This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.1.2
More details
| Board | Claims compatibility | Inclusion | basic |
|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes ⚠️ | FAIL | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No | FAIL | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No | FAIL | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
No | FAIL | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No | FAIL | FAIL |
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp: In function 'void USI_TWI_Master_Initialise()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:64:3: error: 'PORT_USI' was not declared in this scope
PORT_USI |=
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:64:3: note: suggested alternative: 'PORT0'
PORT_USI |=
^~~~~~~~
PORT0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:66:11: error: 'PIN_USI_SDA' was not declared in this scope
<< PIN_USI_SDA); // Enable pullup on SDA, to set high as released state.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:69:11: error: 'PIN_USI_SCL' was not declared in this scope
<< PIN_USI_SCL); // Enable pullup on SCL, to set high as released state.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:71:3: error: 'DDR_USI' was not declared in this scope
DDR_USI |= (1 << PIN_USI_SCL); // Enable SCL as output.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:74:3: error: 'USIDR' was not declared in this scope
USIDR = 0xFF; // Preload dataregister with "released level" data.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:74:3: note: suggested alternative: 'SPDR'
USIDR = 0xFF; // Preload dataregister with "released level" data.
^~~~~
SPDR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:3: error: 'USICR' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:3: note: suggested alternative: 'SPCR'
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~
SPCR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:17: error: 'USISIE' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:17: note: suggested alternative: 'SPIE'
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
SPIE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:33: error: 'USIOIE' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:33: note: suggested alternative: 'SPIE'
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
SPIE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:17: error: 'USIWM1' was not declared in this scope
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:17: note: suggested alternative: 'SM1'
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
SM1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:33: error: 'USIWM0' was not declared in this scope
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:33: note: suggested alternative: 'USBS0'
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
USBS0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:17: error: 'USICS1' was not declared in this scope
(1 << USICS1) | (0 << USICS0) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:17: note: suggested alternative: 'ISC11'
(1 << USICS1) | (0 << USICS0) |
^~~~~~
ISC11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:33: error: 'USICS0' was not declared in this scope
(1 << USICS1) | (0 << USICS0) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:33: note: suggested alternative: 'USBS0'
(1 << USICS1) | (0 << USICS0) |
^~~~~~
USBS0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:78:17: error: 'USICLK' was not declared in this scope
(1 << USICLK) | // Software stobe as counter clock source
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:78:17: note: suggested alternative: 'EXCLK'
(1 << USICLK) | // Software stobe as counter clock source
^~~~~~
EXCLK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:79:17: error: 'USITC' was not declared in this scope
(0 << USITC);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:3: error: 'USISR' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:3: note: suggested alternative: 'SPSR'
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
SPSR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:17: error: 'USISIF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:17: note: suggested alternative: 'SPIF'
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
SPIF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:33: error: 'USIOIF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:33: note: suggested alternative: 'SPIF'
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
SPIF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:49: error: 'USIPF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:81:17: error: 'USIDC' was not declared in this scope
(1 << USIDC) | // Clear flags,
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:82:19: error: 'USICNT0' was not declared in this scope
(0x0 << USICNT0); // and reset counter.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:82:19: note: suggested alternative: 'INT0'
(0x0 << USICNT0); // and reset counter.
^~~~~~~
INT0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp: In function 'unsigned char USI_TWI_Start_Transceiver_With_Data(unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:13: error: 'USISIF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:13: note: suggested alternative: 'SPIF'
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
SPIF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:29: error: 'USIOIF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:29: note: suggested alternative: 'SPIF'
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
SPIF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:45: error: 'USIPF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:162:13: error: 'USIDC' was not declared in this scope
(1 << USIDC) | // Prepare register value to: Clear flags, and
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:163:15: error: 'USICNT0' was not declared in this scope
(0x0 << USICNT0); // set USI to shift 8 bits i.e. count 16 clock edges.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:163:15: note: suggested alternative: 'INT0'
(0x0 << USICNT0); // set USI to shift 8 bits i.e. count 16 clock edges.
