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:57:29: error: unable to find numeric literal operator 'operator""ILLMEIN'
 static const u4_t DEVADDR = 0xFILLMEIN;
                             ^~~~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick

examples/ttn-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:117:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:117:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:192:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:192:14: note: suggested alternative: 'EV_RESET'
         case EV_TXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:195:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:195:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:198:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:198:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:201:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:201:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-otaa-feather-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915/ttn-otaa-feather-us915.ino:126:3: error: #error "Unknown target"
 # error "Unknown target"
   ^~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-otaa-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: note: suggested alternative: 'dr_t'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV

examples/ttn-otaa-halconfig-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:113:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:113:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:189:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:189:14: note: suggested alternative: 'EV_RESET'
         case EV_TXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:192:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:192:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:195:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:195:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:198:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:198:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/ardui

examples/ttn-otaa-network-time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: note: suggested alternative: 'dr_t'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:123:15: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:123:15: note: suggested alternative: 'LMIC_setSession'
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
               ^~~~~~~~~~~~~~~~~~~
               LMIC_setSession
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:198:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:198:14: note: suggested alternative: 'EV_RESET'
         case EV_TXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:201:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:201:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_TXCANCELED:
              ^~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:204:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:204:14: note: suggested alternative: 'EV_RESET'
         case EV_RXSTART:
              ^~~~~~~~~~
              EV_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:207:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:207:14: note: suggested alternative: 'EV_TXCOMPLETE'
         case EV_JOIN_TXCOMPLETE:
              ^~~~~~~~~~~~~~~~~~
              EV_TXCOMPLETE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino: In function 'void user_request_network_time_callback(void*, int)':
/home/ec2-user/arduino-testlib/cli-da

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 201470 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13224 bytes (4%) of dynamic memory, leaving 314456 bytes for local variables. Maximum is 327680 bytes.

examples/compliance-otaa-halconfig

Result: PASS

Sketch uses 229978 bytes (17%) of program storage space. Maximum is 1310720 bytes.
Global variables use 16880 bytes (5%) of dynamic memory, leaving 310800 bytes for local variables. Maximum is 327680 bytes.

examples/header_test

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:15: error: 'ARDUINO_LMIC_VERSION' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:21:72: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION >= ARDUINO_LMIC_VERSION_CALC(2,1,5,0));
                                                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:23:48: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_CALC(1,2,3,4) == 0x01020304);
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:79: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:25:80: error: 'ARDUINO_LMIC_VERSION_GET_MAJOR' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MAJOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 1);
                                                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:79: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:26:80: error: 'ARDUINO_LMIC_VERSION_GET_MINOR' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_MINOR(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 2);
                                                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:27:79: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 3);
                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:27:80: error: 'ARDUINO_LMIC_VERSION_GET_PATCH' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_PATCH(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 3);
                                                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:28:79: error: 'ARDUINO_LMIC_VERSION_CALC' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_LOCAL(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 4);
                                                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:28:80: error: 'ARDUINO_LMIC_VERSION_GET_LOCAL' was not declared in this scope
 STATIC_ASSERT(ARDUINO_LMIC_VERSION_GET_LOCAL(ARDUINO_LMIC_VERSION_CALC(1,2,3,4)) == 4);
                                                                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/header_test/header_test.ino:19:48: note: in definition of macro 'STATIC_ASSERT'
  void  STATIC_ASSERT__(int MCCIADK_C_ASSERT_x[(e) ? 1: -1])
                                                ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/helium-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/helium-otaa/helium-otaa.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/raw

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino:346:8: error: 'struct lmic_t' has no member named 'noRXIQinversion'
   LMIC.noRXIQinversion = true;
        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw/raw.ino:361:8: error: 'struct lmic_t' has no member named 'noRXIQinversion'
   LMIC.noRXIQinversion = true;
        ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/raw-feather

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-feather/raw-feather.ino:106:3: error: #error "Unknown target"
 # error "Unknown target"
   ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/raw-halconfig

