This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.2.0
More details
| Board | Claims compatibility | Inclusion | MCP9808_EX1 |
|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | PASS |
|
arduino:samd:mkrwifi1010
1.8.12 |
No ⚠️ | PASS | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | PASS |
Result: PASS
Sketch uses 1636 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 122 bytes (5%) of dynamic memory, leaving 1926 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 8246 bytes (25%) of program storage space. Maximum is 32256 bytes. Global variables use 465 bytes (22%) of dynamic memory, leaving 1583 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino: In function 'void displayData()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:49:38: error: 'F' cannot be used as a function
Serial << F("\nUpper Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertUpper << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:49:55: error: 'F' cannot be used as a function
Serial << F("\nUpper Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertUpper << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:49:78: error: 'F' cannot be used as a function
Serial << F("\nUpper Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertUpper << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:52:36: error: 'F' cannot be used as a function
Serial << F("Lower Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertLower << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:52:53: error: 'F' cannot be used as a function
Serial << F("Lower Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertLower << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:52:76: error: 'F' cannot be used as a function
Serial << F("Lower Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertLower << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:55:39: error: 'F' cannot be used as a function
Serial << F("Critical Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertCritical << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:55:56: error: 'F' cannot be used as a function
Serial << F("Critical Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertCritical << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:55:79: error: 'F' cannot be used as a function
Serial << F("Critical Limit\t") << C << F("C\t") << F << F("F\tAlert=") << mySensor.alertCritical << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:58:34: error: 'F' cannot be used as a function
Serial << F("Ambient\t\t") << C << F("C\t") << F << F("F\n");
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:58:51: error: 'F' cannot be used as a function
Serial << F("Ambient\t\t") << C << F("C\t") << F << F("F\n");
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:58:68: error: 'F' cannot be used as a function
Serial << F("Ambient\t\t") << C << F("C\t") << F << F("F\n");
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:59:32: error: 'F' cannot be used as a function
Serial << F("Config 0x") << _HEX(mySensor.config) << F(" Resolution 0x") << _HEX(mySensor.resolution) << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:59:80: error: 'F' cannot be used as a function
Serial << F("Config 0x") << _HEX(mySensor.config) << F(" Resolution 0x") << _HEX(mySensor.resolution) << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:60:32: error: 'F' cannot be used as a function
Serial << F("Mfr ID 0x") << _HEX(mySensor.mfrID) << F( " Device ID 0x") << _HEX(mySensor.deviceID) << F( " Device Rev 0x") << _HEX(mySensor.deviceRev) << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:60:79: error: 'F' cannot be used as a function
Serial << F("Mfr ID 0x") << _HEX(mySensor.mfrID) << F( " Device ID 0x") << _HEX(mySensor.deviceID) << F( " Device Rev 0x") << _HEX(mySensor.deviceRev) << endl;
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/examples/MCP9808_EX1/MCP9808_EX1.ino:60:130: error: 'F' cannot be used as a function
Serial << F("Mfr ID 0x") << _HEX(mySensor.mfrID) << F( " Device ID 0x") << _HEX(mySensor.deviceID) << F( " Device Rev 0x") << _HEX(mySensor.deviceRev) << endl;
^
Result: PASS
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3104 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 317 bytes (5%) of dynamic memory, leaving 5827 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/src/MCP9808.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/src/MCP9808.cpp:5:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t MCP9808::read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 9023 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 503 bytes (8%) of dynamic memory, leaving 5641 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/src/MCP9808.h:30:0,
from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MCP9808/src/MCP9808.cpp:5:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In member function 'uint8_t MCP9808::read()':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
size_t requestFrom(int, int);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
size_t requestFrom(uint8_t, size_t);
^~~~~~~~~~~
Result: PASS
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 13588 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s). Sketch uses 23748 bytes (9%) of program storage space. Maximum is 262144 bytes. Global variables use 3588 bytes (10%) of dynamic memory, leaving 29180 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 202466 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13880 bytes (4%) of dynamic memory, leaving 313800 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library MCP9808 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 215374 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14152 bytes (4%) of dynamic memory, leaving 313528 bytes for local variables. Maximum is 327680 bytes.