MFRC522_I2C - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MFRC522_I2C

Compatibility matrix

Board	Claims compatibility	Inclusion	dual_i2c_scanner	dual_i2c_scanner_new	mfrc522_i2c
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	FAIL	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	Yes ⚠️	FAIL	FAIL	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp: In member function 'void MFRC522_I2C::PCD_WriteRegister(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:42:50: error: call of overloaded 'beginTransmission(uint16_t&)' is ambiguous
  _TwoWireInstance->beginTransmission(_chipAddress);
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.h:82:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:61:10: note: candidate: void TwoWire::beginTransmission(uint8_t)
     void beginTransmission(uint8_t);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:62:10: note: candidate: void TwoWire::beginTransmission(int)
     void beginTransmission(int);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp: In member function 'void MFRC522_I2C::PCD_WriteRegister(byte, byte, byte*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:60:50: error: call of overloaded 'beginTransmission(uint16_t&)' is ambiguous
  _TwoWireInstance->beginTransmission(_chipAddress);
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.h:82:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:61:10: note: candidate: void TwoWire::beginTransmission(uint8_t)
     void beginTransmission(uint8_t);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:62:10: note: candidate: void TwoWire::beginTransmission(int)
     void beginTransmission(int);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp: In member function 'byte MFRC522_I2C::PCD_ReadRegister(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:79:50: error: call of overloaded 'beginTransmission(uint16_t&)' is ambiguous
  _TwoWireInstance->beginTransmission(_chipAddress);
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.h:82:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:61:10: note: candidate: void TwoWire::beginTransmission(uint8_t)
     void beginTransmission(uint8_t);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:62:10: note: candidate: void TwoWire::beginTransmission(int)
     void beginTransmission(int);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp: In member function 'void MFRC522_I2C::PCD_ReadRegister(byte, byte, byte*, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:103:50: error: call of overloaded 'beginTransmission(uint16_t&)' is ambiguous
  _TwoWireInstance->beginTransmission(_chipAddress);
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.h:82:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:61:10: note: candidate: void TwoWire::beginTransmission(uint8_t)
     void beginTransmission(uint8_t);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:62:10: note: candidate: void TwoWire::beginTransmission(int)
     void beginTransmission(int);
          ^~~~~~~~~~~~~~~~~

examples/dual_i2c_scanner

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:13:30: error: no matching function for call to 'TwoWire::TwoWire(int)'
 TwoWire i2cBusOne = TwoWire(0);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note: candidate: TwoWire::TwoWire()
     TwoWire();
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note:   candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
 class TwoWire : public Stream
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note:   no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note:   no known conversion for argument 1 from 'int' to 'TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:14:30: error: no matching function for call to 'TwoWire::TwoWire(int)'
 TwoWire i2cBusTwo = TwoWire(1);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note: candidate: TwoWire::TwoWire()
     TwoWire();
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note:   candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
 class TwoWire : public Stream
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note:   no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note:   no known conversion for argument 1 from 'int' to 'TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:15:1: error: 'MFRC522' does not name a type; did you mean 'MFRC522_I2C'?
 MFRC522 mfrc522(RST_PIN , 0x28, i2cBusTwo);
 ^~~~~~~
 MFRC522_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:19:43: error: no matching function for call to 'TwoWire::begin(int, int, long int)'
   i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
                                           ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate: void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:20:51: error: no matching function for call to 'TwoWire::begin(int, int, long int)'
   i2cBusTwo.begin(ext_IIC_DATA, ext_IIC_CLK, 40000);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate: void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:27:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();             // Init MFRC522
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:98:12: error: 'mfrc522' was not declared in this scope
   byte v = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
            ^~~~~~~

examples/dual_i2c_scanner_new

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:15:30: error: no matching function for call to 'TwoWire::TwoWire(int)'
 TwoWire i2cBusOne = TwoWire(0);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note: candidate: TwoWire::TwoWire()
     TwoWire();
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note:   candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
 class TwoWire : public Stream
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note:   no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note:   no known conversion for argument 1 from 'int' to 'TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:16:30: error: no matching function for call to 'TwoWire::TwoWire(int)'
 TwoWire i2cBusTwo = TwoWire(1);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note: candidate: TwoWire::TwoWire()
     TwoWire();
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:52:5: note:   candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
 class TwoWire : public Stream
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note:   no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:34:7: note:   no known conversion for argument 1 from 'int' to 'TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:17:1: error: 'MFRC522' does not name a type; did you mean 'MFRC522_I2C'?
 MFRC522 mfrc522(chipAddress, RST_PIN, i2cBusTwo);
 ^~~~~~~
 MFRC522_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:24:43: error: no matching function for call to 'TwoWire::begin(int, int, long int)'
   i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
                                           ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate: void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:26:51: error: no matching function for call to 'TwoWire::begin(int, int, long int)'
   i2cBusTwo.begin(ext_IIC_DATA, ext_IIC_CLK, 40000);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note: candidate: void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/avr/1.8.4/libraries/Wire/src/Wire.h:55:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:28:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:36:6: error: 'mfrc522' was not declared in this scope
  if (mfrc522.PCD_PerformSelfTest()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:113:17: error: 'mfrc522' was not declared in this scope
  byte version = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
                 ^~~~~~~

