This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.0.0
More details
| Board | Claims compatibility | Inclusion | MD_OnePin_Sec_ATTiny_LED |
MD_OnePin_Sec_C_LED |
MD_OnePin_Simple_Pri |
Test |
|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS | FAIL | PASS | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes | PASS | FAIL | PASS | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes | PASS | FAIL | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | PASS | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes | PASS | FAIL | PASS | PASS | FAIL |
Result: PASS
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:65: error: 'GIMSK' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:65: note: suggested alternative: 'EIMSK'
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
Result: PASS
Sketch uses 1804 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 38 bytes (1%) of dynamic memory, leaving 2010 bytes for local variables. Maximum is 2048 bytes.
Result: PASS
Sketch uses 2444 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 205 bytes (10%) of dynamic memory, leaving 1843 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: PASS
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:85:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(INT0_vect)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:85:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(INT0_vect)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:23: error: 'DDRB' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:120:3: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(LED_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:23: note: suggested alternative: 'DIR'
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:120:3: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(LED_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:31: error: '_BV' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:120:3: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(LED_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:31: note: suggested alternative: '_B'
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:120:3: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(LED_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:49:42: error: 'PORTB' was not declared in this scope
#define SET_INPUT(p) { DDRB &= ~_BV(p); PORTB |= _BV(p); } // input and pullup
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:126:3: note: in expansion of macro 'SET_INPUT'
SET_INPUT(OP_PIN);
^~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:22: error: 'MCUCR' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:35: error: 'ISC00' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:35: note: suggested alternative: 'I2C_0'
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:57: error: 'ISC01' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:57: note: suggested alternative: 'I2C_1'
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:65: error: 'GIMSK' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:78: error: 'INT0' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:78: note: suggested alternative: 'EINTR'
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:19: error: 'PINB' was not declared in this scope
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:19: note: suggested alternative: 'SING'
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:27: error: '_BV' was not declared in this scope
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:27: note: suggested alternative: '_B'
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:23: error: 'DDRB' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:164:7: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(OP_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:23: note: suggested alternative: 'DIR'
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:164:7: note: in expan
Result: PASS
Sketch uses 80644 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43716 bytes (16%) of dynamic memory, leaving 226620 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
Sketch uses 79654 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43456 bytes (16%) of dynamic memory, leaving 226880 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
Result: PASS
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes. Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino: In function 'void INT0_vect()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:56:24: error: 'PINB' was not declared in this scope
#define IS_LOW(p) ((PINB &= _BV(p)) == 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:98:11: note: in expansion of macro 'IS_LOW'
if (IS_LOW(OP_PIN))
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:56:24: note: suggested alternative: 'PIN0'
#define IS_LOW(p) ((PINB &= _BV(p)) == 0)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:98:11: note: in expansion of macro 'IS_LOW'
if (IS_LOW(OP_PIN))
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:22: error: 'MCUCR' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-7C15C997C69FCB6DA43C67AA0797E907/sketch/MD_OnePin_Sec_ATTiny_LED.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:35: error: 'ISC00' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:57: error: 'ISC01' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:65: error: 'GIMSK' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/String.h:31,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/IPAddress.h:24,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/api/ArduinoAPI.h:30,
from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/cores/arduino/Arduino.h:23,
from /tmp/arduino-sketch-7C15C997C69FCB6DA43C67AA0797E907/sketch/MD_OnePin_Sec_ATTiny_LED.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:78: error: 'INT0' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:78: note: suggested alternative: 'PIN0'
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:19: error: 'PINB' was not declared in this scope
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:19: note: suggested alternative: 'PIN0'
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
Result: PASS
Sketch uses 2690 bytes (5%) of program storage space. Maximum is 49152 bytes. Global variables use 239 bytes (3%) of dynamic memory, leaving 5905 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
Sketch uses 3456 bytes (7%) of program storage space. Maximum is 49152 bytes. Global variables use 186 bytes (3%) of dynamic memory, leaving 5958 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
Result: PASS
Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:85:5: error: expected constructor, destructor, or type conversion before '(' token
ISR(INT0_vect)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:85:4: error: expected constructor, destructor, or type conversion before '(' token
ISR(INT0_vect)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:23: error: 'DDRB' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:120:3: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(LED_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:31: error: '_BV' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:120:3: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(LED_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:31: note: suggested alternative: '_B'
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:120:3: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(LED_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:22: error: 'MCUCR' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:35: error: 'ISC00' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:57: error: 'ISC01' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:57: note: suggested alternative: 'SCK1'
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:65: error: 'GIMSK' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:60:78: error: 'INT0' was not declared in this scope
#define ENA_INT0 { MCUCR |= _BV(ISC00); MCUCR &= ~_BV(ISC01); GIMSK |= _BV(INT0); }
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:127:3: note: in expansion of macro 'ENA_INT0'
ENA_INT0;
^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:19: error: 'PINB' was not declared in this scope
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:19: note: suggested alternative: 'SING'
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:27: error: '_BV' was not declared in this scope
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:52:27: note: suggested alternative: '_B'
#define TOGGLE(p) PINB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:140:5: note: in expansion of macro 'TOGGLE'
TOGGLE(LED_PIN);
^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:23: error: 'DDRB' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:164:7: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(OP_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:31: error: '_BV' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:164:7: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(OP_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:31: note: suggested alternative: '_B'
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:164:7: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(OP_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:23: error: 'DDRB' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:173:7: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(OP_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:31: error: '_BV' was not declared in this scope
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:173:7: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(OP_PIN);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:50:31: note: suggested alternative: '_B'
#define SET_OUTPUT(p) DDRB |= _BV(p)
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:173:7: note: in expansion of macro 'SET_OUTPUT'
SET_OUTPUT(OP_PIN);
^~~~~~~~~~
Result: PASS
Sketch uses 12976 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3168 bytes (9%) of dynamic memory, leaving 29600 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 12768 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3008 bytes (9%) of dynamic memory, leaving 29760 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
Result: PASS
Sketch uses 198050 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13096 bytes (3%) of dynamic memory, leaving 314584 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MD_OnePin/examples/MD_OnePin_Sec_ATTiny_LED/MD_OnePin_Sec_ATTiny_LED.ino:14:27: fatal error: avr/interrupt.h: No such file or directory compilation terminated.
Result: PASS
Sketch uses 199818 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13776 bytes (4%) of dynamic memory, leaving 313904 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
Sketch uses 201894 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13360 bytes (4%) of dynamic memory, leaving 314320 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL