MKRNB - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MKRNB

Version: 1.5.1
More details

Compatibility matrix

Board Claims compatibility Inclusion 
GPRSUdpNtpClient
 
NBSSLWebClient
 
NBWebClient
 
ReceiveSMS
 
SendSMS
 
Tools
arduino:avr:uno
1.8.4 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:mbed_nano:nanorp2040connect
2.7.2 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:megaavr:nona4809
1.8.7 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL
arduino:samd:mkrwifi1010
1.8.12 		Yes ⚠️ FAIL FAIL FAIL FAIL FAIL FAIL FAIL
esp32:esp32:d1_mini32
1.0.6 		No FAIL FAIL FAIL FAIL FAIL FAIL FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL 

WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /tmp/arduino-testlib802811699/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt

examples/GPRSUdpNtpClient

Result: FAIL 

WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/GPRSUdpNtpClient/GPRSUdpNtpClient.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt

examples/NBSSLWebClient

Result: FAIL 

WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/NBSSLWebClient/NBSSLWebClient.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt

examples/NBWebClient

Result: FAIL 

WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/NBWebClient/NBWebClient.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt

examples/ReceiveSMS

Result: FAIL 

WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/ReceiveSMS/ReceiveSMS.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt

examples/SendSMS

Result: FAIL 

WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/SendSMS/SendSMS.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt

examples/Tools

Result: FAIL 


					
				
				
arduino:mbed_nano:nanorp2040connect @ 2.7.2

				
Inclusion

				

					Result: FAIL
					
				

				
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /tmp/arduino-testlib1061716229/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt




					
					
examples/GPRSUdpNtpClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/GPRSUdpNtpClient/GPRSUdpNtpClient.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/NBSSLWebClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/NBSSLWebClient/NBSSLWebClient.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/NBWebClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/NBWebClient/NBWebClient.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/ReceiveSMS

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/ReceiveSMS/ReceiveSMS.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/SendSMS

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/SendSMS/SendSMS.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/Tools

					

						Result: FAIL
					

					

					
				
				
arduino:megaavr:nona4809 @ 1.8.7

				
Inclusion

				

					Result: FAIL
					
				

				
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /tmp/arduino-testlib1061716229/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt




					
					
examples/GPRSUdpNtpClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/GPRSUdpNtpClient/GPRSUdpNtpClient.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/NBSSLWebClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/NBSSLWebClient/NBSSLWebClient.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/NBWebClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/NBWebClient/NBWebClient.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/ReceiveSMS

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/ReceiveSMS/ReceiveSMS.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/SendSMS

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/SendSMS/SendSMS.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type; did you mean 'sqrt'?
   Uart* _uart;
   ^~~~
   sqrt



					
					
examples/Tools

					

						Result: FAIL
					

					

					
				
				
arduino:samd:mkrwifi1010 @ 1.8.12

				
Inclusion

				

					Result: FAIL
					
				

				


					
					
examples/GPRSUdpNtpClient

					

						Result: FAIL
					

					

					
					
examples/NBSSLWebClient

					

						Result: FAIL
					

					

					
					
examples/NBWebClient

					

						Result: FAIL
					

					

					
					
examples/ReceiveSMS

					

						Result: FAIL
					

					

					
					
examples/SendSMS

					

						Result: FAIL
					

					

					
					
examples/Tools

					

						Result: FAIL
					

					

					
				
				
esp32:esp32:d1_mini32 @ 1.0.6

				
Inclusion

				

					Result: FAIL
					
				

				
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /tmp/arduino-testlib1054505080/test/test.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type
   Uart* _uart;
   ^




					
					
examples/GPRSUdpNtpClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/GPRSUdpNtpClient/GPRSUdpNtpClient.ino:22:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type
   Uart* _uart;
   ^



					
					
examples/NBSSLWebClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/NBSSLWebClient/NBSSLWebClient.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type
   Uart* _uart;
   ^



					
					
examples/NBWebClient

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/NBWebClient/NBWebClient.ino:18:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type
   Uart* _uart;
   ^



					
					
examples/ReceiveSMS

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/ReceiveSMS/ReceiveSMS.ino:17:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type
   Uart* _uart;
   ^



					
					
examples/SendSMS

					

						Result: FAIL
					

					
WARNING: library MKRNB claims to run on samd architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/GPRS.h:26:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/MKRNB.h:25,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/examples/SendSMS/SendSMS.ino:21:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:47:18: error: expected ')' before '&' token
   ModemClass(Uart& uart, unsigned long baud, int resetPin, int powerOnPin, int vIntPin=SARA_VINT);
                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRNB/src/Modem.h:84:3: error: 'Uart' does not name a type
   Uart* _uart;
   ^



					
					
examples/Tools

					

						Result: FAIL