examples/mfrc522_i2c

Result: FAIL

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 81706 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44220 bytes (16%) of dynamic memory, leaving 226116 bytes for local variables. Maximum is 270336 bytes.

examples/dual_i2c_scanner

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:13:30: error: no matching function for call to 'arduino::MbedI2C::MbedI2C(int)'
 TwoWire i2cBusOne = TwoWire(0);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note: candidate: arduino::MbedI2C::MbedI2C(PinName, PinName)
     MbedI2C(PinName sda, PinName scl);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note:   candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note: candidate: arduino::MbedI2C::MbedI2C(int, int)
     MbedI2C(int sda, int scl);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note:   candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:14:30: error: no matching function for call to 'arduino::MbedI2C::MbedI2C(int)'
 TwoWire i2cBusTwo = TwoWire(1);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note: candidate: arduino::MbedI2C::MbedI2C(PinName, PinName)
     MbedI2C(PinName sda, PinName scl);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note:   candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note: candidate: arduino::MbedI2C::MbedI2C(int, int)
     MbedI2C(int sda, int scl);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note:   candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:15:1: error: 'MFRC522' does not name a type; did you mean 'MFRC522_I2C'?
 MFRC522 mfrc522(RST_PIN , 0x28, i2cBusTwo);
 ^~~~~~~
 MFRC522_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:19:43: error: no matching function for call to 'arduino::MbedI2C::begin(int, int, int)'
   i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
                                           ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate: virtual void arduino::MbedI2C::begin()
     virtual void begin();
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate: virtual void arduino::MbedI2C::begin(uint8_t)
     virtual void begin(uint8_t address);
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:20:51: error: no matching function for call to 'arduino::MbedI2C::begin(int, int, int)'
   i2cBusTwo.begin(ext_IIC_DATA, ext_IIC_CLK, 40000);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate: virtual void arduino::MbedI2C::begin()
     virtual void begin();
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate: virtual void arduino::MbedI2C::begin(uint8_t)
     virtual void begin(uint8_t address);
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:27:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();             // Init MFRC522
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:98:12: error: 'mfrc522' was not declared in this scope
   byte v = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
            ^~~~~~~

examples/dual_i2c_scanner_new

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:15:30: error: no matching function for call to 'arduino::MbedI2C::MbedI2C(int)'
 TwoWire i2cBusOne = TwoWire(0);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note: candidate: arduino::MbedI2C::MbedI2C(PinName, PinName)
     MbedI2C(PinName sda, PinName scl);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note:   candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note: candidate: arduino::MbedI2C::MbedI2C(int, int)
     MbedI2C(int sda, int scl);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note:   candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:16:30: error: no matching function for call to 'arduino::MbedI2C::MbedI2C(int)'
 TwoWire i2cBusTwo = TwoWire(1);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note: candidate: arduino::MbedI2C::MbedI2C(PinName, PinName)
     MbedI2C(PinName sda, PinName scl);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:38:5: note:   candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note: candidate: arduino::MbedI2C::MbedI2C(int, int)
     MbedI2C(int sda, int scl);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:37:5: note:   candidate expects 2 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:17:1: error: 'MFRC522' does not name a type; did you mean 'MFRC522_I2C'?
 MFRC522 mfrc522(chipAddress, RST_PIN, i2cBusTwo);
 ^~~~~~~
 MFRC522_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:24:43: error: no matching function for call to 'arduino::MbedI2C::begin(int, int, int)'
   i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
                                           ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate: virtual void arduino::MbedI2C::begin()
     virtual void begin();
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate: virtual void arduino::MbedI2C::begin(uint8_t)
     virtual void begin(uint8_t address);
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:26:51: error: no matching function for call to 'arduino::MbedI2C::begin(int, int, int)'
   i2cBusTwo.begin(ext_IIC_DATA, ext_IIC_CLK, 40000);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note: candidate: virtual void arduino::MbedI2C::begin()
     virtual void begin();
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:39:18: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note: candidate: virtual void arduino::MbedI2C::begin(uint8_t)
     virtual void begin(uint8_t address);
                  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/mbed_nano/2.7.2/libraries/Wire/Wire.h:43:18: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:28:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:36:6: error: 'mfrc522' was not declared in this scope
  if (mfrc522.PCD_PerformSelfTest()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:113:17: error: 'mfrc522' was not declared in this scope
  byte version = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
                 ^~~~~~~

