MicroDebug - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MicroDebug

Version: 1.2.0
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	FormattingSerialDebug	LedDebug	SerialDebug
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	PASS	PASS	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	PASS	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib1631507232/test/test.ino:1:10: fatal error: MicroDebug.h: No such file or directory
 #include <MicroDebug.h>
          ^~~~~~~~~~~~~~
compilation terminated.

examples/FormattingSerialDebug

Result: PASS

Sketch uses 4196 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 246 bytes (12%) of dynamic memory, leaving 1802 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^

examples/LedDebug

Result: PASS

Sketch uses 2036 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^

examples/SerialDebug

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:2: error: 'SERIAL_DEBUG_SETUP' was not declared in this scope
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:2: note: suggested alternative: 'SERIAL_DEBUG_H'
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
  SERIAL_DEBUG_H
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:16:2: error: 'DEBUG' was not declared in this scope
  DEBUG("Available memory", free());
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:24:2: error: 'DEBUG' was not declared in this scope
  DEBUG("analog read", val);
  ^~~~~
Multiple libraries were found for "SerialDebug.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SerialDebug
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib485782370/test/test.ino:1:10: fatal error: MicroDebug.h: No such file or directory
 #include <MicroDebug.h>
          ^~~~~~~~~~~~~~
compilation terminated.

examples/FormattingSerialDebug

Result: FAIL

WARNING: library MicroDebug claims to run on avr, esp8266 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:12:2: error: 'SERIAL_DEBUG_SETUP' was not declared in this scope
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:12:2: note: suggested alternative: 'SERIAL_DEBUG_IMPL'
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
  SERIAL_DEBUG_IMPL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:13:2: error: 'DEBUG' was not declared in this scope
  DEBUG("Free memory is %u bytes", free());
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:21:2: error: 'DEBUG' was not declared in this scope
  DEBUG("analog read is %u", val);
  ^~~~~

examples/LedDebug

Result: PASS

WARNING: library MicroDebug claims to run on avr, esp8266 architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
Sketch uses 79828 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43516 bytes (16%) of dynamic memory, leaving 226820 bytes for local variables. Maximum is 270336 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^

examples/SerialDebug

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:2: error: 'SERIAL_DEBUG_SETUP' was not declared in this scope
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:2: note: suggested alternative: 'SERIAL_DEBUG_H'
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
  SERIAL_DEBUG_H
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:16:2: error: 'DEBUG' was not declared in this scope
  DEBUG("Available memory", free());
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:24:2: error: 'DEBUG' was not declared in this scope
  DEBUG("analog read", val);
  ^~~~~
Multiple libraries were found for "SerialDebug.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SerialDebug
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib485782370/test/test.ino:1:10: fatal error: MicroDebug.h: No such file or directory
 #include <MicroDebug.h>
          ^~~~~~~~~~~~~~
compilation terminated.

examples/FormattingSerialDebug

Result: PASS

WARNING: library MicroDebug claims to run on avr, esp8266 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 5295 bytes (10%) of program storage space. Maximum is 49152 bytes.
Global variables use 193 bytes (3%) of dynamic memory, leaving 5951 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^

examples/LedDebug

Result: PASS

WARNING: library MicroDebug claims to run on avr, esp8266 architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
Sketch uses 3132 bytes (6%) of program storage space. Maximum is 49152 bytes.
Global variables use 177 bytes (2%) of dynamic memory, leaving 5967 bytes for local variables. Maximum is 6144 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^

examples/SerialDebug

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:2: error: 'SERIAL_DEBUG_SETUP' was not declared in this scope
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:2: note: suggested alternative: 'SERIAL_DEBUG_H'
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
  SERIAL_DEBUG_H
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:16:2: error: 'DEBUG' was not declared in this scope
  DEBUG("Available memory", free());
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:24:2: error: 'DEBUG' was not declared in this scope
  DEBUG("analog read", val);
  ^~~~~
Multiple libraries were found for "SerialDebug.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SerialDebug
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib1631507232/test/test.ino:1:10: fatal error: MicroDebug.h: No such file or directory
 #include <MicroDebug.h>
          ^~~~~~~~~~~~~~
compilation terminated.

