ModbusRTU_Slave_RS485 - compatibility matrix

This report was generated on Wednesday, 23-Feb-22 22:48:15 CET using arduino-testlib.

ModbusRTU_Slave_RS485

Version: 1.0.2
More details

Compatibility matrix

Board	Claims compatibility	Inclusion	SimpleModbus
arduino:avr:uno 1.8.4	Yes ⚠️	FAIL	FAIL
arduino:mbed_nano:nanorp2040connect 2.7.2	No	FAIL	FAIL
arduino:megaavr:nona4809 1.8.7	No	FAIL	FAIL
arduino:samd:mkrwifi1010 1.8.12	No	FAIL	FAIL
esp32:esp32:d1_mini32 1.0.6	No	FAIL	FAIL

Compilation logs

arduino:avr:uno @ 1.8.4

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3312947811/test/test.ino:1:10: fatal error: ModbusRTU_Slave_RS485.h: No such file or directory
 #include <ModbusRTU_Slave_RS485.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/SimpleModbus

Result: FAIL

/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:14:40: error: 'Serial1' was not declared in this scope
 ModbusRTUSlave rtu(OUR_ID_AS_A_SLAVE, &Serial1, PIN_CONNECTED_TO_BOTH_DE_AND_RE);
                                        ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:14:40: note: suggested alternative: 'Serial'
 ModbusRTUSlave rtu(OUR_ID_AS_A_SLAVE, &Serial1, PIN_CONNECTED_TO_BOTH_DE_AND_RE);
                                        ^~~~~~~
                                        Serial
Multiple libraries were found for "ModbusRTUSlave.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave

arduino:mbed_nano:nanorp2040connect @ 2.7.2

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib515737403/test/test.ino:1:10: fatal error: ModbusRTU_Slave_RS485.h: No such file or directory
 #include <ModbusRTU_Slave_RS485.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/SimpleModbus

