This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 1.3.2
More details
| Board | Claims compatibility | Inclusion | FWUpdaterBridge |
FirstConfiguration |
LoraSendAndReceive |
MKRWANFWUpdate_standalone |
|---|---|---|---|---|---|---|
|
arduino:avr:uno
1.8.4 |
No ⚠️ | PASS | FAIL | PASS | PASS | FAIL |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
No ⚠️ | PASS | FAIL | PASS | PASS | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
No ⚠️ | PASS | FAIL | PASS | PASS | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS | FAIL | PASS | PASS | FAIL |
|
esp32:esp32:d1_mini32
1.0.6 |
No ⚠️ | PASS | FAIL | PASS | PASS | FAIL |
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 956 bytes (2%) of program storage space. Maximum is 32256 bytes. Global variables use 33 bytes (1%) of dynamic memory, leaving 2015 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:13:3: error: 'Serial2' was not declared in this scope
Serial2.begin(115200, SERIAL_8E1);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:13:3: note: suggested alternative: 'Serial'
Serial2.begin(115200, SERIAL_8E1);
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
pinMode(LORA_BOOT0, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:51:5: error: 'Serial2' was not declared in this scope
Serial2.write(tx_buf, tx);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:51:5: note: suggested alternative: 'Serial'
Serial2.write(tx_buf, tx);
^~~~~~~
Serial
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:55:10: error: 'Serial2' was not declared in this scope
while (Serial2.available()) { // If anything comes in Serial (USB),
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:55:10: note: suggested alternative: 'Serial'
while (Serial2.available()) { // If anything comes in Serial (USB),
^~~~~~~
Serial
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 13464 bytes (41%) of program storage space. Maximum is 32256 bytes. Global variables use 1598 bytes (78%) of dynamic memory, leaving 450 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on avr architecture(s). Sketch uses 13264 bytes (41%) of program storage space. Maximum is 32256 bytes. Global variables use 1653 bytes (80%) of dynamic memory, leaving 395 bytes for local variables. Maximum is 2048 bytes. Low memory available, stability problems may occur.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/serial_arduino.h:9:10: fatal error: Uart.h: No such file or directory
#include "Uart.h"
^~~~~~~~
compilation terminated.
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 78800 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 43464 bytes (16%) of dynamic memory, leaving 226872 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
pinMode(LORA_BOOT0, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: note: suggested alternative: 'NINA_RESETN'
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
NINA_RESETN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: note: suggested alternative: 'NINA_RESETN'
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
NINA_RESETN
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 86808 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44100 bytes (16%) of dynamic memory, leaving 226236 bytes for local variables. Maximum is 270336 bytes.
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s). Sketch uses 86612 bytes (0%) of program storage space. Maximum is 16777216 bytes. Global variables use 44064 bytes (16%) of dynamic memory, leaving 226272 bytes for local variables. Maximum is 270336 bytes.
Result: FAIL
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 1264 bytes (2%) of program storage space. Maximum is 49152 bytes. Global variables use 34 bytes (0%) of dynamic memory, leaving 6110 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:13:3: error: 'Serial2' was not declared in this scope
Serial2.begin(115200, SERIAL_8E1);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:13:3: note: suggested alternative: 'Serial1'
Serial2.begin(115200, SERIAL_8E1);
^~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
pinMode(LORA_BOOT0, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: note: suggested alternative: 'PORTA_OUT'
pinMode(LORA_BOOT0, OUTPUT);
^~~~~~~~~~
PORTA_OUT
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: note: suggested alternative: 'MSC_RESET'
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: note: suggested alternative: 'MSC_RESET'
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:51:5: error: 'Serial2' was not declared in this scope
Serial2.write(tx_buf, tx);
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:51:5: note: suggested alternative: 'Serial1'
Serial2.write(tx_buf, tx);
^~~~~~~
Serial1
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:55:10: error: 'Serial2' was not declared in this scope
while (Serial2.available()) { // If anything comes in Serial (USB),
^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:55:10: note: suggested alternative: 'Serial1'
while (Serial2.available()) { // If anything comes in Serial (USB),
^~~~~~~
Serial1
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 14465 bytes (29%) of program storage space. Maximum is 49152 bytes. Global variables use 781 bytes (12%) of dynamic memory, leaving 5363 bytes for local variables. Maximum is 6144 bytes.
