MKRWAN - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MKRWAN

Version: 1.1.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	DumbModemLoraSender	FWUpdaterBridge	FirstConfiguration	LoraSendAndReceive	MKRWANFWUpdate_standalone
arduino:avr:uno 1.8.4	No ⚠️	PASS	PASS	FAIL	PASS	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No ⚠️	PASS	PASS	FAIL	PASS	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	No ⚠️	PASS	PASS	FAIL	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	PASS	FAIL	PASS	PASS	FAIL
esp32:esp32:d1_mini32 1.0.6	No ⚠️	PASS	PASS	FAIL	PASS	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/DumbModemLoraSender

Result: PASS

Sketch uses 3652 bytes (11%) of program storage space. Maximum is 32256 bytes.
Global variables use 306 bytes (14%) of dynamic memory, leaving 1742 bytes for local variables. Maximum is 2048 bytes.

examples/FWUpdaterBridge

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:13:3: error: 'Serial2' was not declared in this scope
   Serial2.begin(115200, SERIAL_8E1);
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:13:3: note: suggested alternative: 'Serial'
   Serial2.begin(115200, SERIAL_8E1);
   ^~~~~~~
   Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
   pinMode(LORA_BOOT0, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:51:5: error: 'Serial2' was not declared in this scope
     Serial2.write(tx_buf, tx);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:51:5: note: suggested alternative: 'Serial'
     Serial2.write(tx_buf, tx);
     ^~~~~~~
     Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:55:10: error: 'Serial2' was not declared in this scope
   while (Serial2.available()) {      // If anything comes in Serial (USB),
          ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:55:10: note: suggested alternative: 'Serial'
   while (Serial2.available()) {      // If anything comes in Serial (USB),
          ^~~~~~~
          Serial

examples/FirstConfiguration

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 11572 bytes (35%) of program storage space. Maximum is 32256 bytes.
Global variables use 1715 bytes (83%) of dynamic memory, leaving 333 bytes for local variables. Maximum is 2048 bytes.
Low memory available, stability problems may occur.

examples/LoraSendAndReceive

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on avr architecture(s).
Sketch uses 10834 bytes (33%) of program storage space. Maximum is 32256 bytes.
Global variables use 1612 bytes (78%) of dynamic memory, leaving 436 bytes for local variables. Maximum is 2048 bytes.
Low memory available, stability problems may occur.

examples/MKRWANFWUpdate_standalone

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/serial_arduino.h:9:10: fatal error: Uart.h: No such file or directory
 #include "Uart.h"
          ^~~~~~~~
compilation terminated.

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/DumbModemLoraSender

Result: PASS

Sketch uses 82498 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43684 bytes (16%) of dynamic memory, leaving 226652 bytes for local variables. Maximum is 270336 bytes.

examples/FWUpdaterBridge

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
   pinMode(LORA_BOOT0, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: note: suggested alternative: 'NINA_RESETN'
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
           NINA_RESETN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: note: suggested alternative: 'NINA_RESETN'
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
                NINA_RESETN

examples/FirstConfiguration

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 85900 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44112 bytes (16%) of dynamic memory, leaving 226224 bytes for local variables. Maximum is 270336 bytes.

examples/LoraSendAndReceive

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 85380 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 44076 bytes (16%) of dynamic memory, leaving 226260 bytes for local variables. Maximum is 270336 bytes.

examples/MKRWANFWUpdate_standalone

Result: FAIL

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:38:18: error: 'SerialLoRa' was not declared in this scope
   port.dev   =  &SerialLoRa;
                  ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:38:18: note: suggested alternative: 'SerialNina'
   port.dev   =  &SerialLoRa;
                  ^~~~~~~~~~
                  SerialNina
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:44:11: error: 'LORA_BOOT0' was not declared in this scope
   pinMode(LORA_BOOT0, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:44:11: note: suggested alternative: 'LORA_OK'
   pinMode(LORA_BOOT0, OUTPUT);
           ^~~~~~~~~~
           LORA_OK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:46:11: error: 'LORA_RESET' was not declared in this scope
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:46:11: note: suggested alternative: 'NINA_RESETN'
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
           NINA_RESETN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino: In function 'void resetModuleRunning()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:269:16: error: 'LORA_BOOT0' was not declared in this scope
   digitalWrite(LORA_BOOT0, LOW);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:269:16: note: suggested alternative: 'LORA_OK'
   digitalWrite(LORA_BOOT0, LOW);
                ^~~~~~~~~~
                LORA_OK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:270:3: error: 'SerialLoRa' was not declared in this scope
   SerialLoRa.end();
   ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:270:3: note: suggested alternative: 'SerialNina'
   SerialLoRa.end();
   ^~~~~~~~~~
   SerialNina
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:273:16: error: 'LORA_RESET' was not declared in this scope
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:273:16: note: suggested alternative: 'NINA_RESETN'
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
                NINA_RESETN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:285:5: error: 'SerialLoRa' was not declared in this scope
     SerialLoRa.end();
     ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:285:5: note: suggested alternative: 'SerialNina'
     SerialLoRa.end();
     ^~~~~~~~~~
     SerialNina