^~~~~~~
INT0
/h
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp: In function 'void USI_TWI_Master_Initialise()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:64:3: error: 'PORT_USI' was not declared in this scope
PORT_USI |=
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:64:3: note: suggested alternative: 'PORT0'
PORT_USI |=
^~~~~~~~
PORT0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:66:11: error: 'PIN_USI_SDA' was not declared in this scope
<< PIN_USI_SDA); // Enable pullup on SDA, to set high as released state.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:69:11: error: 'PIN_USI_SCL' was not declared in this scope
<< PIN_USI_SCL); // Enable pullup on SCL, to set high as released state.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:71:3: error: 'DDR_USI' was not declared in this scope
DDR_USI |= (1 << PIN_USI_SCL); // Enable SCL as output.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:74:3: error: 'USIDR' was not declared in this scope
USIDR = 0xFF; // Preload dataregister with "released level" data.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:74:3: note: suggested alternative: 'SPDR'
USIDR = 0xFF; // Preload dataregister with "released level" data.
^~~~~
SPDR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:3: error: 'USICR' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:3: note: suggested alternative: 'SPCR'
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~
SPCR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:17: error: 'USISIE' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:17: note: suggested alternative: 'SPIE'
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
SPIE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:33: error: 'USIOIE' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:33: note: suggested alternative: 'SPIE'
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
SPIE
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:17: error: 'USIWM1' was not declared in this scope
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:17: note: suggested alternative: 'SM1'
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
SM1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:33: error: 'USIWM0' was not declared in this scope
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:33: note: suggested alternative: 'USBS0'
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
USBS0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:17: error: 'USICS1' was not declared in this scope
(1 << USICS1) | (0 << USICS0) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:17: note: suggested alternative: 'ISC11'
(1 << USICS1) | (0 << USICS0) |
^~~~~~
ISC11
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:33: error: 'USICS0' was not declared in this scope
(1 << USICS1) | (0 << USICS0) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:33: note: suggested alternative: 'USBS0'
(1 << USICS1) | (0 << USICS0) |
^~~~~~
USBS0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:78:17: error: 'USICLK' was not declared in this scope
(1 << USICLK) | // Software stobe as counter clock source
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:78:17: note: suggested alternative: 'EXCLK'
(1 << USICLK) | // Software stobe as counter clock source
^~~~~~
EXCLK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:79:17: error: 'USITC' was not declared in this scope
(0 << USITC);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:3: error: 'USISR' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:3: note: suggested alternative: 'SPSR'
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
SPSR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:17: error: 'USISIF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:17: note: suggested alternative: 'SPIF'
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
SPIF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:33: error: 'USIOIF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:33: note: suggested alternative: 'SPIF'
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
SPIF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:49: error: 'USIPF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:81:17: error: 'USIDC' was not declared in this scope
(1 << USIDC) | // Clear flags,
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:82:19: error: 'USICNT0' was not declared in this scope
(0x0 << USICNT0); // and reset counter.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:82:19: note: suggested alternative: 'INT0'
(0x0 << USICNT0); // and reset counter.
^~~~~~~
INT0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp: In function 'unsigned char USI_TWI_Start_Transceiver_With_Data(unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:13: error: 'USISIF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:13: note: suggested alternative: 'SPIF'
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
SPIF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:29: error: 'USIOIF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:29: note: suggested alternative: 'SPIF'
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
SPIF
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:45: error: 'USIPF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:162:13: error: 'USIDC' was not declared in this scope
(1 << USIDC) | // Prepare register value to: Clear flags, and
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:163:15: error: 'USICNT0' was not declared in this scope
(0x0 << USICNT0); // set USI to shift 8 bits i.e. count 16 clock edges.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:163:15: note: suggested alternative: 'INT0'
(0x0 << USICNT0); // set USI to shift 8 bits i.e. count 16 clock edges.