examples/mfrc522_i2c

Result: FAIL

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp: In member function 'void MFRC522_I2C::PCD_WriteRegister(byte, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:42:50: error: call of overloaded 'beginTransmission(uint16_t&)' is ambiguous
  _TwoWireInstance->beginTransmission(_chipAddress);
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.h:82:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:57:10: note: candidate: virtual void TwoWire::beginTransmission(uint8_t)
     void beginTransmission(uint8_t);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:58:10: note: candidate: void TwoWire::beginTransmission(int)
     void beginTransmission(int);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp: In member function 'void MFRC522_I2C::PCD_WriteRegister(byte, byte, byte*)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:60:50: error: call of overloaded 'beginTransmission(uint16_t&)' is ambiguous
  _TwoWireInstance->beginTransmission(_chipAddress);
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.h:82:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:57:10: note: candidate: virtual void TwoWire::beginTransmission(uint8_t)
     void beginTransmission(uint8_t);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:58:10: note: candidate: void TwoWire::beginTransmission(int)
     void beginTransmission(int);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp: In member function 'byte MFRC522_I2C::PCD_ReadRegister(byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:79:50: error: call of overloaded 'beginTransmission(uint16_t&)' is ambiguous
  _TwoWireInstance->beginTransmission(_chipAddress);
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.h:82:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:57:10: note: candidate: virtual void TwoWire::beginTransmission(uint8_t)
     void beginTransmission(uint8_t);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:58:10: note: candidate: void TwoWire::beginTransmission(int)
     void beginTransmission(int);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp: In member function 'void MFRC522_I2C::PCD_ReadRegister(byte, byte, byte*, byte)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:103:50: error: call of overloaded 'beginTransmission(uint16_t&)' is ambiguous
  _TwoWireInstance->beginTransmission(_chipAddress);
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.h:82:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/src/MFRC522_I2C.cpp:10:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:57:10: note: candidate: virtual void TwoWire::beginTransmission(uint8_t)
     void beginTransmission(uint8_t);
          ^~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:58:10: note: candidate: void TwoWire::beginTransmission(int)
     void beginTransmission(int);
          ^~~~~~~~~~~~~~~~~

examples/dual_i2c_scanner

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:13:30: error: no matching function for call to 'TwoWire::TwoWire(int)'
 TwoWire i2cBusOne = TwoWire(0);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note: candidate: TwoWire::TwoWire()
     TwoWire();
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note:   candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
 class TwoWire : public HardwareI2C
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note:   no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note:   no known conversion for argument 1 from 'int' to 'TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:14:30: error: no matching function for call to 'TwoWire::TwoWire(int)'
 TwoWire i2cBusTwo = TwoWire(1);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note: candidate: TwoWire::TwoWire()
     TwoWire();
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note:   candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
 class TwoWire : public HardwareI2C
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note:   no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note:   no known conversion for argument 1 from 'int' to 'TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:15:1: error: 'MFRC522' does not name a type; did you mean 'MFRC522_I2C'?
 MFRC522 mfrc522(RST_PIN , 0x28, i2cBusTwo);
 ^~~~~~~
 MFRC522_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:19:43: error: no matching function for call to 'TwoWire::begin(int, int, long int)'
   i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
                                           ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate: virtual void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate: virtual void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:20:51: error: no matching function for call to 'TwoWire::begin(int, int, long int)'
   i2cBusTwo.begin(ext_IIC_DATA, ext_IIC_CLK, 40000);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate: virtual void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate: virtual void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:27:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();             // Init MFRC522
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:98:12: error: 'mfrc522' was not declared in this scope
   byte v = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
            ^~~~~~~