Result: FAIL

WARNING: library ModbusRTU_Slave_RS485 claims to run on avr architecture(s) and may be incompatible with your current board which runs on mbed_nano architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/utility/LinkedList.h:311:3: error: redeclaration of 'T LinkedList<T>::get(int, bool)' may not have default arguments [-fpermissive]
 T LinkedList<T>::get(int index, bool useCached = false){
   ^~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:10:3: error: 'u16' does not name a type; did you mean 'p16'?
   u16 addr;
   ^~~
   p16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:12:3: error: 'u16' does not name a type; did you mean 'p16'?
   u16 *values;
   ^~~
   p16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:13:33: error: expected ')' before 'Address'
   ModbusRTUSlaveWordAddress(u16 Address, u16* value, int cnt);
                                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:19:3: error: 'u16' does not name a type; did you mean 'p16'?
   u16 addr;
   ^~~
   p16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:21:3: error: 'u8' does not name a type; did you mean 'p8'?
   u8 *values;
   ^~
   p8
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:22:32: error: expected ')' before 'Address'
   ModbusRTUSlaveBitAddress(u16 Address, u8* value, int cnt);
                                ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:28:53: error: 'u8' has not been declared
   ModbusRTUSlave(byte slaveId, HardwareSerial *ser, u8 conrolPinNumber);
                                                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:30:23: error: 'u16' has not been declared
   boolean addWordArea(u16 Address, u16* values, int cnt);
                       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:30:36: error: 'u16' has not been declared
   boolean addWordArea(u16 Address, u16* values, int cnt);
                                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:31:22: error: 'u16' has not been declared
   boolean addBitArea(u16 Address, u8* values, int cnt);
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:31:35: error: 'u8' has not been declared
   boolean addBitArea(u16 Address, u8* values, int cnt);
                                   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:37:3: error: 'u8' does not name a type; did you mean 'p8'?
   u8 const controlPin;
   ^~
   p8
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:30: error: expected ';' at end of member declaration
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:49: error: expected ')' before 'Addr'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:29: error: expected ';' at end of member declaration
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:47: error: expected ')' before 'Addr'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:30: error: expected ';' at end of member declaration
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:45: error: redeclaration of 'ModbusRTUSlaveWordAddress* ModbusRTUSlave::getWordAddress'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                                             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:45: note: previous declaration 'ModbusRTUSlaveWordAddress* ModbusRTUSlave::getWordAddress'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                                             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:49: error: expected ')' before 'Addr'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:29: error: expected ';' at end of member declaration
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:43: error: redeclaration of 'ModbusRTUSlaveBitAddress* ModbusRTUSlave::getBitAddress'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                                           ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:43: note: previous declaration 'ModbusRTUSlaveBitAddress* ModbusRTUSlave::getBitAddress'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                                           ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:47: error: expected ')' before 'Addr'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:16: error: 'u8' was not declared in this scope
 boolean getBit(u8* area, int index);
                ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:16: note: suggested alternative: 'p8'
 boolean getBit(u8* area, int index);
                ^~
                p8
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:20: error: 'area' was not declared in this scope
 boolean getBit(u8* area, int index);
                    ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:20: note: suggested alternative: 'read'
 boolean getBit(u8* area, int index);
                    ^~~~
                    read
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:26: error: expected primary-expression before 'int'
 boolean getBit(u8* area, int index);
                          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:35: error: expression list treated as compound expression in initializer [-fpermissive]
 boolean getBit(u8* area, int index);
                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: error: variable or field 'setBit' declared void
 void setBit(u8* area, int index, bool value);
             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: error: 'u8' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: note: suggested alternative: 'p8'
 void setBit(u8* area, int index, bool value);
             ^~
             p8
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:17: error: 'area' was not declared in this scope
 void setBit(u8* area, int index, bool value);
                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:17: note: suggested alternative: 'read'
 void setBit(u8* area, int index, bool value);
                 ^~~~
                 read
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:23: error: expected primary-expression before 'int'
 void setBit(u8* area, int index, bool value);
                       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:34: error: expected primary-expression before 'bool'
 void setBit(u8* area, int index, bool value);
                                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:6:1: error: 'u16' does not name a type; did you mean 'p16'?
 u16 _D[DATA_SIZE];
 ^~~
 p16
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:18:36: err

arduino:megaavr:nona4809 @ 1.8.7

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib515737403/test/test.ino:1:10: fatal error: ModbusRTU_Slave_RS485.h: No such file or directory
 #include <ModbusRTU_Slave_RS485.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/SimpleModbus