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:106:38: error: conflicting declaration of C function 'void printf(const char*, ...)'
 void lmic_printf(const char *fmt, ...);
                                      ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib/stdio.h:29:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/cores/esp32/Arduino.h:27,
                 from /tmp/arduino-sketch-3555C1E5D5F43A8554E07272F8DF0AF5/sketch/raw-halconfig.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib/stdio.h:178:12: note: previous declaration 'int printf(const char*, ...)'
 int _EXFUN(printf, (const char *__restrict, ...)
            ^
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib/_ansi.h:65:30: note: in definition of macro '_EXFUN'
 #define _EXFUN(name, proto)  name proto
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:223:66: error: cannot convert 'const Arduino_LMIC::HalPinmap_t*' to 'const lmic_pinmap*' in initialization
   const lmic_pinmap *pPinMap = Arduino_LMIC::GetPinmap_ThisBoard();
                                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:239:21: error: 'os_init_ex' was not declared in this scope
   os_init_ex(pPinMap);
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/raw-halconfig/raw-halconfig.ino:450:8: error: 'struct lmic_t' has no member named 'noRXIQinversion'
   LMIC.noRXIQinversion = true;
        ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-abp

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:57:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:61:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:52:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp/ttn-abp.ino:66:29: note: in expansion of macro 'FILLMEIN'
 static const u4_t DEVADDR = FILLMEIN ; // <-- Change this address for every node!
                             ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/ttn-abp-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:48:43: note: in expansion of macro 'FILLMEIN'
 static const PROGMEM u1_t NWKSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:44:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:51:43: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPSKEY[16] = { FILLMEIN };
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:57:29: error: unable to find numeric literal operator 'operator""ILLMEIN'
 static const u4_t DEVADDR = 0xFILLMEIN;
                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:89:1: error: 'const lmic_pinmap' has no non-static data member named 'rxtx_rx_active'
 };
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:166:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:169:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:172:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:175:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino: In function 'void do_send(osjob_t*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:206:57: error: 'LMIC_f2sflt16' was not declared in this scope
         uint16_t payloadTemp = LMIC_f2sflt16(temperature);
                                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-abp-feather-us915-dht22/ttn-abp-feather-us915-dht22.ino:260:26: error: 'LMIC_enableChannel' was not declared in this scope
     LMIC_enableChannel(16);
                          ^
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-otaa

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:56:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:60:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:49:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:66:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino: In function 'void onEvent(ev_t)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:117:67: error: 'LMIC_getSessionKeys' was not declared in this scope
               LMIC_getSessionKeys(&netid, &devaddr, nwkKey, artKey);
                                                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:192:14: error: 'EV_TXSTART' was not declared in this scope
         case EV_TXSTART:
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:195:14: error: 'EV_TXCANCELED' was not declared in this scope
         case EV_TXCANCELED:
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:198:14: error: 'EV_RXSTART' was not declared in this scope
         case EV_RXSTART:
              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa/ttn-otaa.ino:201:14: error: 'EV_JOIN_TXCOMPLETE' was not declared in this scope
         case EV_JOIN_TXCOMPLETE:
              ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-otaa-feather-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915/ttn-otaa-feather-us915.ino:126:3: error: #error "Unknown target"
 # error "Unknown target"
   ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library

examples/ttn-otaa-feather-us915-dht22

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:19: error: stray '#' in program
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:48:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8] = { FILLMEIN };
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:52:41: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8] = { FILLMEIN };
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:20: error: 'dont' was not declared in this scope
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:41:25: error: expected ')' before 'edit'
 #define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-feather-us915-dht22/ttn-otaa-feather-us915-dht22.ino:58:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework
Multiple libraries were found for "DHT.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/DHT_sensor_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Grove_Temperature_And_Humidity_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/uKit_Explore
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/NanoPlayBoard
Multiple libraries were found for "Adafruit_Sensor.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/Adafruit_Unified_Sensor
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ClimaStick
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ArdUAV

examples/ttn-otaa-halconfig-us915

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:60:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:64:40: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]= { FILLMEIN };
                                        ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:53:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-halconfig-us915/ttn-otaa-halconfig-us915.ino:70:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework

examples/ttn-otaa-network-time

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:20: error: stray '#' in program
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:62:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:66:39: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM DEVEUI[8]={ FILLMEIN };
                                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:21: error: 'dont' was not declared in this scope
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:54:26: error: expected ')' before 'edit'
 # define FILLMEIN (#dont edit this, edit the lines that use FILLMEIN)
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library/examples/ttn-otaa-network-time/ttn-otaa-network-time.ino:72:42: note: in expansion of macro 'FILLMEIN'
 static const u1_t PROGMEM APPKEY[16] = { FILLMEIN };
                                          ^
Multiple libraries were found for "lmic.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCCI_LoRaWAN_LMIC_library
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/IBM_LMIC_framework