examples/dual_i2c_scanner_new

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:15:30: error: no matching function for call to 'TwoWire::TwoWire(int)'
 TwoWire i2cBusOne = TwoWire(0);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note: candidate: TwoWire::TwoWire()
     TwoWire();
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note:   candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
 class TwoWire : public HardwareI2C
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note:   no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note:   no known conversion for argument 1 from 'int' to 'TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:16:30: error: no matching function for call to 'TwoWire::TwoWire(int)'
 TwoWire i2cBusTwo = TwoWire(1);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note: candidate: TwoWire::TwoWire()
     TwoWire();
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:51:5: note:   candidate expects 0 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(const TwoWire&)
 class TwoWire : public HardwareI2C
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note:   no known conversion for argument 1 from 'int' to 'const TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note: candidate: constexpr TwoWire::TwoWire(TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:33:7: note:   no known conversion for argument 1 from 'int' to 'TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:17:1: error: 'MFRC522' does not name a type; did you mean 'MFRC522_I2C'?
 MFRC522 mfrc522(chipAddress, RST_PIN, i2cBusTwo);
 ^~~~~~~
 MFRC522_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:24:43: error: no matching function for call to 'TwoWire::begin(int, int, long int)'
   i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
                                           ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate: virtual void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate: virtual void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:26:51: error: no matching function for call to 'TwoWire::begin(int, int, long int)'
   i2cBusTwo.begin(ext_IIC_DATA, ext_IIC_CLK, 40000);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note: candidate: virtual void TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:52:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note: candidate: virtual void TwoWire::begin(uint8_t)
     void begin(uint8_t);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:53:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note: candidate: void TwoWire::begin(int)
     void begin(int);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:54:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:28:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:36:6: error: 'mfrc522' was not declared in this scope
  if (mfrc522.PCD_PerformSelfTest()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:113:17: error: 'mfrc522' was not declared in this scope
  byte version = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
                 ^~~~~~~

examples/mfrc522_i2c

Result: FAIL

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 13584 bytes (5%) of program storage space. Maximum is 262144 bytes.
Global variables use 3568 bytes (10%) of dynamic memory, leaving 29200 bytes for local variables. Maximum is 32768 bytes.

examples/dual_i2c_scanner

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:13:30: error: no matching function for call to 'arduino::TwoWire::TwoWire(int)'
 TwoWire i2cBusOne = TwoWire(0);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note: candidate: arduino::TwoWire::TwoWire(SERCOM*, uint8_t, uint8_t)
     TwoWire(SERCOM *s, uint8_t pinSDA, uint8_t pinSCL);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note:   candidate expects 3 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(const arduino::TwoWire&)
 class TwoWire : public HardwareI2C
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note:   no known conversion for argument 1 from 'int' to 'const arduino::TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(arduino::TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note:   no known conversion for argument 1 from 'int' to 'arduino::TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:14:30: error: no matching function for call to 'arduino::TwoWire::TwoWire(int)'
 TwoWire i2cBusTwo = TwoWire(1);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note: candidate: arduino::TwoWire::TwoWire(SERCOM*, uint8_t, uint8_t)
     TwoWire(SERCOM *s, uint8_t pinSDA, uint8_t pinSCL);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note:   candidate expects 3 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(const arduino::TwoWire&)
 class TwoWire : public HardwareI2C
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note:   no known conversion for argument 1 from 'int' to 'const arduino::TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(arduino::TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note:   no known conversion for argument 1 from 'int' to 'arduino::TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:15:1: error: 'MFRC522' does not name a type; did you mean 'MFRC522_I2C'?
 MFRC522 mfrc522(RST_PIN , 0x28, i2cBusTwo);
 ^~~~~~~
 MFRC522_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:19:43: error: no matching function for call to 'arduino::TwoWire::begin(int, int, int)'
   i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
                                           ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note: candidate: virtual void arduino::TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note: candidate: void arduino::TwoWire::begin(uint8_t, bool)
     void begin(uint8_t address, bool enableGeneralCall);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note: candidate: virtual void arduino::TwoWire::begin(uint8_t)
     void begin(uint8_t address) {
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:20:51: error: no matching function for call to 'arduino::TwoWire::begin(int, int, int)'
   i2cBusTwo.begin(ext_IIC_DATA, ext_IIC_CLK, 40000);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note: candidate: virtual void arduino::TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note: candidate: void arduino::TwoWire::begin(uint8_t, bool)
     void begin(uint8_t address, bool enableGeneralCall);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note: candidate: virtual void arduino::TwoWire::begin(uint8_t)
     void begin(uint8_t address) {
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:27:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();             // Init MFRC522
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:98:12: error: 'mfrc522' was not declared in this scope
   byte v = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
            ^~~~~~~