^~~~~~~
INT0
/h
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:29:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:29:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Result: FAIL
WARNING: library MCP23017_Attiny85 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp: In function 'void USI_TWI_Master_Initialise()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:64:3: error: 'PORT_USI' was not declared in this scope
PORT_USI |=
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:64:3: note: suggested alternative: 'PORT_t'
PORT_USI |=
^~~~~~~~
PORT_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:66:11: error: 'PIN_USI_SDA' was not declared in this scope
<< PIN_USI_SDA); // Enable pullup on SDA, to set high as released state.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:69:11: error: 'PIN_USI_SCL' was not declared in this scope
<< PIN_USI_SCL); // Enable pullup on SCL, to set high as released state.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:71:3: error: 'DDR_USI' was not declared in this scope
DDR_USI |= (1 << PIN_USI_SCL); // Enable SCL as output.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:74:3: error: 'USIDR' was not declared in this scope
USIDR = 0xFF; // Preload dataregister with "released level" data.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:3: error: 'USICR' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:17: error: 'USISIE' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:33: error: 'USIOIE' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:17: error: 'USIWM1' was not declared in this scope
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:17: note: suggested alternative: 'USART1'
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
USART1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:33: error: 'USIWM0' was not declared in this scope
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:33: note: suggested alternative: 'USART0'
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
USART0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:17: error: 'USICS1' was not declared in this scope
(1 << USICS1) | (0 << USICS0) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:17: note: suggested alternative: 'USART1'
(1 << USICS1) | (0 << USICS0) |
^~~~~~
USART1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:33: error: 'USICS0' was not declared in this scope
(1 << USICS1) | (0 << USICS0) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:33: note: suggested alternative: 'USART0'
(1 << USICS1) | (0 << USICS0) |
^~~~~~
USART0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:78:17: error: 'USICLK' was not declared in this scope
(1 << USICLK) | // Software stobe as counter clock source
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:79:17: error: 'USITC' was not declared in this scope
(0 << USITC);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:3: error: 'USISR' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:3: note: suggested alternative: 'ISR'
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
ISR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:17: error: 'USISIF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:33: error: 'USIOIF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:49: error: 'USIPF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:81:17: error: 'USIDC' was not declared in this scope
(1 << USIDC) | // Clear flags,
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:82:19: error: 'USICNT0' was not declared in this scope
(0x0 << USICNT0); // and reset counter.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:82:19: note: suggested alternative: 'USART0'
(0x0 << USICNT0); // and reset counter.
^~~~~~~
USART0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp: In function 'unsigned char USI_TWI_Start_Transceiver_With_Data(unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:13: error: 'USISIF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:29: error: 'USIOIF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:45: error: 'USIPF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:162:13: error: 'USIDC' was not declared in this scope
(1 << USIDC) | // Prepare register value to: Clear flags, and
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:163:15: error: 'USICNT0' was not declared in this scope
(0x0 << USICNT0); // set USI to shift 8 bits i.e. count 16 clock edges.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:163:15: note: suggested alternative: 'USART0'
(0x0 << USICNT0); // set USI to shift 8 bits i.e. count 16 clock edges.
^~~~~~~
USART0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:229:7: error: 'PORT_USI' was not declared in this scope
PORT_USI &= ~(1 << PIN_USI_SCL); // Pull SCL LOW.
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:229:7: note: suggested alternative: 'PORT_t'
PORT_USI &= ~(1 << PIN_USI_SCL); // Pull SCL LOW.
^~~~~~~~
PORT_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:229:26: error: 'PIN_USI_SCL' was not declared in this scope
PORT_USI &= ~(1 << PIN_USI_SCL); // Pull SCL LOW.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:230:7: error: 'USIDR' was not declared in this scope
USIDR = *(msg++); // Setup data.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:234:7: error: 'DDR_USI' was not declared in this scope
DDR_USI &= ~(1 << PIN_USI_SDA); // Enable SDA as input.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:234:25: error: 'PIN_USI_SDA' was not declared in this scope
DDR_USI &= ~(1 << PIN_USI_SDA); // Enable SDA as input.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:266:7: error: 'DDR_USI' was not declared in this scope
DDR_USI &= ~(1 << PIN_USI_SDA); // Enable SDA as input.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:266:25: error: 'PIN_USI_SDA' was not declared in this scope
DDR_USI &= ~(1 << PIN_USI_SDA); // Enable SDA as input.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:272:9: error: 'USIDR' was not declared in this scope
Result: FAIL
WARNING: library MCP23017_Attiny85 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp: In function 'void USI_TWI_Master_Initialise()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:64:3: error: 'PORT_USI' was not declared in this scope
PORT_USI |=
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:64:3: note: suggested alternative: 'PORT_t'
PORT_USI |=
^~~~~~~~
PORT_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:66:11: error: 'PIN_USI_SDA' was not declared in this scope
<< PIN_USI_SDA); // Enable pullup on SDA, to set high as released state.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:69:11: error: 'PIN_USI_SCL' was not declared in this scope
<< PIN_USI_SCL); // Enable pullup on SCL, to set high as released state.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:71:3: error: 'DDR_USI' was not declared in this scope
DDR_USI |= (1 << PIN_USI_SCL); // Enable SCL as output.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:74:3: error: 'USIDR' was not declared in this scope
USIDR = 0xFF; // Preload dataregister with "released level" data.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:3: error: 'USICR' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:17: error: 'USISIE' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:75:33: error: 'USIOIE' was not declared in this scope
USICR = (0 << USISIE) | (0 << USIOIE) | // Disable Interrupts.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:17: error: 'USIWM1' was not declared in this scope
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:17: note: suggested alternative: 'USART1'
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
USART1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:33: error: 'USIWM0' was not declared in this scope
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:76:33: note: suggested alternative: 'USART0'
(1 << USIWM1) | (0 << USIWM0) | // Set USI in Two-wire mode.