Result: FAIL

WARNING: library ModbusRTU_Slave_RS485 claims to run on avr architecture(s) and may be incompatible with your current board which runs on megaavr architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:10:3: error: 'u16' does not name a type
   u16 addr;
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:12:3: error: 'u16' does not name a type
   u16 *values;
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:13:33: error: expected ')' before 'Address'
   ModbusRTUSlaveWordAddress(u16 Address, u16* value, int cnt);
                                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:19:3: error: 'u16' does not name a type
   u16 addr;
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:21:3: error: 'u8' does not name a type
   u8 *values;
   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:22:32: error: expected ')' before 'Address'
   ModbusRTUSlaveBitAddress(u16 Address, u8* value, int cnt);
                                ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:28:53: error: 'u8' has not been declared
   ModbusRTUSlave(byte slaveId, HardwareSerial *ser, u8 conrolPinNumber);
                                                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:30:23: error: 'u16' has not been declared
   boolean addWordArea(u16 Address, u16* values, int cnt);
                       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:30:36: error: 'u16' has not been declared
   boolean addWordArea(u16 Address, u16* values, int cnt);
                                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:31:22: error: 'u16' has not been declared
   boolean addBitArea(u16 Address, u8* values, int cnt);
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:31:35: error: 'u8' has not been declared
   boolean addBitArea(u16 Address, u8* values, int cnt);
                                   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:37:3: error: 'u8' does not name a type
   u8 const controlPin;
   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:30: error: expected ';' at end of member declaration
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:49: error: expected ')' before 'Addr'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:29: error: expected ';' at end of member declaration
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:47: error: expected ')' before 'Addr'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:30: error: expected ';' at end of member declaration
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:45: error: redeclaration of 'ModbusRTUSlaveWordAddress* ModbusRTUSlave::getWordAddress'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                                             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:45: note: previous declaration 'ModbusRTUSlaveWordAddress* ModbusRTUSlave::getWordAddress'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                                             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:49: error: expected ')' before 'Addr'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:29: error: expected ';' at end of member declaration
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:43: error: redeclaration of 'ModbusRTUSlaveBitAddress* ModbusRTUSlave::getBitAddress'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                                           ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:43: note: previous declaration 'ModbusRTUSlaveBitAddress* ModbusRTUSlave::getBitAddress'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                                           ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:47: error: expected ')' before 'Addr'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:16: error: 'u8' was not declared in this scope
 boolean getBit(u8* area, int index);
                ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:20: error: 'area' was not declared in this scope
 boolean getBit(u8* area, int index);
                    ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:20: note: suggested alternative: 'fread'
 boolean getBit(u8* area, int index);
                    ^~~~
                    fread
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:26: error: expected primary-expression before 'int'
 boolean getBit(u8* area, int index);
                          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: error: variable or field 'setBit' declared void
 void setBit(u8* area, int index, bool value);
             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: error: 'u8' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:17: error: 'area' was not declared in this scope
 void setBit(u8* area, int index, bool value);
                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:17: note: suggested alternative: 'fread'
 void setBit(u8* area, int index, bool value);
                 ^~~~
                 fread
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:23: error: expected primary-expression before 'int'
 void setBit(u8* area, int index, bool value);
                       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:34: error: expected primary-expression before 'bool'
 void setBit(u8* area, int index, bool value);
                                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:6:1: error: 'u16' does not name a type
 u16 _D[DATA_SIZE];
 ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:18:36: error: '_D' was not declared in this scope
   rtu.addWordArea(VIRTUAL_ADDRESS, _D, DATA_SIZE);
                                    ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:18:36: note: suggested alternative: 'PD'
   rtu.addWordArea(VIRTUAL_ADDRESS, _D, DATA_SIZE);
                                    ^~
                                    PD
Multiple libraries were found for "ModbusRTUSlave.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave

arduino:samd:mkrwifi1010 @ 1.8.12

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3312947811/test/test.ino:1:10: fatal error: ModbusRTU_Slave_RS485.h: No such file or directory
 #include <ModbusRTU_Slave_RS485.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