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s). Sketch uses 14274 bytes (29%) of program storage space. Maximum is 49152 bytes. Global variables use 764 bytes (12%) of dynamic memory, leaving 5380 bytes for local variables. Maximum is 6144 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:16:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/serial_arduino.h:9:10: fatal error: Uart.h: No such file or directory
#include "Uart.h"
^~~~~~~~
compilation terminated.
Result: PASS
Sketch uses 12456 bytes (4%) of program storage space. Maximum is 262144 bytes. Global variables use 3020 bytes (9%) of dynamic memory, leaving 29748 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
pinMode(LORA_BOOT0, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: note: suggested alternative: 'PORT_BITS'
pinMode(LORA_BOOT0, OUTPUT);
^~~~~~~~~~
PORT_BITS
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: note: suggested alternative: 'MSC_RESET'
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: note: suggested alternative: 'MSC_RESET'
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
MSC_RESET
Result: PASS
Sketch uses 20852 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 4024 bytes (12%) of dynamic memory, leaving 28744 bytes for local variables. Maximum is 32768 bytes.
Result: PASS
Sketch uses 20732 bytes (7%) of program storage space. Maximum is 262144 bytes. Global variables use 3992 bytes (12%) of dynamic memory, leaving 28776 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:38:18: error: 'SerialLoRa' was not declared in this scope
port.dev = &SerialLoRa;
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:38:18: note: suggested alternative: 'SerialNina'
port.dev = &SerialLoRa;
^~~~~~~~~~
SerialNina
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:44:11: error: 'LORA_BOOT0' was not declared in this scope
pinMode(LORA_BOOT0, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:44:11: note: suggested alternative: 'LORA_OK'
pinMode(LORA_BOOT0, OUTPUT);
^~~~~~~~~~
LORA_OK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:46:11: error: 'LORA_RESET' was not declared in this scope
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:46:11: note: suggested alternative: 'MSC_RESET'
pinMode(LORA_RESET, OUTPUT);
^~~~~~~~~~
MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino: In function 'void resetModuleRunning()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:269:16: error: 'LORA_BOOT0' was not declared in this scope
digitalWrite(LORA_BOOT0, LOW);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:269:16: note: suggested alternative: 'LORA_OK'
digitalWrite(LORA_BOOT0, LOW);
^~~~~~~~~~
LORA_OK
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:270:3: error: 'SerialLoRa' was not declared in this scope
SerialLoRa.end();
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:270:3: note: suggested alternative: 'SerialNina'
SerialLoRa.end();
^~~~~~~~~~
SerialNina
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:273:16: error: 'LORA_RESET' was not declared in this scope
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:273:16: note: suggested alternative: 'MSC_RESET'
digitalWrite(LORA_RESET, HIGH);
^~~~~~~~~~
MSC_RESET
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:285:5: error: 'SerialLoRa' was not declared in this scope
SerialLoRa.end();
^~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:285:5: note: suggested alternative: 'SerialNina'
SerialLoRa.end();
^~~~~~~~~~
SerialNina
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 197768 bytes (15%) of program storage space. Maximum is 1310720 bytes. Global variables use 13100 bytes (3%) of dynamic memory, leaving 314580 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:18:11: error: 'LORA_BOOT0' was not declared in this scope
pinMode(LORA_BOOT0, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:20:11: error: 'LORA_RESET' was not declared in this scope
pinMode(LORA_RESET, OUTPUT);
^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino: In function 'void resetModule()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/FWUpdaterBridge/FWUpdaterBridge.ino:30:16: error: 'LORA_RESET' was not declared in this scope
digitalWrite(LORA_RESET, HIGH);
^
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 214670 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14064 bytes (4%) of dynamic memory, leaving 313616 bytes for local variables. Maximum is 327680 bytes.
Result: PASS
WARNING: library MKRWAN_v2 claims to run on samd, mbed architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s). Sketch uses 214382 bytes (16%) of program storage space. Maximum is 1310720 bytes. Global variables use 14032 bytes (4%) of dynamic memory, leaving 313648 bytes for local variables. Maximum is 327680 bytes.
Result: FAIL
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/MKRWANFWUpdate_standalone.ino:16:0: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MKRWAN_v2/examples/MKRWANFWUpdate_standalone/serial_arduino.h:9:18: fatal error: Uart.h: No such file or directory compilation terminated.