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/DumbModemLoraSender

Result: PASS

Sketch uses 7333 bytes (14%) of program storage space. Maximum is 49152 bytes.
Global variables use 399 bytes (6%) of dynamic memory, leaving 5745 bytes for local variables. Maximum is 6144 bytes.

examples/FWUpdaterBridge

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:13:3: error: 'Serial2' was not declared in this scope
   Serial2.begin(115200, SERIAL_8E1);
   ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:13:3: note: suggested alternative: 'Serial1'
   Serial2.begin(115200, SERIAL_8E1);
   ^~~~~~~
   Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
   pinMode(LORA_BOOT0, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: note: suggested alternative: 'PORTA_OUT'
   pinMode(LORA_BOOT0, OUTPUT);
           ^~~~~~~~~~
           PORTA_OUT
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: note: suggested alternative: 'MSC_RESET'
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
           MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: note: suggested alternative: 'MSC_RESET'
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
                MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:51:5: error: 'Serial2' was not declared in this scope
     Serial2.write(tx_buf, tx);
     ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:51:5: note: suggested alternative: 'Serial1'
     Serial2.write(tx_buf, tx);
     ^~~~~~~
     Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:55:10: error: 'Serial2' was not declared in this scope
   while (Serial2.available()) {      // If anything comes in Serial (USB),
          ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:55:10: note: suggested alternative: 'Serial1'
   while (Serial2.available()) {      // If anything comes in Serial (USB),
          ^~~~~~~
          Serial1

examples/FirstConfiguration

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 12656 bytes (25%) of program storage space. Maximum is 49152 bytes.
Global variables use 788 bytes (12%) of dynamic memory, leaving 5356 bytes for local variables. Maximum is 6144 bytes.

examples/LoraSendAndReceive

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 11890 bytes (24%) of program storage space. Maximum is 49152 bytes.
Global variables use 771 bytes (12%) of dynamic memory, leaving 5373 bytes for local variables. Maximum is 6144 bytes.

examples/MKRWANFWUpdate_standalone

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/serial_arduino.h:9:10: fatal error: Uart.h: No such file or directory
 #include "Uart.h"
          ^~~~~~~~
compilation terminated.

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/DumbModemLoraSender

Result: PASS

Sketch uses 16016 bytes (6%) of program storage space. Maximum is 262144 bytes.
Global variables use 3288 bytes (10%) of dynamic memory, leaving 29480 bytes for local variables. Maximum is 32768 bytes.

examples/FWUpdaterBridge

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
   pinMode(LORA_BOOT0, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: note: suggested alternative: 'PORT_BITS'
   pinMode(LORA_BOOT0, OUTPUT);
           ^~~~~~~~~~
           PORT_BITS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: note: suggested alternative: 'MSC_RESET'
   pinMode(LORA_RESET, OUTPUT);
           ^~~~~~~~~~
           MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: note: suggested alternative: 'MSC_RESET'
   digitalWrite(LORA_RESET, HIGH);
                ^~~~~~~~~~
                MSC_RESET

examples/FirstConfiguration

Result: PASS

Sketch uses 19940 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 4028 bytes (12%) of dynamic memory, leaving 28740 bytes for local variables. Maximum is 32768 bytes.

examples/LoraSendAndReceive

Result: PASS

Sketch uses 19300 bytes (7%) of program storage space. Maximum is 262144 bytes.
Global variables use 3996 bytes (12%) of dynamic memory, leaving 28772 bytes for local variables. Maximum is 32768 bytes.

examples/MKRWANFWUpdate_standalone

Result: FAIL

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 197736 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13084 bytes (3%) of dynamic memory, leaving 314596 bytes for local variables. Maximum is 327680 bytes.

examples/DumbModemLoraSender

Result: PASS

Sketch uses 209974 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13560 bytes (4%) of dynamic memory, leaving 314120 bytes for local variables. Maximum is 327680 bytes.

examples/FWUpdaterBridge

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
   pinMode(LORA_BOOT0, OUTPUT);
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
   pinMode(LORA_RESET, OUTPUT);
           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
   digitalWrite(LORA_RESET, HIGH);
                ^

examples/FirstConfiguration

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 213226 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14080 bytes (4%) of dynamic memory, leaving 313600 bytes for local variables. Maximum is 327680 bytes.

examples/LoraSendAndReceive

Result: PASS

WARNING: library MKRWAN claims to run on samd, mbed, mbed_portenta architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 212410 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14048 bytes (4%) of dynamic memory, leaving 313632 bytes for local variables. Maximum is 327680 bytes.

examples/MKRWANFWUpdate_standalone

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN/examples/MKRWANFWUpdate_standalone/serial_arduino.h:9:18: fatal error: Uart.h: No such file or directory
compilation terminated.