examples/SimpleModbus

Result: FAIL

WARNING: library ModbusRTU_Slave_RS485 claims to run on avr architecture(s) and may be incompatible with your current board which runs on samd architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/utility/LinkedList.h:311:3: error: redeclaration of 'T LinkedList<T>::get(int, bool)' may not have default arguments [-fpermissive]
 T LinkedList<T>::get(int index, bool useCached = false){
   ^~~~~~~~~~~~~
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:10:3: error: 'u16' does not name a type
   u16 addr;
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:12:3: error: 'u16' does not name a type
   u16 *values;
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:13:33: error: expected ')' before 'Address'
   ModbusRTUSlaveWordAddress(u16 Address, u16* value, int cnt);
                                 ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:19:3: error: 'u16' does not name a type
   u16 addr;
   ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:21:3: error: 'u8' does not name a type
   u8 *values;
   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:22:32: error: expected ')' before 'Address'
   ModbusRTUSlaveBitAddress(u16 Address, u8* value, int cnt);
                                ^~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:28:53: error: 'u8' has not been declared
   ModbusRTUSlave(byte slaveId, HardwareSerial *ser, u8 conrolPinNumber);
                                                     ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:30:23: error: 'u16' has not been declared
   boolean addWordArea(u16 Address, u16* values, int cnt);
                       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:30:36: error: 'u16' has not been declared
   boolean addWordArea(u16 Address, u16* values, int cnt);
                                    ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:31:22: error: 'u16' has not been declared
   boolean addBitArea(u16 Address, u8* values, int cnt);
                      ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:31:35: error: 'u8' has not been declared
   boolean addBitArea(u16 Address, u8* values, int cnt);
                                   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:37:3: error: 'u8' does not name a type
   u8 const controlPin;
   ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:30: error: expected ';' at end of member declaration
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:49: error: expected ')' before 'Addr'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:29: error: expected ';' at end of member declaration
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:47: error: expected ')' before 'Addr'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:30: error: expected ';' at end of member declaration
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                              ^~~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:45: error: redeclaration of 'ModbusRTUSlaveWordAddress* ModbusRTUSlave::getWordAddress'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                                             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:45: note: previous declaration 'ModbusRTUSlaveWordAddress* ModbusRTUSlave::getWordAddress'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                                             ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:49: error: expected ')' before 'Addr'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                                                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:29: error: expected ';' at end of member declaration
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                             ^~~~~~~~~~~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:43: error: redeclaration of 'ModbusRTUSlaveBitAddress* ModbusRTUSlave::getBitAddress'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                                           ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:43: note: previous declaration 'ModbusRTUSlaveBitAddress* ModbusRTUSlave::getBitAddress'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                                           ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:47: error: expected ')' before 'Addr'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                                               ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:16: error: 'u8' was not declared in this scope
 boolean getBit(u8* area, int index);
                ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:20: error: 'area' was not declared in this scope
 boolean getBit(u8* area, int index);
                    ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:20: note: suggested alternative: 'fread'
 boolean getBit(u8* area, int index);
                    ^~~~
                    fread
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:26: error: expected primary-expression before 'int'
 boolean getBit(u8* area, int index);
                          ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:35: error: expression list treated as compound expression in initializer [-fpermissive]
 boolean getBit(u8* area, int index);
                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: error: variable or field 'setBit' declared void
 void setBit(u8* area, int index, bool value);
             ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: error: 'u8' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:17: error: 'area' was not declared in this scope
 void setBit(u8* area, int index, bool value);
                 ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:17: note: suggested alternative: 'fread'
 void setBit(u8* area, int index, bool value);
                 ^~~~
                 fread
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:23: error: expected primary-expression before 'int'
 void setBit(u8* area, int index, bool value);
                       ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:34: error: expected primary-expression before 'bool'
 void setBit(u8* area, int index, bool value);
                                  ^~~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:6:1: error: 'u16' does not name a type
 u16 _D[DATA_SIZE];
 ^~~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:18:36: error: '_D' was not declared in this scope
   rtu.addWordArea(VIRTUAL_ADDRESS, _D, DATA_SIZE);
                                    ^~
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:18:36: note: suggested alternative: '_P'
   rtu.addWordArea(VIRTUAL_ADDRESS, _D, DATA_SIZE);
                                    ^~
                                    _P
Multiple libraries were found for "ModbusRTUSlave.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485
  Not used: /home/ec2-user/ardui

esp32:esp32:d1_mini32 @ 1.0.6

Inclusion

Result: FAIL
This library has no main header file so an empty one was created.

/tmp/arduino-testlib3542866483/test/test.ino:1:35: fatal error: ModbusRTU_Slave_RS485.h: No such file or directory
compilation terminated.

