This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.
Version: 0.0.2
More details
| Board | Claims compatibility | Inclusion |
|---|---|---|
|
arduino:avr:uno
1.8.4 |
Yes | PASS |
|
arduino:mbed_nano:nanorp2040connect
2.7.2 |
Yes ⚠️ | FAIL |
|
arduino:megaavr:nona4809
1.8.7 |
Yes ⚠️ | FAIL |
|
arduino:samd:mkrwifi1010
1.8.12 |
Yes | PASS |
|
esp32:esp32:d1_mini32
1.0.6 |
Yes ⚠️ | FAIL |
Result: PASS
Sketch uses 1830 bytes (5%) of program storage space. Maximum is 32256 bytes. Global variables use 206 bytes (10%) of dynamic memory, leaving 1842 bytes for local variables. Maximum is 2048 bytes.
Result: FAIL
Result: FAIL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:17:17: error: 'MODI_CS_PIN' was not declared in this scope
MCP_CAN CAN(MODI_CS_PIN);
^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:17:17: note: suggested alternative: 'MODE_CONFIG'
MCP_CAN CAN(MODI_CS_PIN);
^~~~~~~~~~~
MODE_CONFIG
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp: In member function 'void MODI_Manager::begin()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:42:13: error: 'MODI_INT_PIN' was not declared in this scope
pinMode(MODI_INT_PIN,INPUT_PULLUP);
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:42:13: note: suggested alternative: 'MODI_CAN'
pinMode(MODI_INT_PIN,INPUT_PULLUP);
^~~~~~~~~~~~
MODI_CAN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp: In function 'void MODI_Message_Handler()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1900:28: error: 'MODI_PRINT_F' was not declared in this scope
if (ModuleID == 0x0000) MODI_PRINT_F("AssignID received. Module Network - ID: 0x");//case Network
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1900:28: note: suggested alternative: 'MODI_H_'
if (ModuleID == 0x0000) MODI_PRINT_F("AssignID received. Module Network - ID: 0x");//case Network
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1901:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x2000) MODI_PRINT_F("AssignID received. Module Environment - ID: 0x");//case Environment
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1901:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x2000) MODI_PRINT_F("AssignID received. Module Environment - ID: 0x");//case Environment
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1902:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x2010) MODI_PRINT_F("AssignID received. Module Gyroscope - ID: 0x");//case Gyroscope
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1902:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x2010) MODI_PRINT_F("AssignID received. Module Gyroscope - ID: 0x");//case Gyroscope
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1903:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x2020) MODI_PRINT_F("AssignID received. Module Mic - ID: 0x");//case Mic
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1903:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x2020) MODI_PRINT_F("AssignID received. Module Mic - ID: 0x");//case Mic
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1904:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x2030) MODI_PRINT_F("AssignID received. Module Button - ID: 0x");//case Button
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1904:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x2030) MODI_PRINT_F("AssignID received. Module Button - ID: 0x");//case Button
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1905:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x2040) MODI_PRINT_F("AssignID received. Module Dial - ID: 0x");//case Dial
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1905:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x2040) MODI_PRINT_F("AssignID received. Module Dial - ID: 0x");//case Dial
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1906:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x2050) MODI_PRINT_F("AssignID received. Module Ultrasonic - ID: 0x");//case Ultrasonic
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1906:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x2050) MODI_PRINT_F("AssignID received. Module Ultrasonic - ID: 0x");//case Ultrasonic
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1907:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x2060) MODI_PRINT_F("AssignID received. Module IR - ID: 0x");//case IR
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1907:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x2060) MODI_PRINT_F("AssignID received. Module IR - ID: 0x");//case IR
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1908:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x4000) MODI_PRINT_F("AssignID received. Module Display - ID: 0x");//case Display
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1908:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x4000) MODI_PRINT_F("AssignID received. Module Display - ID: 0x");//case Display
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1909:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x4010) MODI_PRINT_F("AssignID received. Module Motor - ID: 0x");//case Motor
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1909:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x4010) MODI_PRINT_F("AssignID received. Module Motor - ID: 0x");//case Motor
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1910:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x4020) MODI_PRINT_F("AssignID received. Module LED - ID: 0x");//case LED
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1910:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x4020) MODI_PRINT_F("AssignID received. Module LED - ID: 0x");//case LED
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1911:33: error: 'MODI_PRINT_F' was not declared in this scope
else if (ModuleID == 0x4030) MODI_PRINT_F("AssignID received. Module Speaker - ID: 0x");//case Speaker
^~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1911:33: note: suggested alternative: 'MODI_H_'
else if (ModuleID == 0x4030) MODI_PRINT_F("AssignID received. Module Speaker - ID: 0x");//case Speaker
^~~~~~~~~~~~
MODI_H_
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MODI/src/MODI.cpp:1913:4: error: 'MODI_PRINTLN' was not declared in this scope
MODI_PRINTLN(pkt.sid, HEX);
^~~~~~~~~~~~
Result: PASS
Sketch uses 13468 bytes (5%) of program storage space. Maximum is 262144 bytes. Global variables use 3580 bytes (10%) of dynamic memory, leaving 29188 bytes for local variables. Maximum is 32768 bytes.
Result: FAIL