MicroNMEA - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

MicroNMEA

Version: 2.0.5
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	X_NUCLEO_GNSS1A1_MicroNMEA_I2C	X_NUCLEO_GNSS1A1_MicroNMEA_UART	demo
arduino:avr:uno 1.8.4	Yes	PASS	PASS	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	Yes	PASS	FAIL	PASS	FAIL
arduino:megaavr:nona4809 1.8.7	Yes	PASS	FAIL	PASS	FAIL
arduino:samd:mkrwifi1010 1.8.12	Yes	PASS	FAIL	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	Yes	PASS	FAIL	PASS	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: PASS

Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: PASS

Sketch uses 10308 bytes (31%) of program storage space. Maximum is 32256 bytes.
Global variables use 877 bytes (42%) of dynamic memory, leaving 1171 bytes for local variables. Maximum is 2048 bytes.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART/X_NUCLEO_GNSS1A1_MicroNMEA_UART.ino:53:23: error: 'Serial1' was not declared in this scope
 HardwareSerial& gps = Serial1;
                       ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART/X_NUCLEO_GNSS1A1_MicroNMEA_UART.ino:53:23: note: suggested alternative: 'Serial'
 HardwareSerial& gps = Serial1;
                       ^~~~~~~
                       Serial

examples/demo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/demo/demo.ino:84:2: error: #error Please configure interrupt handler code for alternative board.
 #error Please configure interrupt handler code for alternative board.
  ^~~~~

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: PASS

Sketch uses 78756 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43444 bytes (16%) of dynamic memory, leaving 226892 bytes for local variables. Maximum is 270336 bytes.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:67:16: error: 'DEV_I2C' was not declared in this scope
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:67:16: note: suggested alternative: 'DEVICE_I2C'
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
                DEVICE_I2C

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: PASS

Sketch uses 83186 bytes (0%) of program storage space. Maximum is 16777216 bytes.
Global variables use 43868 bytes (16%) of dynamic memory, leaving 226468 bytes for local variables. Maximum is 270336 bytes.

examples/demo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/demo/demo.ino:84:2: error: #error Please configure interrupt handler code for alternative board.
 #error Please configure interrupt handler code for alternative board.
  ^~~~~

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: PASS

Sketch uses 802 bytes (1%) of program storage space. Maximum is 49152 bytes.
Global variables use 22 bytes (0%) of dynamic memory, leaving 6122 bytes for local variables. Maximum is 6144 bytes.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:67:16: error: 'DEV_I2C' was not declared in this scope
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:44:0:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h: In function 'void readI2C(char*)':
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:63:12: note: candidate 1: size_t TwoWire::requestFrom(int, int)
     size_t requestFrom(int, int);
            ^~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/megaavr/1.8.7/libraries/Wire/src/Wire.h:61:12: note: candidate 2: virtual size_t TwoWire::requestFrom(uint8_t, size_t)
     size_t requestFrom(uint8_t, size_t);
            ^~~~~~~~~~~

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: PASS

Sketch uses 9229 bytes (18%) of program storage space. Maximum is 49152 bytes.
Global variables use 675 bytes (10%) of dynamic memory, leaving 5469 bytes for local variables. Maximum is 6144 bytes.

examples/demo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/demo/demo.ino:84:2: error: #error Please configure interrupt handler code for alternative board.
 #error Please configure interrupt handler code for alternative board.
  ^~~~~

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: PASS

Sketch uses 12156 bytes (4%) of program storage space. Maximum is 262144 bytes.
Global variables use 2996 bytes (9%) of dynamic memory, leaving 29772 bytes for local variables. Maximum is 32768 bytes.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
                 from /tmp/arduino-sketch-9E634DE2BB9B198531A2789A93D4FD14/sketch/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:222:37: error: invalid initialization of reference of type 'arduino::HardwareSerial&' from expression of type 'Serial_'
 #define Serial                      SerialUSB
                                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:66:27: note: in expansion of macro 'Serial'
 HardwareSerial& console = Serial;
                           ^~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:67:16: error: 'DEV_I2C' was not declared in this scope
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:67:16: note: suggested alternative: 'REV_I2S'
 TwoWire& gps = DEV_I2C;
                ^~~~~~~
                REV_I2S

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: FAIL

In file included from /home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/cores/arduino/Arduino.h:51:0,
                 from /tmp/arduino-sketch-D1C723AD2043119617CE024A5B34B72E/sketch/X_NUCLEO_GNSS1A1_MicroNMEA_UART.ino.cpp:1:
/home/ec2-user/arduino-testlib/cli-datadir/data/packages/arduino/hardware/samd/1.8.12/variants/mkrwifi1010/variant.h:222:37: error: invalid initialization of reference of type 'arduino::HardwareSerial&' from expression of type 'Serial_'
 #define Serial                      SerialUSB
                                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART/X_NUCLEO_GNSS1A1_MicroNMEA_UART.ino:52:27: note: in expansion of macro 'Serial'
 HardwareSerial& console = Serial;
                           ^~~~~~

examples/demo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/demo/demo.ino:84:2: error: #error Please configure interrupt handler code for alternative board.
 #error Please configure interrupt handler code for alternative board.
  ^~~~~

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: PASS

Sketch uses 197832 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 13092 bytes (3%) of dynamic memory, leaving 314588 bytes for local variables. Maximum is 327680 bytes.

examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/X_NUCLEO_GNSS1A1_MicroNMEA_I2C/X_NUCLEO_GNSS1A1_MicroNMEA_I2C.ino:67:16: error: 'DEV_I2C' was not declared in this scope
 TwoWire& gps = DEV_I2C;
                ^

examples/X_NUCLEO_GNSS1A1_MicroNMEA_UART

Result: PASS

Sketch uses 208514 bytes (15%) of program storage space. Maximum is 1310720 bytes.
Global variables use 14080 bytes (4%) of dynamic memory, leaving 313600 bytes for local variables. Maximum is 327680 bytes.

examples/demo

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/MicroNMEA/examples/demo/demo.ino:84:2: error: #error Please configure interrupt handler code for alternative board.
 #error Please configure interrupt handler code for alternative board.
  ^