examples/SimpleModbus

Result: FAIL

WARNING: library ModbusRTU_Slave_RS485 claims to run on avr architecture(s) and may be incompatible with your current board which runs on esp32 architecture(s).
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:5:0,
                 from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:1:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/utility/LinkedList.h:311:55: error: redeclaration of 'T LinkedList<T>::get(int, bool)' may not have default arguments [-fpermissive]
 T LinkedList<T>::get(int index, bool useCached = false){
                                                       ^
In file included from /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:1:0:
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:10:3: error: 'u16' does not name a type
   u16 addr;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:12:3: error: 'u16' does not name a type
   u16 *values;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:13:33: error: expected ')' before 'Address'
   ModbusRTUSlaveWordAddress(u16 Address, u16* value, int cnt);
                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:19:3: error: 'u16' does not name a type
   u16 addr;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:21:3: error: 'u8' does not name a type
   u8 *values;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:22:32: error: expected ')' before 'Address'
   ModbusRTUSlaveBitAddress(u16 Address, u8* value, int cnt);
                                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:28:53: error: 'u8' has not been declared
   ModbusRTUSlave(byte slaveId, HardwareSerial *ser, u8 conrolPinNumber);
                                                     ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:30:23: error: 'u16' has not been declared
   boolean addWordArea(u16 Address, u16* values, int cnt);
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:30:36: error: 'u16' has not been declared
   boolean addWordArea(u16 Address, u16* values, int cnt);
                                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:31:22: error: 'u16' has not been declared
   boolean addBitArea(u16 Address, u8* values, int cnt);
                      ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:31:35: error: 'u8' has not been declared
   boolean addBitArea(u16 Address, u8* values, int cnt);
                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:37:3: error: 'u8' does not name a type
   u8 const controlPin;
   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:30: error: expected ';' at end of member declaration
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:49: error: expected ')' before 'Addr'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:29: error: expected ';' at end of member declaration
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:47: error: expected ')' before 'Addr'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:30: error: expected ';' at end of member declaration
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                              ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:45: error: redeclaration of 'ModbusRTUSlaveWordAddress* ModbusRTUSlave::getWordAddress'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:42:45: note: previous declaration 'ModbusRTUSlaveWordAddress* ModbusRTUSlave::getWordAddress'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr);
                                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:44:49: error: expected ')' before 'Addr'
   ModbusRTUSlaveWordAddress* getWordAddress(u16 Addr,u16 Len);
                                                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:29: error: expected ';' at end of member declaration
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:43: error: redeclaration of 'ModbusRTUSlaveBitAddress* ModbusRTUSlave::getBitAddress'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:43:43: note: previous declaration 'ModbusRTUSlaveBitAddress* ModbusRTUSlave::getBitAddress'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr);
                                           ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:45:47: error: expected ')' before 'Addr'
   ModbusRTUSlaveBitAddress* getBitAddress(u16 Addr,u16 Len);
                                               ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:16: error: 'u8' was not declared in this scope
 boolean getBit(u8* area, int index);
                ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:20: error: 'area' was not declared in this scope
 boolean getBit(u8* area, int index);
                    ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:26: error: expected primary-expression before 'int'
 boolean getBit(u8* area, int index);
                          ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:97:35: error: expression list treated as compound expression in initializer [-fpermissive]
 boolean getBit(u8* area, int index);
                                   ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: error: variable or field 'setBit' declared void
 void setBit(u8* area, int index, bool value);
             ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:13: error: 'u8' was not declared in this scope
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:17: error: 'area' was not declared in this scope
 void setBit(u8* area, int index, bool value);
                 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:23: error: expected primary-expression before 'int'
 void setBit(u8* area, int index, bool value);
                       ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/ModbusRTUSlave.h:98:34: error: expected primary-expression before 'bool'
 void setBit(u8* area, int index, bool value);
                                  ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:6:1: error: 'u16' does not name a type
 u16 _D[DATA_SIZE];
 ^
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino: In function 'void setup()':
/home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485/examples/SimpleModbus/SimpleModbus.ino:18:36: error: '_D' was not declared in this scope
   rtu.addWordArea(VIRTUAL_ADDRESS, _D, DATA_SIZE);
                                    ^
Multiple libraries were found for "ModbusRTUSlave.h"
  Used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave_RS485
  Not used: /home/ec2-user/arduino-testlib/cli-datadir/user/libraries/ModbusRTU_Slave