examples/dual_i2c_scanner_new

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:15:30: error: no matching function for call to 'arduino::TwoWire::TwoWire(int)'
 TwoWire i2cBusOne = TwoWire(0);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note: candidate: arduino::TwoWire::TwoWire(SERCOM*, uint8_t, uint8_t)
     TwoWire(SERCOM *s, uint8_t pinSDA, uint8_t pinSCL);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note:   candidate expects 3 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(const arduino::TwoWire&)
 class TwoWire : public HardwareI2C
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note:   no known conversion for argument 1 from 'int' to 'const arduino::TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(arduino::TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note:   no known conversion for argument 1 from 'int' to 'arduino::TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:16:30: error: no matching function for call to 'arduino::TwoWire::TwoWire(int)'
 TwoWire i2cBusTwo = TwoWire(1);
                              ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note: candidate: arduino::TwoWire::TwoWire(SERCOM*, uint8_t, uint8_t)
     TwoWire(SERCOM *s, uint8_t pinSDA, uint8_t pinSCL);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:35:5: note:   candidate expects 3 arguments, 1 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(const arduino::TwoWire&)
 class TwoWire : public HardwareI2C
       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note:   no known conversion for argument 1 from 'int' to 'const arduino::TwoWire&'
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note: candidate: constexpr arduino::TwoWire::TwoWire(arduino::TwoWire&&)
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:32:7: note:   no known conversion for argument 1 from 'int' to 'arduino::TwoWire&&'
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:17:1: error: 'MFRC522' does not name a type; did you mean 'MFRC522_I2C'?
 MFRC522 mfrc522(chipAddress, RST_PIN, i2cBusTwo);
 ^~~~~~~
 MFRC522_I2C
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:24:43: error: no matching function for call to 'arduino::TwoWire::begin(int, int, int)'
   i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
                                           ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note: candidate: virtual void arduino::TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note: candidate: void arduino::TwoWire::begin(uint8_t, bool)
     void begin(uint8_t address, bool enableGeneralCall);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note: candidate: virtual void arduino::TwoWire::begin(uint8_t)
     void begin(uint8_t address) {
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:26:51: error: no matching function for call to 'arduino::TwoWire::begin(int, int, int)'
   i2cBusTwo.begin(ext_IIC_DATA, ext_IIC_CLK, 40000);
                                                   ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note: candidate: virtual void arduino::TwoWire::begin()
     void begin();
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:36:10: note:   candidate expects 0 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note: candidate: void arduino::TwoWire::begin(uint8_t, bool)
     void begin(uint8_t address, bool enableGeneralCall);
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:37:10: note:   candidate expects 2 arguments, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note: candidate: virtual void arduino::TwoWire::begin(uint8_t)
     void begin(uint8_t address) {
          ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/libraries/Wire/Wire.h:38:10: note:   candidate expects 1 argument, 3 provided
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:28:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:36:6: error: 'mfrc522' was not declared in this scope
  if (mfrc522.PCD_PerformSelfTest()) {
      ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:113:17: error: 'mfrc522' was not declared in this scope
  byte version = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
                 ^~~~~~~

examples/mfrc522_i2c

Result: FAIL

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 204934 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13968 bytes (4%) of dynamic memory, leaving 313712 bytes for local variables. Maximum is 327680 bytes.

examples/dual_i2c_scanner

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:15:1: error: 'MFRC522' does not name a type
 MFRC522 mfrc522(RST_PIN , 0x28, i2cBusTwo);
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:27:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();             // Init MFRC522
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner/dual_i2c_scanner.ino:98:12: error: 'mfrc522' was not declared in this scope
   byte v = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
            ^

examples/dual_i2c_scanner_new

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:17:1: error: 'MFRC522' does not name a type
 MFRC522 mfrc522(chipAddress, RST_PIN, i2cBusTwo);
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:28:3: error: 'mfrc522' was not declared in this scope
   mfrc522.PCD_Init();
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:36:6: error: 'mfrc522' was not declared in this scope
  if (mfrc522.PCD_PerformSelfTest()) {
      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino: In function 'void ShowReaderDetails()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MFRC522_I2C/examples/dual_i2c_scanner_new/dual_i2c_scanner_new.ino:113:17: error: 'mfrc522' was not declared in this scope
  byte version = mfrc522.PCD_ReadRegister(mfrc522.VersionReg);
                 ^

examples/mfrc522_i2c

Result: FAIL