^~~~~~
USART0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:17: error: 'USICS1' was not declared in this scope
(1 << USICS1) | (0 << USICS0) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:17: note: suggested alternative: 'USART1'
(1 << USICS1) | (0 << USICS0) |
^~~~~~
USART1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:33: error: 'USICS0' was not declared in this scope
(1 << USICS1) | (0 << USICS0) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:77:33: note: suggested alternative: 'USART0'
(1 << USICS1) | (0 << USICS0) |
^~~~~~
USART0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:78:17: error: 'USICLK' was not declared in this scope
(1 << USICLK) | // Software stobe as counter clock source
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:79:17: error: 'USITC' was not declared in this scope
(0 << USITC);
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:3: error: 'USISR' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:3: note: suggested alternative: 'ISR'
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
ISR
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:17: error: 'USISIF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:33: error: 'USIOIF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:80:49: error: 'USIPF' was not declared in this scope
USISR = (1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:81:17: error: 'USIDC' was not declared in this scope
(1 << USIDC) | // Clear flags,
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:82:19: error: 'USICNT0' was not declared in this scope
(0x0 << USICNT0); // and reset counter.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:82:19: note: suggested alternative: 'USART0'
(0x0 << USICNT0); // and reset counter.
^~~~~~~
USART0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp: In function 'unsigned char USI_TWI_Start_Transceiver_With_Data(unsigned char*, unsigned char)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:13: error: 'USISIF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:29: error: 'USIOIF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:161:45: error: 'USIPF' was not declared in this scope
(1 << USISIF) | (1 << USIOIF) | (1 << USIPF) |
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:162:13: error: 'USIDC' was not declared in this scope
(1 << USIDC) | // Prepare register value to: Clear flags, and
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:163:15: error: 'USICNT0' was not declared in this scope
(0x0 << USICNT0); // set USI to shift 8 bits i.e. count 16 clock edges.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:163:15: note: suggested alternative: 'USART0'
(0x0 << USICNT0); // set USI to shift 8 bits i.e. count 16 clock edges.
^~~~~~~
USART0
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:229:7: error: 'PORT_USI' was not declared in this scope
PORT_USI &= ~(1 << PIN_USI_SCL); // Pull SCL LOW.
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:229:7: note: suggested alternative: 'PORT_t'
PORT_USI &= ~(1 << PIN_USI_SCL); // Pull SCL LOW.
^~~~~~~~
PORT_t
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:229:26: error: 'PIN_USI_SCL' was not declared in this scope
PORT_USI &= ~(1 << PIN_USI_SCL); // Pull SCL LOW.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:230:7: error: 'USIDR' was not declared in this scope
USIDR = *(msg++); // Setup data.
^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:234:7: error: 'DDR_USI' was not declared in this scope
DDR_USI &= ~(1 << PIN_USI_SDA); // Enable SDA as input.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:234:25: error: 'PIN_USI_SDA' was not declared in this scope
DDR_USI &= ~(1 << PIN_USI_SDA); // Enable SDA as input.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:266:7: error: 'DDR_USI' was not declared in this scope
DDR_USI &= ~(1 << PIN_USI_SDA); // Enable SDA as input.
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:266:25: error: 'PIN_USI_SDA' was not declared in this scope
DDR_USI &= ~(1 << PIN_USI_SDA); // Enable SDA as input.
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:272:9: error: 'USIDR' was not declared in this scope
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:29:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:29:10: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^~~~~~~~~~
compilation terminated.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/TinyWireM/USI_TWI_Master.cpp:28:27: fatal error: avr/interrupt.h: No such file or directory compilation terminated.
Result: FAIL
xtensa-esp32-elf-g++: error: /tmp/arduino-sketch-00F5565411B34CD08462F7570D456BA1/sketch/basic.ino.cpp: No such file or directory xtensa-esp32-elf-g++: warning: '-x c++' after last input file has no effect xtensa-esp32-elf-g++: fatal error: no input files compilation terminated.