examples/FormattingSerialDebug

Result: FAIL

WARNING: library MicroDebug claims to run on avr, esp8266 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:12:2: error: 'SERIAL_DEBUG_SETUP' was not declared in this scope
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:12:2: note: suggested alternative: 'SERIAL_DEBUG_IMPL'
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
  SERIAL_DEBUG_IMPL
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:13:2: error: 'DEBUG' was not declared in this scope
  DEBUG("Free memory is %u bytes", free());
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:13:2: note: suggested alternative: '_DEFUN'
  DEBUG("Free memory is %u bytes", free());
  ^~~~~
  _DEFUN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:21:2: error: 'DEBUG' was not declared in this scope
  DEBUG("analog read is %u", val);
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:21:2: note: suggested alternative: '_DEFUN'
  DEBUG("analog read is %u", val);
  ^~~~~
  _DEFUN

examples/LedDebug

Result: FAIL

WARNING: library MicroDebug claims to run on avr, esp8266 architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp: In function 'void printf(const arduino::__FlashStringHelper*, ...)':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:32:2: error: 'va_start' was not declared in this scope
  va_start(args, format);
  ^~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:32:2: note: suggested alternative: 'u_short'
  va_start(args, format);
  ^~~~~~~~
  u_short
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:33:2: error: 'vsnprintf_P' was not declared in this scope
  vsnprintf_P(buffer, sizeof(buffer), (const char *)format, args); // progmem for AVR
  ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:33:2: note: suggested alternative: 'snprintf_P'
  vsnprintf_P(buffer, sizeof(buffer), (const char *)format, args); // progmem for AVR
  ^~~~~~~~~~~
  snprintf_P
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:34:2: error: 'va_end' was not declared in this scope
  va_end(args);
  ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:34:2: note: suggested alternative: 'rand'
  va_end(args);
  ^~~~~~
  rand

examples/SerialDebug

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:2: error: 'SERIAL_DEBUG_SETUP' was not declared in this scope
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:2: note: suggested alternative: 'SERIAL_DEBUG_H'
  SERIAL_DEBUG_SETUP(9600);
  ^~~~~~~~~~~~~~~~~~
  SERIAL_DEBUG_H
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:16:2: error: 'DEBUG' was not declared in this scope
  DEBUG("Available memory", free());
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:16:2: note: suggested alternative: '_DEFUN'
  DEBUG("Available memory", free());
  ^~~~~
  _DEFUN
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:24:2: error: 'DEBUG' was not declared in this scope
  DEBUG("analog read", val);
  ^~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:24:2: note: suggested alternative: '_DEFUN'
  DEBUG("analog read", val);
  ^~~~~
  _DEFUN
Multiple libraries were found for "SerialDebug.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SerialDebug
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3604888165/test/test.ino:1:24: fatal error: MicroDebug.h: No such file or directory
compilation terminated.

examples/FormattingSerialDebug

Result: FAIL

WARNING: library MicroDebug claims to run on avr, esp8266 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:3:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:12:25: error: 'SERIAL_DEBUG_SETUP' was not declared in this scope
  SERIAL_DEBUG_SETUP(9600);
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:13:41: error: 'DEBUG' was not declared in this scope
  DEBUG("Free memory is %u bytes", free());
                                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/FormattingSerialDebug/FormattingSerialDebug.ino:21:32: error: 'DEBUG' was not declared in this scope
  DEBUG("analog read is %u", val);
                                ^

examples/LedDebug

Result: PASS

WARNING: library MicroDebug claims to run on avr, esp8266 architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
Sketch uses 216906 bytes (16%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13376 bytes (4%) of dynamic memory, leaving 314304 bytes for local variables. Maximum is 327680 bytes.
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.cpp:18:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/FormattingSerialDebug.h:23:50: note: #pragma message: FormattingSerialDebug ENABLED
   #pragma message("FormattingSerialDebug ENABLED")
                                                  ^

examples/SerialDebug

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:15:25: error: 'SERIAL_DEBUG_SETUP' was not declared in this scope
  SERIAL_DEBUG_SETUP(9600);
                         ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:16:34: error: 'DEBUG' was not declared in this scope
  DEBUG("Available memory", free());
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino: In function 'void loop()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug/examples/SerialDebug/SerialDebug.ino:24:26: error: 'DEBUG' was not declared in this scope
  DEBUG("analog read", val);
                          ^
Multiple libraries were found for "SerialDebug.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/SerialDebug
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroDebug